Abstract
Metal additive manufacturing (AM) has the advantages of novel part morphology, new material property, and short production cycle, attracting significant attention in automobile, aerospace, and other fields. Nevertheless, the repeatability and stability of part quality are difficult to guarantee in the current metal AM process, hindering the development of metal AM technology. Vital process variables such as molten pool characteristics, spatter characteristics, surface morphology, and radiation temperature are directly related to the quality of parts. Monitoring the dynamic changes vital variables is critical. Image processing techniques such as image transformation, recognition, segmentation, and enhancement are introduced to obtain manufacturing process information through processing and analyzing rich image features. The monitoring system’s processing results are usually collected in real time to help solve the repeatability and stability problems of the metal AM process. Presently, in situ and real-time monitoring methods are the most popular, and unfortunately, the literature lacks a comprehensive report. Thus, this paper thoroughly describes in situ and real-time process monitoring on the basis of image processing for metal AM. This paper reviews the in situ and real-time monitoring on the basis of traditional image processing to analyze monitoring objects, process classifications, and image processing carriers. Then, the advantages and disadvantages of in situ and real-time monitoring of metal AM based on artificial intelligence are discussed and compared. Finally, image processing algorithm generalization, quality, small samples, and image labeling problems are analyzed and discussed. A technical route for metal AM real-time feedback control is proposed by combining image processing with other technologies.
Similar content being viewed by others
Availability of data and material
Not applicable.
Code availability
Not applicable.
References
Lu B, Li D, Tian X (2015) Development trends in additive manufacturing and 3D printing. Engineering-prc 1:85–89
Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–392
Wang Y, Zheng P, Peng T, Yang H, Zou J (2020) Smart additive manufacturing: current artificial intelligence-enabled methods and future perspectives. Sci China Technol Sc 63:1600–1611
Gardan J (2016) Additive manufacturing technologies: state of the art and trends. Int J Prod Res 54:3118–3132
Liu L, Ding Q, Zhong Y, Zou J, Wu J, Chiu Y, Li J, Zhang Z, Yu Q, Shen Z (2018) Dislocation network in additive manufactured steel breaks strength–ductility trade-off. Mater Today 21:354–361
Kruth JP, Mercelis P, Van Vaerenbergh J, Froyen L, Rombouts M (2005) Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping J 11:26–36
Rafi HK, Karthik NV, Gong H, Starr TL, Stucker BE (2013) Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting. J Mater Eng Perform 22:3872–3883
Zhan Q, Liang Y, Ding J, Williams S (2017) A wire deflection detection method based on image processing in wire + arc additive manufacturing. Int J Adv Manuf Tech 89:755–763
Lia F, Park JZ, Keist JS, Joshi S, Martukanitz RP (2018) Thermal and microstructural analysis of laser-based directed energy deposition for Ti-6Al-4V and Inconel 625 deposits. Mater Sci Eng A 717:1–10
Tapia G, Elwany A (2014) A review on process monitoring and control in metal-based additive manufacturing. J Manuf Sci E-T Asme 136:060801
Zhang Y, Mi J, Li H, Shen S, Yang Y, Song C, Zhou X (2022) In-situ monitoring plasma arc additive manufacturing process with fully convolutional network. Int J Adv Manuf Tech 120:2247–2257
Angelo LD, Stefano PD, Guardiani E (2020) Search for the optimal build direction in additive manufacturing technologies: a review. J Manuf Mater Process 4:71
Tino R, Leary M, Yeo A, Kyriakou E, Kron T, Brandt M (2020) Additive manufacturing in radiation oncology: A review of clinical practice, emerging trends and research opportunities. Int J Extrem Manuf 2:012003
Varela J, Merino J, Pickett C, Abu-Issa A, Arrieta E, Murr L, Wicker R, Ahlfors M, Godfrey D, Medina F (2020) Performance characterization of laser powder bed fusion fabricated inconel 718 treated with experimental hot isostatic processing cycles. J Manuf Mater Process 4:73
Leung CLA, Marussi S, Towrie M, Atwood RC, Withers PJ, Lee PD (2019) The effect of powder oxidation on defect formation in laser additive manufacturing. Acta Mater 166:294–305
Cerniglia D, Montinaro N (2018) Defect detection in additively manufactured components: laser ultrasound and laser thermography comparison. Procedia Struct Integr 8:154–162
Hossain MS, Taheri H (2020) In situ process monitoring for additive manufacturing through acoustic techniques. J Mater Eng Perform 29:6249–6262
Leung CLA, Marussi S, Atwood RC, Towrie M, Withers PJ, Lee PD (2018) In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing. Nat Commun 9:1–9
Koester LW, Taheri H, Bigelow TA, Bond LJ, Faierson EJ (2018) In-situ acoustic signature monitoring in additive manufacturing processes. In AIP Conference Proceedings 1949:020006
Donadello S, Motta M, Demir AG, Previtali B (2019) Monitoring of laser metal deposition height by means of coaxial laser triangulation. Opt Lasers Eng 112:136–144
Li J, Duan Q, Hou J, Xie H, Liu S (2020) In-situ monitoring of substrate deformation in directed energy deposition process using the coherent gradient sensing method. Addit Manuf 36:101547
Min Y, Shen S, Li H, Sheng L, Mi J, Zhou J, Mai H, Chen J (2022) Online monitoring of an additive manufacturing environment using a time-of-flight mass spectrometer. Measurement 189:110473
Huang TS, Schreiber WF, Tretiak OJ (1971) Image processing. In Proceedings of the IEEE 59:1586–1609
Sarid O, Huss E (2011) Image formation and image transformation. Art Psychother 38:252–255
He K, Zhang X, Ren S, Sun J (2016) Deep residual learning for image recognition. In Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition 770–778.
