Skip to main content
SpringerLink
Log in

Influence of the Nanostructure Parameters of Wear-Resistant Coatings on the Properties of Carbide Tools

  • Conference paper
  • First Online:
Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering (GCMM 2021)

Part of the book series: Lecture Notes in Networks and Systems ((LNNS,volume 335))

Included in the following conference series:

  • 877 Accesses

Abstract

The article deals with the properties of the Ti-TiN-(Ti,Cr,Al)N multilayer composite coatings with a nanolayer structure of their wear-resistant layers and the nanolayer period λ within a range from 10 to 900 nm. The studies were focused on the coating nanostructures and the influence of the nanolayer period λ on the performance properties of coated cutting tools during the turning of American Iron and Steel Institute (AISI) 420 (230 HB) martensitic stainless steel. The investigation found that the coatings with the nanolayer period λ = 10–25 nm demonstrated the best resistance to the crater formation on the rake face of cutting tools and to flank wear. The highest wear resistance was demonstrated by a coated tool with the nanolayer period λ = 10 nm.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 149.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 199.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Kalss, W., Reiter, A., Derflinger, V., Gey, C., Endrino, J.L.: Modern coatings in high performance cutting applications. Int. J. Refract. Hard. Met. 24(5), 399–404 (2006)

    Article  Google Scholar 

  2. Bobzin, K.: High-performance coatings for cutting tools. CIRP J. Manuf. Sci. Technol. 18, 1–9 (2017)

    Article  Google Scholar 

  3. Vereschaka, A.S.: Working Capacity of the Cutting Tool with Wear Resistant Coatings. Mashinostroenie, Moscow (1993)

    Google Scholar 

  4. Bouzakis, K.D., Michailidis, N., Skordaris, G., Bouzakis, E., Biermann, D., M’Saoubi, R.: Cutting with coated tools: coating technologies, characterization methods and performance optimization. CIRP Ann. Manuf. Technol. 61, 703–723 (2012)

    Article  Google Scholar 

  5. Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C., Mitterer, C.: Advanced characterization methods for wear resistant hard coatings: a review on recent progress. Surf. Coat. Technol. 285, 31–46 (2016)

    Article  Google Scholar 

  6. Vereschaka, A., et al.: Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools. Surf. Coat. Technol. 385, 125402 (2020)

    Google Scholar 

  7. Grigoriev, S., et al.: Investigation of multicomponent nanolayer coatings based on nitrides of Cr, Mo, Zr, Nb, and Al. Surf. Coat. Technol. 401, 126258 (2020)

    Google Scholar 

  8. Vereschaka, A.A., Grigoriev, S.N., Sitnikov, N.N., Oganyan, G.V., Batako, A.: Working efficiency of cutting tools with multilayer nano-structured Ti-TiCN-(Ti, Al)CN and Ti-TiCN-(Ti, Al, Cr)CN coatings: analysis of cutting properties, wear mechanism and diffusion processes. Surf. Coat. Technol. 332, 198–213 (2017)

    Article  Google Scholar 

  9. Vereschaka, A., et al.: Investigation of wear dynamics for cutting tools with multilayer composite nanostructured coatings in turning constructional steel. Wear 420–421, 17–37 (2019)

    Article  Google Scholar 

  10. Baker, M.A., Klose, S., Rebholz, C., Leyland, A., Matthews, A.: Evaluating the microstructure and performance of nanocomposite PVD TiAlBN coatings. Surf. Coat. Technol. 151–152, 338–343 (2002)

    Article  Google Scholar 

  11. Singh, J., Wolfe, D.E.: Nanostructured component fabrication by electron beam-physical vapor deposition. J. Mater. Eng. Perform. 14(4), 448–459 (2005)

    Article  Google Scholar 

  12. Kuzin, V., Grigor’ev, S., Volosova, M.: Effect of a TiC coating on the stress-strain state of a plate of a high-density nitride ceramic under nonsteady thermoelastic conditions, Refract. Ind. Ceram. 54, 376–380 (2014)

