Skip to main content
SpringerLink
Log in

Investigation on droplet momentum in VPPA-GMAW hybrid welding of aluminum alloys

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Variable polarity plasma arc-gas metal arc welding (VPPA-GMAW) is a superior technology for welding thick plates of high-strength aluminum alloys. It integrates the advantages of energy focusing and high penetration depth in VPPA welding, and those of high welding efficiency and wide range of technological parameters in GMAW process. In this work, we investigated the droplet momentum in paraxial VPPA-GMAW hybrid welding of 7A52 aluminum alloys, and the technological parameters of welding process was also optimized. The images of droplet transfer were captured by high-speed camera, while the droplet speeds and sizes were statistically analyzed by t tests of independent samples. The results showed that the speeds of droplet arriving at the weld pool were significantly between GMAW and VPPA-GMAW processes, and the droplet speed increases with increasing plasma currents within a certain range. Meanwhile, the droplet momentum in VPPA-GMAW process is larger than that in conventional GMAW process. We also found that as the droplet momentum increased, the depression of weld pool grew more obvious and greatly facilitated the deep-penetration welding. In VPPA-GMAW process, it became more and more easier for the droplet to fall off the wire when the electromagnetic force gradually increased during pulse period. Droplet movement through the arc zone was further accelerated since the central pressure of arc column increased during base period. This research can provide some theoretical support for thick plate welding of high-strength aluminum alloys and help for deeper understanding of the hybrid arc coupling mechanism.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Thomsen JS (2006) Control of pulsed gas metal arc welding. Int J Model Identif Control 1(2):115–125

    Article  MathSciNet  Google Scholar 

  2. Wang XW, Huang Y, Zhang YM (2013) Droplet transfer model for laser-enhanced GMAW. Int J Adv Manuf Technol 64(1-4):207–217

    Article  Google Scholar 

  3. Mao YQ, Ke LM, Liu FC, Huang CP, Chen YH, Liu Q (2015) Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of 2060 aluminum lithium alloy. Int J Adv Manuf Technol 81(5-8):1419–1431

    Article  Google Scholar 

  4. Balasubramanian V, Ravisankar V, Reddy GM (2008) Effect of pulsed current welding on mechanical properties of high strength aluminum alloy. Int J Adv Manuf Technol 36(3-4):254–262

    Article  Google Scholar 

  5. Essers WG, Liefkens AC (1972) Plasma-MIG welding developed by Philips. Mach Prod Eng 1(11):632–633

    Google Scholar 

  6. Ono K, Liu ZJ, Era T, Uezono T, Ueyama T, Tanaka M, Nakata K (2009) Development of a plasma MIG welding system for aluminium. Weld Int 23(11):805–809

    Article  Google Scholar 

  7. Sevim I, Hayat F, Kaya Y, Kahraman N, Sahin S (2013) The study of MIG weldability of heat-treated aluminum alloys. Int J Adv Manuf Technol 66(9-12):1825–1834

    Article  Google Scholar 

  8. Yang T, Gao HM, Zhang SH, Wu L (2013) Interface behavior of copper and steel by plasma-MIG hybrid arc welding. Acta Metall Sin (Engl Lett) 26(3):328–332

    Article  Google Scholar 

  9. Hertel M, Fussel U, Schnick M (2014) Numerical simulation of the plasma-MIG process–interactions of the arcs, droplet detachment and weld pool formation. Weld World 58(1):85–92

    Article  Google Scholar 

  10. Bai Y, Gao HM, Lu H, Shi L (2006) Analysis of plasma-MIG arc signal based on LABVIEW. Trans China Weld Inst 27(8):59–62

    Google Scholar 

  11. Bai Y, Gao HM, Qiu L (2010) Droplet transition for plasma-MIG welding on aluminium alloys. Trans Nonferrous Met Soc China 20(12):2234–2239

    Article  Google Scholar 

  12. Ton H (1975) Physical properties of the plasma-MIG welding arc. J Phys D: Appl Phys 8(8):922–933

    Article  Google Scholar 

  13. Terasaki H, Simpson SW (2005) Modelling of the GMAW system in free flight and short circuiting transfer. Sci Technol Weld Joining 10(1):120–124

    Article  Google Scholar 

  14. Essers WG, Walter R (1981) Heat transfer and penetration mechanisms with GMA and plasma-GMA welding. Weld J 60(2):37–42

    Google Scholar 

  15. Resende AA, Ferraresi VA, Scotti A, Dutra JC (2011) Influence of welding current in plasma-MIG weld process on the bead weld geometry and wire fusion rate. Weld Int 25(12):910–916

    Article  Google Scholar 

  16. Chen SJ, Jiang F, Zhang JL, Huang N, Zhang YM (2013) Principle of weld formation in variable polarity keyhole plasma arc transverse welding of aluminum alloy. Trans China Weld Inst 34(4):1–6

    Google Scholar 

  17. Zhang QL, Fan CL, Lin SB, Yang CL (2014) Novel soft variable polarity plasma arc and its influence on keyhole in horizontal welding of aluminium alloys. Sci Technol Weld Joining 19(6):493–499

    Article  Google Scholar 

  18. Woodward NJ, Richardson IM, Thomas A (2000) Variable polarity plasma arc welding of 6.35 mm aluminium alloys: parameter development and preliminary analysis. Sci Technol Weld Joining 5(1):21–25

    Article  Google Scholar 

  19. Han YQ, Zhao P, Du MH, Yao QH (2012) Numerical simulation of aluminum alloys variable polarity plasma arc welding temperature field. Chin J Mech Eng 48(24):33–37

    Article  Google Scholar 

  20. Han YQ, Hong HT, Guo L, Yao QH (2013) Vertical welding of aluminum alloy during variable polarity plasma arc welding process with AC-DC mixing output current. Trans China Weld Inst 34(9):59–62

    Google Scholar 

  21. Zhang W, Hua XM, Liao W, Li F, Wang M (2014) Behavior of the plasma characteristic and droplet transfer in CO2 laser-GMAW-P hybrid welding. Int J Adv Manuf Technol 72(5–8):935–942

    Article  Google Scholar 

  22. Scotti A, Rodrigues CEAL (2009) Determination of momentum as a mean of quantifying the mechanical energy delivered by droplets during MIG/MAG welding. Eur Phys J Appl Phys 45(1):1–8

    Article  Google Scholar 

  23. Waszink JH, Piena MJ (1986) Experimental investigation of drop detachment and drop velocity in GMAW. Weld J 65(11):289–298

    Google Scholar 

  24. Reis RP, Souza D, Scotti A (2011) Models to describe plasma jet, arc trajectory and arc blow formation in arc welding. Weld World 55(3–4):24–32

    Article  Google Scholar 

  25. Lancaster JF (1986) The physics of welding. Pergamon Press, Oxford

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Key Laboratory of Material Forming, Inner Mongolia University of Technology, Hohhot, 010051, China

    Haitao Hong, Yongquan Han, Maohua Du & Jiahui Tong

Authors
  1. Haitao Hong
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yongquan Han
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Maohua Du
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jiahui Tong
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yongquan Han.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hong, H., Han, Y., Du, M. et al. Investigation on droplet momentum in VPPA-GMAW hybrid welding of aluminum alloys. Int J Adv Manuf Technol 86, 2301–2308 (2016). https://doi.org/10.1007/s00170-016-8381-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-016-8381-2

Keywords

Search

Navigation