Cheng HD, Jiang XH, Sun Y, Wang J (2001) Color image segmentation: advances and prospects. Pattern Recogn 34:2259–2281
Wang DCC, Vagnucci AH, Li CC (1983) Digital image enhancement: a survey. Comput Vision, Graph Image Process 24:363–381
Everton SK, Hirsch M, Stavroulakis PI, Leach RK, Clare AT (2016) Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Mater Des 95:431–445
Cunha FG, Santos TG, Xavier J (2021) In situ monitoring of additive manufacturing using digital image correlation: a review. Mater 14:1511
Hofman JT, Pathiraj B, Van Dijk V, De Lange DF, Meijer J (2012) A camera based feedback control strategy for the laser cladding process. J Mater Process Technol 212:2455–2462
Moralejo S, Penaranda X, Nieto S, Barrios A, Arrizubieta I, Tabernero I, Figueras J (2017) A feedforward controller for tuning laser cladding melt pool geometry in real time. Int J Adv Manuf Tech 89:821–831
Song L, Wang F, Li S, Han X (2017) Phase congruency melt pool edge extraction for laser additive manufacturing. J Mater Process Technol 250:261–269
Yang Q, Yuan Z, Zhi X, Yan Z, Tian H, Chen X (2020) Real-time width control of molten pool in laser engineered net shaping based on dual-color image. Opt Laser Technol 123:105925
Seltzer D, Schiano J L, Nassar A R, Reutzel E W (2016) Illumination and image processing for real-time control of directed energy deposition additive manufacturing. In Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 1479–1486.
Craeghs T, Clijsters S, Yasa E, Kruth J P (2011) Online quality control of selective laser melting. In Proceedings of the 20th Solid Freeform Fabrication (SFF) Symposium 212–226.
Clijsters S, Craeghs T, Buls S, Kempen K, Kruth JP (2014) In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system. Int J Adv Manuf Tech 75:1089–1101
Zhang Y, Fuh JYH, Ye D, Hong GS (2019) In-situ monitoring of laser-based PBF via off-axis vision and image processing approaches. Addit Manuf 25:263–274
Asselin M, Toyserkani E, Iravani-Tabrizipour M, Khajepour A (2005) Development of trinocular CCD-based optical detector for real-time monitoring of laser cladding. In IEEE International Conference Mechatronics and Automation 3:1190–1196
Biegler M, Graf B, Rethmeier M (2018) In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations. Addit Manuf 20:101–110
Yao B, Imani F, Sakpal AS, Reutzel EW, Yang H (2018) Multifractal analysis of image profiles for the characterization and detection of defects in additive manufacturing. J Manuf Sci E-T Asme 140:031014
Barua S, Liou F, Newkirk J, Sparks T (2014) Vision-based defect detection in laser metal deposition process. Rapid Prototyp J 20:77–86
Khanzadeh M, Tian W, Yadollahi A, Doude HR, Tschopp MA, Bian L (2018) Dual process monitoring of metal-based additive manufacturing using tensor decomposition of thermal image streams. Addit Manuf 23:443–456
Khanzadeh M, Chowdhury S, Marufuzzaman M, Tschopp MA, Bian L (2018) Porosity prediction: Supervised-learning of thermal history for direct laser deposition. J Manuf Syst 47:69–82
Zhang B, Liu S, Shin YC (2019) In-process monitoring of porosity during laser additive manufacturing process. Addit Manuf 28:497–505
Mi J, Zhang Y, Li H, Shen S, Yang Y, Song C, Zhou X, Duan Y, Lu J, Mai H (2021) In-situ monitoring laser based directed energy deposition process with deep convolutional neural network. J Intell Manuf. https://doi.org/10.1007/s10845-021-01820-0
Yang Z, Lu Y, Yeung H, Krishnamurty S (2019) Investigation of deep learning for real-time melt pool classification in additive manufacturing. In 2019 IEEE 15th International Conference on Automation Science and Engineering (case) 640–647.