    Google Scholar 

  13. Skordaris, G., et al.: Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts. CIRP Ann. Manuf. Technol. 63, 93–96 (2014)

    Article  Google Scholar 

  14. Zhang, S., Sun, D., Yongqing, F., Hejun, D.: Recent advances of superhard nanocomposite coatings: a review. Surf. Coat. Technol. 167, 113–119 (2003)

    Article  Google Scholar 

  15. Leyland, A., Matthews, A.: On the significance of the H/E ratio in wear control: a nano-composite coating approach to optimized tribological behavior. Wear 246, 1–11 (2000)

    Article  Google Scholar 

  16. Alexey, V.: Development of assisted filtered cathodic vacuum arc deposition of nano-dispersed multi-layered composite coatings on cutting tools. Key Eng. Mater. 581, 62–67 (2014)

    Google Scholar 

  17. Vereschaka, A.A., et al.: Effect of adhesion and the wear-resistant layer thickness ratio on mechanical and performance properties of ZrN-(Zr, Al, Si)N coatings. Surf. Coat. Technol. 357, 218–234 (2019)

    Article  Google Scholar 

  18. Vereschaka, A., et al.: Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life. Tribol. Int. 128, 313–327 (2018)

    Article  Google Scholar 

  19. Vereschaka, A., Tabakov, V., Grigoriev, S., Sitnikov, N., Andreev, N., Milovich, F.: Investigation of wear and diffusion processes on rake faces of carbide inserts with Ti-TiN-(Ti, Al, Si)N composite nanostructured coating. Wear 416–417, 72–80 (2018)

    Article  Google Scholar 

  20. Hovsepian, P., et al.: TiAlN based nanoscale multilayer coatings designed to adapt their tribological properties at elevated temperatures. Thin Solid Films 485, 160–168 (2005)

    Article  Google Scholar 

  21. Antonov, M., Hussainova, I., Sergejev, F., Kulu, P., Gregor, A.: Assessment of gradient and nanogradient PVD coatings behavior under erosive, abrasive and impact wear conditions. Wear 267(5–8), 898–906 (2009)

    Article  Google Scholar 

  22. Vereschaka, A.A., et al.: Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools. Int. J. Adv. Manuf. Technol. 90(1–-4), 27–43 (2017)

    Article  Google Scholar 

  23. Contreras, E., Galindez, Y., Rodas, M.A., Bejarano, G., Gómez, M.A.: CrVN/TiN nanoscale multilayer coatings deposited by DC unbalanced magnetron sputtering. Surf. Coat. Technol. 332, 214–222 (2017)

    Article  Google Scholar 

  24. Bobzin, K., Brögelmann, T., Kruppe, N.C., Arghavani, M., Mayer, J., Weirich, T.E.: Plastic deformation behavior of nanostructured CrN/AlN multilayer coatings deposited by hybrid dcMS/HPPMS. Surf. Coat. Technol. 332, 253–261 (2017)

    Article  Google Scholar 

  25. Hovsepian, P., Ehiasarian, A.P., Deeming, A., Schimpf, C.: Novel TiAlCN/VCN nanoscale multilayer PVD coatings deposited by the combined high-power impulse magnetron sputtering/unbalanced magnetron sputtering (HIPIMS/UBM) technology. Vacuum 82, 1312–1317 (2008)

    Article  Google Scholar 

  26. Zhang, Z.G., et al.: Microstructures and tribological properties of CrN/ZrN nanoscale multilayer coatings. Appl. Surf. Sci. 255, 4020–4026 (2009)

    Article  Google Scholar 

  27. Araujo, J.A., Araujo, G.M., Souza, R.M., Tschiptschin, A.P.: Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique. Wear 330–331, 469–477 (2015)

    Article  Google Scholar 

  28. Araujo, J.A., Giorjão, R.A.R., Bettini, J., Souza, R.M., Tschiptschin, A.P.: Modeling intrinsic residual stresses built-up during growth of nanostructured multilayer NbN/CrN coatings. Surf. Coat. Technol. 308, 264–272 (2016)

