Abstract
Wind power is a fast growing source of renewable energy. In this chapter, the process of conversion of the kinetic energy inherent in the wind to electrical energy is described. Numerous technologies exist and compete in order to achieve this objective, but in general, wind turbines and wind power plants (WPPs) rely on electrical machinery and power converters working together to achieve this purpose in an optimal and stable fashion. In this chapter, prevailing generator and converter types are discussed, as are some designs which may be seen in future turbines. Turbine and plant level control is also discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
World Wind Energy Association (WWEA) Website (2010) http://www.wwindea.org/home/index.php
Lindenberg S, Smith B, O’Dell K, DeMeo E (2008) 20 % wind energy by 2030: increasing wind energy’s contribution to U.S. electricity supply. U.S. Department of Energy. http://www.nrel.gov/docs/fy08osti/41869.pdf
Heier S (1998) Grid integration of wind energy conversion systems. Wiley, New York
Hansen L, Madsen P, Blaabjerg F et al (2001) Generators and power electronics technology for wind turbines. The 27th annual conference of the IEEE industrial electronics society (IECON)
Baroudi J, Dinavahi V, Knight A (2005) A review of power converter topologies for wind generators. In: IEEE international conference on electric machines and drives
Muljadi E, Ellis A (2008) Validation of wind power plant models. In: IEEE power and energy society general meeting-conversion and delivery of electrical energy in the 21st century, pp 1–7
Behnke M, Ellis A, Kazachkov Y et al (2007) Development and validation of WECC variable speed wind turbine dynamic models for grid integration studies. AWEA WindPower conference
Hansen L, Helle L, Blaabjerg F et al (2001) Conceptual survey of generators and power electronics for wind turbines. Risø National Laboratory. www.risoe.dk/rispubl/VEA/ris-r-1205.htm
Muljadi E, Butterfield CP, Ellis A et al (2006) Equivalencing the collector system of a large wind power plant. In: IEEE power engineering society general meeting
Ackermann T (2005) Wind power in power systems. Wiley, New York
Tsili M, Papathanassiou S (2009) A review of grid code technical requirements for wind farms. IET Renew Power Gener 3:308
Jauch C, Matevosyan J, Ackermann T et al (2005) International comparison of requirements for connection of wind turbines to power systems. Wind Energy 8:295
González-Rodriguez AG (2006) Improvement of a fixed-speed wind turbine soft-starter based on a sliding-mode controller (PhD Thesis). Department of Electrical Engineering, University of Seville
Novak P, Ekelund T, Jovilk I et al (1995) Modeling and control of variable speed wind turbine drive systems dynamics. IEEE Control Syst Mag 15(4):28–38
Slootweg JG, Polinder H, Kling WL (2001) Dynamic modeling of a wind turbine with doubly fed induction generator. In: Proc IEEE Power Eng Soc Summer Meeting
Muller S, Deicke M, de Doncker RW (2002) Doubly fed induction generator systems for wind turbines. Ind Appl Mag 8(3):26–33
Pena R, Clare JC, Asher GM (1996) Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation. Proc Inst Elect Eng (Electr Power Appl) 143(3):231–241
Morren J, De Hann S (2007) Short-circuit current of wind turbines with doubly fed induction generator. IEEE Trans Energy Convers 22:174–180
Carrasco J, Franquelo L, Bialasiewicz J et al (2006) Power-electronic systems for the grid integration of renewable energy sources: a survey. IEEE Trans Ind Electron 53:1002
Burnham D, Santoso S, Muljadi E (2009) Variable rotor-resistance control of wind turbine generators. In: IEEE power and energy society general meeting
Krause P, Wasynczuk O, Sudhoff S (2002) Analysis of electric machinery and drive systems. IEEE Press, NJ
Singh M, Vyas M, Santoso S (2010) Using generic wind turbine models to compare inertial response of wind turbine technologies. In: IEEE power and energy society general meeting
Hansen D, Sorensen P, Iov F et al (2006) Centralised power control of wind farm with doubly fed induction generators. Renew Energy 31:935
Rodriguez-Amenedo JL, Arnalte S, Burgos JC (2002) Automatic generation control of a wind farm with variable speed wind turbines. IEEE Trans Energy Convers 17(2):279–284
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag London
About this chapter
Cite this chapter
Singh, M., Muljadi, E., Gevorgian, V., Santoso, S. (2013). Wind Power Generation. In: Chakraborty, S., Simões, M., Kramer, W. (eds) Power Electronics for Renewable and Distributed Energy Systems. Green Energy and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-5104-3_4
Download citation
DOI: https://doi.org/10.1007/978-1-4471-5104-3_4
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-5103-6
Online ISBN: 978-1-4471-5104-3
eBook Packages: EnergyEnergy (R0)