Fang Q, Tan Z, Li H, Song C, Zhou X, Yang Y, Shen S (2021) In-situ capture of melt pool signature in selective laser melting using U-Net-based convolutional neural network. J Manuf Process 648:347–355
Tan Z, Fang Q, Li H, Liu S, Zhu W, Yang D (2020) Neural network based image segmentation for spatter extraction during laser-based powder bed fusion processing. Opt Laser Technol 130:106347
Yang D, Li H, Liu S, Song C, Yang Y, Shen S, Lu J, Liu Z, Zhu Y (2020) In situ capture of spatter signature of SLM process using maximum entropy double threshold image processing method based on genetic algorithm. Opt Laser Technol 131:106371
Wang Y, Zhang C, Lu J, Bai L, Zhao Z, Han J (2020) Weld reinforcement analysis based on long-term prediction of molten pool image in additive manufacturing. IEEE Access 8:69908–69918
Lu J, He H, Shi Y, Bai L, Zhao Z, Han J (2021) Quantitative prediction for weld reinforcement in arc welding additive manufacturing based on molten pool image and deep residual network. Addit Manuf 41:101980
Caggiano A, Zhang J, Alfieri V, Caiazzo F, Gao R, Teti R (2019) Machine learning-based image processing for on-line defect recognition in additive manufacturing. Cirp Ann-Manuf Techn 68:451–454
Scime L, Siddel D, Baird S, Paquit V (2020) Layer-wise anomaly detection and classification for powder bed additive manufacturing processes: a machine-agnostic algorithm for real-time pixel-wise semantic segmentation. Addit Manuf 36:101453
Colosimo BM, Grasso M (2018) Spatially weighted PCA for monitoring video image data with application to additive manufacturing. J Qual Technol 50:391–417
Li X, Siahpour S, Lee J, Wang Y, Shi J (2020) Deep learning-based intelligent process monitoring of directed energy deposition in additive manufacturing with thermal images. Procedia Manuf 48:643–649
Dong C, Loy CC, He K, Tang X (2016) Image super-resolution using deep convolutional networks. IEEE T Pattern Anal 38:295–307
Kitamura G, Chung CY, Moore BE (2019) Ankle fracture detection utilizing a convolutional neural network ensemble implemented with a small sample, de novo training, and multiview incorporation. J Digit Imaging 32:672–677
Gao Y, Gao L, Li X (2019) A hierarchical feature fusion-based method for defect recognition with a small sample. In IEEE International Conference on Industrial Engineering and Engineering Management 1048–1052
Li X, Yu L, Chen H, Fu C W, Heng P A (2018) Semi-supervised skin lesion segmentation via transformation consistent self-ensembling model. arXiv preprint arXiv:1412.7062
Luo X, Chen J, Song T, Wang G (2020) Semi-supervised medical image segmentation through dual-task consistency. arXiv preprint arXiv:2009.04448
Funding
This work was supported by the Key Research and Development Program of Sichuan Province, China (2020YFSY0054).
Author information
Authors and Affiliations
Contributions
Yikai Zhang: conceptualization, methodology, formal analysis, data curation, visualization. Shengnan Shen: writing—review and editing, supervision. Hui Li: writing—review and editing. Yaowu Hu: writing—review and editing.
Corresponding authors
Ethics declarations
Ethics approval
The authors confirm that the submitted work is original and has not been published elsewhere.
Consent to participate
All authors have agreed to participate in this research.
Consent for publication
All authors have informed and agreed to publish this research.
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhang, Y., Shen, S., Li, H. et al. Review of in situ and real-time monitoring of metal additive manufacturing based on image processing. Int J Adv Manuf Technol 123, 1–20 (2022). https://doi.org/10.1007/s00170-022-10178-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-022-10178-3