    Article  Google Scholar 

  29. Kamath, G., Ehiasarian, A.P., Purandare, Y., Hovsepian, P.: Tribological and oxidation behaviour of TiAlCN/VCN nanoscale multilayer coating deposited by the combined HIPIMS/(HIPIMS-UBM) technique. Surf. Coat. Technol. 205, 2823–2829 (2011)

    Article  Google Scholar 

  30. Hovsepian, P., Ehiasarian, A.P., Braun, R., Walker, J., Du, H.: Novel CrAlYN/CrN nanoscale multilayer PVD coatings produced by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique for environmental protection of γ-TiAl alloys. Surf. Coat. Technol. 204, 2702–2708 (2010)

    Article  Google Scholar 

  31. AL-Bukhaiti, M.A., Al-Hatab, K.A., Tillmann, W., Hoffmann, F., Sprute T.: Tribological and mechanical properties of Ti/TiAlN/TiAlCN nanoscalemultilayer PVD coatings deposited on AISI H11 hot work tool steel. Appl. Surf. Sci. 318, 180–190 (2014)

    Google Scholar 

  32. Yanga, Y., Yeob, I., Parkc, S., Oh, Y.: Microstructure and phase forming behavior of chrome based multi-composition nitride coatings with nanolayer structures. Ceram. Int. 40, 11567–11573 (2014)

    Article  Google Scholar 

  33. Wang, M., Toihara, T., Sakurai, M., Kurosaka, W., Miyake, S.: Surface morphology and tribological properties of DC sputtered nanoscale multilayered TiAlN/CNx coatings. Tribol. Int. 73, 36–46 (2014)

    Article  Google Scholar 

  34. Vereshchaka, A.A., Vereshchaka, A.S., Mgaloblishvili, O., Morgan, M.N., Batako, A.D.: Nano-scale multilayered-composite coatings for the cutting tools. Int. J. Adv. Manuf. Technol. 72(1–4), 303–317 (2014)

    Article  Google Scholar 

  35. Fominski, V.Yu., Grigoriev, S.N., Celis, J.P., Romanov, R.I., Oshurko, V.B.: Structure and mechanical properties of W–Se–C/diamond-like carbon and W–Se/diamond-like carbon bi-layer coatings prepared by pulsed laser deposition. Thin Solid Films 520(21), 6476–6483 (2012)

    Google Scholar 

  36. Fominski, V.Yu., Grigoriev, S.N., Gnedovets, A.G., Romanov, R.I.: Pulsed laser deposition of composite Mo-Se-Ni-C coatings using standard and shadow mask configuration. Surf. Coat. Technol. 206(24), 5046–5054 (2012)

    Google Scholar 

  37. Metel, A.S., Grigoriev, S.N., Melnik, Y.A., Prudnikov, V.V.: Glow discharge with electrostatic confinement of electrons in a chamber bombarded by fast electrons. Plasma Phys Rep. 37, 628–637 (2011)

    Article  Google Scholar 

  38. Grigoriev, S.N., Melnik, Y.A., Metel, A.S., Panin, V.V., Prudnikov, V.V.: Broad beam source of fast atoms produced as a result of charge exchange collisions of ions accelerated between two plasmas. Instrum. Exp. Tech. 52, 602–608 (2009)

    Article  Google Scholar 

  39. Grigoriev, S., Melnik, Y., Metel, A.: Broad fast neutral molecule beam sources for industrial-scale beam-assisted deposition. Surf. Coat. Technol. 156(1–3), 44–49 (2002)

    Article  Google Scholar 

  40. Grigoriev, S.N., Melnik, Y.A., Metel, A.S., Panin, V.V.: A compact vapor source of conductive target material sputtered by 3-keV Ions at 0.05-Pa pressure. Instrum. Exp. Tech. 52, 731–737 (2009)

