Skip to main content
Log in

Preparation and properties of one-component self-cross-linking stabilized epoxy-acrylate composite emulsion

  • Original Contribution
  • Published:
Colloid and Polymer Science Aims and scope Submit manuscript

Abstract

Against at the contradiction between their stability and the corrosion resistance of epoxy-acrylate composite emulsion, the modified epoxy containing terminal double bond and retaining partial epoxy group was gained using active hydrogen acrylic monomers to react with epoxy resin. Then, a three-layer waterborne epoxy-acrylate composite emulsion which contains modified epoxy resin acrylate polymer(core)-inert polyacrylate(middle)-carboxyl acrylate polymer(shell) structure was prepared using emulsion polymerization via structure design idea. By studying the influence of the content of the modified epoxy resin in the core layer and methyl acrylic acid (MAA) in the shell layer of the latex particle on the composite emulsion stability and corrosion resistance controllability, a suitable composition was determined. The structure of the obtained latex was characterized by FTIR and TEM. The stability of the composite latex was characterized by zeta potential, average particle size, and storage stability. And the corrosion resistance of the composite latex films was analyzed by electrochemical AC impedance spectroscopy and salt spray tests. In addition, the self-cross-linking behavior and properties of composite emulsion were studied. The results showed that the epoxy-acrylate composite emulsion with best stability and corrosion resistance was obtained when the modified epoxy resin in the core layer was 10 wt% and MAA in the shell layer was 1wt% of the total monomer weight. This film exhibited a Rct value 1.49 × 107 Ω cm2 after being soaked in 3.5wt% NaCl for 1 day and dropped by one order of magnitude after 7 days. The FTIR, DSC, and SEM results reveal that self-cross-linking reaction occurs between epoxy groups in the core layer with carboxyl groups in the shell layer during film formation. The outstanding stability as well as corrosion resistance is attributable to the cross-linking reticulation structure. It is a new strategy for improving the corrosion resistance of the film through emulsion’s intrinsic properties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

Availability of data and materials

The datasets generated and/or analyzed during the current study are available from the corresponding author on reasonable request. All materials provided by the corresponding author.

References

  1. Hao L, Zhang S, Dong J et al (2011) Atmospheric corrosion resistance of MnCuP weathering steel in simulated environments. Corros Sci 53(12):4187–4192

    Article  CAS  Google Scholar 

  2. Chen C, Xiao G, He Y et al (2020) Bio-inspired superior barrier self-healing coating: self-assemble of graphene oxide and polydopamine-coated halloysite nanotubes for enhancing corrosion resistance of waterborne epoxy coating. Prog Org Coat 139:105402

    Article  CAS  Google Scholar 

  3. Liu T, Li J, Li X et al (2019) Effect of self-assembled tetra aniline nanofiber on the anticorrosion performance of waterborne epoxy coating. Prog Org Coat 128:137–147

    Article  CAS  Google Scholar 

  4. Li J, Chen P, Wang Y et al (2021) Corrosion resistance of surface texturing epoxy resin coatings reinforced with fly ash cenospheres and multiwalled carbon nanotubes. Prog Org Coat 158:106388

    Article  CAS  Google Scholar 

  5. Xia Z, Liu G, Dong Y et al (2019) Anticorrosive epoxy coatings based on polydopamine modified molybdenum disulfide. Prog Org Coat 133:154–160

    Article  CAS  Google Scholar 

  6. Cui M, Ren S, Chen J et al (2017) Anticorrosive performance of waterborne epoxy coatings containing water-dispersible hexaonal boron nitride (h-BN) nanosheets. Appl Surf Sci 397:77–86

    Article  ADS  CAS  Google Scholar 

  7. Mei Y, Xu J, Jiang L et al (2019) Enhancing corrosion resistance of epoxy coating on steel reinforcement by aminobenzoate intercalated layered double hydroxides. Prog Org Coat 134:288–296

    Article  CAS  Google Scholar 

  8. Wang T, Song B, Wang L (2020) A new filler for epoxy resin: study on the properties of graphite carbon nitride (g-C3N4) reinforced epoxy resin composites. Polymers 12(1):76

  9. Li S, Huang H, Chen F et al (2021) Reinforced anticorrosion performance of waterborne epoxy coating with eco-friendly L-cysteine modified Ti3C2Tx MXene nanosheets Prog. Org Coat 161:106478

