Abstract
This article discusses mainly about topology optimization design methods for airborne conformal antenna structure. The basic contents of topology optimization are introduced and the optimization simulation model is established. The topology optimization of the antenna structure is carried out with the given mass percentage as the constraint and the goal of maximizing the fundamental frequency. The optimization results obtained by using solid element and shell element are compared. With that, taking the given fundamental frequency and maximum fatigue stress as constraints, the preliminary optimized structure size of the antenna is further optimized. Comparison with the original antenna structure, it is shown that the optimization design of structure can satisfy the stiffness requirements by increasing the fundamental frequency of overall structure with the lightweight design.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Li, R., Niu, Z., Lin, R.: A novel method for the RCS reduction of conformal microstrip antenna. In: Proceedings of 2011 Cross Strait Quad-Regional Radio Science and Wireless Technology Conference, pp. 516–519. IEEE (2011)
Jie, Y., Zhi-Hui, L.: Analysis of application of AEW radar with conformal array. Mod. Radar. 31(7), 8–11 (2009)
Kim, J., Jang, J.-Y.: Structural design and development of multiband aero-vehicle smart skin antenna. J. Intell. Mater. Syst. Struct. 25(5), 631–639 (2014)
Kim, T.S., Kim, J.E., Kim, Y.Y.: Parallelized structural topology optimization for eigenvalue problems. Int. J. Solids Struct. 41(9–10), 2623–2641 (2004)
Jensen, J.S.: Topology optimization of dynamics problems with Padé approximants. Int. J. Numer. Meth. Eng. 72(13), 1605–1630 (2007)
Svanberg, K., Werme, M.: Sequential integer programming methods for stress constrained topology optimization. Struct. Multidiscip. Optim. 34(7), 277–299 (2007)
Deaton, J.D., Grandhi, R.V.: A survey of structural and multidisciplinary continuum topology optimization: post 2000. Struct. Multidiscip. Optim. 49(1), 1–38 (2014)
Chicago Lambert, L.: An efficient simulated annealing algorithm for design optimization of truss structures. Comput. Struct. 86(19), 1936–1953 (2008)
Vicente, W.M., et al.: Concurrent topology optimization for minimizing frequency responses of two-level hierarchical structures. Comput. Methods Appl. Mech. Eng. 301(12), 116–136 (2016)
Yoon, G.H.: Maximizing the fundamental eigenfrequency of geometrically nonlinear structures by topology optimization based on element connectivity parameterization. Comput. Struct. 88(2), 120–133 (2010)
Jensen, J.S., Pedersen, N.L.: On maximal eigenfrequency separation in two-material structures: the 1D and 2D scalar cases. J. Sound Vib. 289(4–5) (2006)
Stolpe, M., Svanberg, K.: An alternative interpolation scheme for minimum compliance topology optimization. Struct. Multidiscip. Optim. 22(2), 116–124 (2001). https://doi.org/10.1007/s001580100129
Jansen, M., Lombaert, G., Schevenels, M., Sigmund, O.: Topology optimization of fail-safe structures using a simplified local damage model. Struct. Multidiscip. Optim. 49(4), 657–666 (2013). https://doi.org/10.1007/s00158-013-1001-y
Verbart, A., Langelaar, M., Keulen, F.V.: A unified aggregation and relaxation approach for stress-constrained topology optimization. Struct. Multidiscip. Optim. 55(2), 663–679 (2016). https://doi.org/10.1007/s00158-016-1524-0
Tcherniak, D.: Topology optimization of resonating structures using SIMP method. Int. J. Numer. Meth. Eng. 54(11), 1605–1622 (2002)
Le, C., Norato, J., Bruns, T., et al.: Stress-based topology optimization for continua. Struct. Multidiscip. Optim. 41(4), 605–620 (2010)
Jeong, S.H., Park, S.H., Choi, D.H., et al.: Topology optimization considering static failure theories for ductile and brittle materials. Comput. Struct. 110, 116–132 (2012)
Xu, B., Han, Y., Zhao, L.: Bi-directional evolutionary topology optimization of geometrically nonlinear continuum structures with stress constraints. Appl. Math. Model. 80(4), 771–791 (2020)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Science Press
About this paper
Cite this paper
Zhou, X. (2022). Topology Optimization Design of Airborne Conformal Antenna Structure. In: Duan, B., Umeda, K., Kim, Cw. (eds) Proceedings of the Eighth Asia International Symposium on Mechatronics. Lecture Notes in Electrical Engineering, vol 885. Springer, Singapore. https://doi.org/10.1007/978-981-19-1309-9_42
Download citation
DOI: https://doi.org/10.1007/978-981-19-1309-9_42
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-1308-2
Online ISBN: 978-981-19-1309-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)