    Google Scholar 

  41. Metel, A.S., Grigoriev, S.N., Melnik, Y.A., Bolbukov, V.P.: Broad beam sources of fast molecules with segmented cold cathodes and emissive grids. Instrum. Exp. Tech. 55, 122–130 (2012)

    Article  Google Scholar 

  42. Grigoriev, S.N., Metel’, A.S., Fedorov, S.V.: Modification of the structure and properties of high-speed steel by combined vacuum-plasma treatment. Met. Sci. Heat Treat. 54(1–2), 8–12 (2012)

    Article  Google Scholar 

  43. Grigoriev, S., Metel, A.: Plasma- and beam- assisted deposition methods. Nato Sci. Ser. II Math. Phys. Chem. 155, 147–154 (2004)

    Article  Google Scholar 

  44. Vereschaka, A.A., Grigoriev, S.N., Vereschaka, A.S., Popov, A.Y., Batako, A.D.: Nano-scale multilayered composite coatings for cutting tools operating under heavy cutting conditions. Procedia CIRP 14, 239–244 (2014)

    Article  Google Scholar 

  45. Oliver, W.C., Pharr, G.M.J.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation. J. Mater. Res. 7, 1564–1583 (1992)

    Article  Google Scholar 

  46. Chen, L., Du, Y., Wang, A.J., Wang, S.Q., Zhou, S.Z.: Effect of Al content on microstructure and mechanical properties of Ti-Al-Si-N nanocomposite coatings. Int. J. Refract. Hard. Met. 27(4), 718–721 (2009)

    Article  Google Scholar 

Download references

Acknowledgments

The study was supported by a grant from the Russian Science Foundation (project No. 21-19-00612). The study used the equipment from the Centre for collective use of Moscow State Technological University STANKIN (agreement No. 075-15-2021-695, 26/07/2021). The coating structure was investigated using the equipment of the Centre for collective use of scientific equipment “Material Science and Metallurgy”, purchased with the financial support of the Ministry of Science and Higher Education of the Russian Federation (GK 075-15-2021-696).

Author information

Authors and Affiliations

  1. Moscow State Technological University STANKIN, Vadkovsky per. 1, Moscow, 127994, Russia

    Alexey Vereschaka, Marina Volosova & Catherine Sotova

  2. ICTI RAS, Vadkovsky per. 18-1A, Moscow, 127055, Russia

    Alexey Vereschaka & Jury Bublikov

  3. National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Kashirskoeshosse 31, Moscow, 115409, Russia

    Nikolay Sitnikov

  4. National University of Science and Technology “MISIS”, Leninsky prospect 4, Moscow, 119049, Russia

    Filipp Milovich & Nikolay Andreev

Authors
  1. Alexey Vereschaka
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Marina Volosova
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Nikolay Sitnikov
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Filipp Milovich
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Nikolay Andreev
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Jury Bublikov
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Catherine Sotova
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Alexey Vereschaka .

Editor information

Editors and Affiliations

  1. Liverpool John Moores University, Liverpool, UK

    Andre Batako

  2. Wroclaw University of Science and Technology, Wrocław, Poland

    Anna Burduk

  3. School of Civil Engineering and Built Environment, Liverpool John Moores University, Liverpool, UK

    Kanisius Karyono

  4. General Engineering Research Institute, Liverpool John Moores University, Liverpool, UK

    Xun Chen

  5. Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

    Ryszard Wyczółkowski

Rights and permissions

Reprints and permissions

Copyright information

© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Vereschaka, A. et al. (2022). Influence of the Nanostructure Parameters of Wear-Resistant Coatings on the Properties of Carbide Tools. In: Batako, A., Burduk, A., Karyono, K., Chen, X., Wyczółkowski, R. (eds) Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering. GCMM 2021. Lecture Notes in Networks and Systems, vol 335. Springer, Cham. https://doi.org/10.1007/978-3-030-90532-3_11

Download citation

Publish with us

Policies and ethics

Search

Navigation