    Article  CAS  Google Scholar 

  10. Ye Y, Chen H, Zou Y et al (2021) Study on self-healing and corrosion resistance behaviors of functionalized carbon dot-intercalated graphene-based waterborne epoxy coating. J Mater Sci Technol 67:226–236

    Article  CAS  Google Scholar 

  11. Wu H, Zhang L, Zhang Y et al (2020) Corrosion behavior of Mg–Al LDH film in-situ assembled with graphene on Mg alloy pre-sprayed Al layer. J Alloys Compd 834(5):155107

    Article  CAS  Google Scholar 

  12. Wang D, Song L, Zhou K et al (2015) Anomalous nano-barrier effects of ultrathin molybdenum disulfide nanosheets for improving the flame retardance of polymer nanocomposites. J Mater Chem A 3(27):14307–14317

    Article  CAS  Google Scholar 

  13. Jiao C, Sun L, Shao Q et al (2021) Advances in waterborne acrylic resins: synthesis principle, modification strategies, and their applications. ACS Omega 6:2443–2449

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  14. Zhou Y, Chen G, Yan S (2022) Epoxy composite coating with excellent anticorrosion and self-healing properties based on acrylate copolymers. Prog Org Coat 172:107098

    Article  CAS  Google Scholar 

  15. Yan R, Liu Y, Liu B et al (2018) Improved performance of dual-cured organosolv lignin-based epoxy acrylate coatings. Compos Commun 10:52–56

    Article  ADS  Google Scholar 

  16. Yang J, Mu Y, Li D (2022) Morphology of multilayer core-shell emulsion: Influence of crosslinking agent. Mater Lett 322:132493

    Article  CAS  Google Scholar 

  17. Zahedi F, Amraei I, Fathizade M (2015) Investigation of dynamic-mechanical properties of multilayer latex IPNs (MLIPNs) with core/shell morphology: Synthesis and characterization. Polymer 83:162–171

    Article  Google Scholar 

  18. Liu W, Wu M, Ma C et al (2022) Efficient miniemulsion polymerization of plant oil-based acrylate monomer toward waterborne epoxy resins. ACS Sustain Chem Eng 10:13301–13309

    Article  CAS  Google Scholar 

  19. Javaheriannaghash H, Johari B (2011) Retracted: synthesis and characterization of an acrylate-containing siliconized epoxy hybrid oligomer and its emulsion copolymerization with vinyl acetate/2-ethylhexylacrylate monomers. Prog Org Coat 73:155–161

    Article  Google Scholar 

  20. Duan Y, Huo Y, Duan L et al (2017) Preparation of acrylic resins modified with epoxy resins and their behaviors as binders of waterborne printing ink on plastic film. Colloids Surf A Physicochem Eng Asp 535(20):225–231

    Article  CAS  Google Scholar 

  21. Woo J, Toman A (1993) Water-based epoxy-acrylic graft copolymer. Prog Org Coat 21:371–385

    Article  CAS  Google Scholar 

  22. Liang S, Xu K, Liu H et al (2019) Preparation and characterization of dimer fatty acid epoxy-acrylate resin hybrid emulsion for photocurable coatings. Colloid Polym Sci 297(9):1199–1211

    Article  CAS  Google Scholar 

  23. Yu J, Pan H, Zhou X (2014) Preparation of waterborne phosphated acrylate–epoxy hybrid dispersions and their application as coil coating primer[J]. Coat Technol Res 11(3):361–369

    Article  CAS  Google Scholar 

  24. Zhang K, Fu H, Huang H et al (2007) Waterborne epoxy-acrylic dispersions modified by siloxane. J Dispers Sci Technol 28:1209–1217

    Article  CAS  Google Scholar 

  25. Wang X, Cui Y, Wang Y et al (2021) Preparation and characteristics of crosslinked fluorinated acrylate modified waterborne polyurethane for metal protection coating. Prog Org Coat 158:106371

    Article  CAS  Google Scholar 

  26. Sun M, Ma Z, Li A et al (2020) Anticorrosive performance of polyaniline/waterborne epoxy/poly(methylhydrosiloxane) composite coatings. Prog Org Coat 139:105462

    Article  CAS  Google Scholar 

  27. Zhong L, Zhu J, Li F (2021) Synthesis and properties of self-crosslinking waterborne polyurethane with side chain for water-based varnish. Prog Org Coat 150:105972

    Article  Google Scholar 

  28. Yang Y, Gao Y, Wang X et al (2022) Preparation and properties of a self-crosslinking styrene acrylic emulsion using amino-functional graphene oxide as a crosslinking agent and anti-corrosion filler. J Mater Res Technol 16:1814–1823

    Article  CAS  Google Scholar 

  29. Wang S, Yang J, Zhang J (2018) Research progress in waterborne epoxy resin curing agent. Paint Coat Ind 48(8):55–60

    CAS  Google Scholar 

  30. He L, Liu L, Cao C et al (2021) Improved curing performances of epoxy resin by a structure-controllable self-emulsifying curing agent. J Adhes Sci Technol 36(5):490–506

    Article  Google Scholar 

  31. Kunal W, Mukesh K, Anagha S (2018) Anticorrosive and insulating properties of cardanol based anhydride curing agent for epoxy coatings. React Funct Polym 122:148–157

  32. Zhang K, Huang C, Fang Q et al (2017) Synthesis of a self-emulsifiable waterborne epoxy curing agent based on glycidyl tertiary carboxylic ester and its cure characteristics. J Appl Polym Sci 134(16)

  33. Qiu Z, Wang L, Wu J et al (2020) Study the synthesis and the properties of self-crosslinking acrylic latex via a novel fluorescent labeling method. J Appl Polym Sci 138(10):49973

    Article  Google Scholar 

  34. Parvate S, Mahanwar P (2019) Advances in self-crosslinking of acrylic emulsion: what we know and what we would like to know. J Dispers Sci Technol 40(4):519–536

    Article  CAS  Google Scholar 

  35. Liu M, Mao X, Zhu H et al (2013) Water and corrosion resistance of epoxy–acrylic–amine waterborne coatings: effects of resin molecular weight, polar group and hydrophobic segment[J]. Corros Sci 75:106–113

    Article  CAS  Google Scholar 

  36. Wang X, Wang J, Li Q et al (2013) Synthesis and characterization of waterborne epoxy–acrylic corrosion-resistant coatings[J]. J Macromol Sci Phys 52(2):751–761

    Article  CAS  Google Scholar 

  37. Liu L, Li J, Zhang X et al (2014) The preparation of a three-layer “core–shell” structured epoxy-acrylate emulsion[J]. RSC Adv 4(88):47184–47190

    Article  ADS  CAS  Google Scholar 

  38. Zhang K, Chen X, Xiao Y et al (2021) Enhanced anticorrosion properties through structured particle design of waterborne epoxy-styrene-acrylate composite emulsion. Coatings 11(11):1422

    Article  CAS  Google Scholar 

  39. Chen X, Xiao Y, Liu R et al (2022) Controlled preparation of multilayer core-shell waterborne epoxy-acrylate composite emulsion and its anticorrosion properties. Polym Mater Sci Eng 38(12):1–10

    Google Scholar 

  40. Wang J, Du P, Zhao H et al (2019) Novel nitrogen doped carbon dots enhancing the anticorrosive performance of waterborne epoxy coatings. Nanoscale Adv 1:3443–3451

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

Download references

Funding

This work was supported by the National Natural Science Foundation of China (Grant No. 21808078).

Author information

Authors and Affiliations

Authors

Contributions

Xifang Chen: writing—review and editing, writing—original draft, validation, methodology, investigation, and data curation. Yuling Xiao: writing—original draft, validation, investigation, and data curation. Rujia Liu: writing—original draft, validation, investigation, and data curation. Kai Zhang: situation analysis, project management, supervision, writing—review and editing, resources, and funding acquisition. Jun Zhao: situation analysis, writing—review and editing, and supervision.

Corresponding authors

Correspondence to Kai Zhang or Jun Zhao.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Conflict of interest

The authors declare no conflict of interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Information

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Chen, X., Xiao, Y., Liu, R. et al. Preparation and properties of one-component self-cross-linking stabilized epoxy-acrylate composite emulsion. Colloid Polym Sci 302, 289–302 (2024). https://doi.org/10.1007/s00396-023-05163-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00396-023-05163-5

Keywords

Navigation