Abstract
The investigations on the morphological features of epoxy/rubber blends are of great importance as the morphology controls the property and performance of these blends. The characterization techniques like optical microscopy (OM), scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM) are commonly used to evaluate the morphology and phase distribution of the dispersed rubber particles in the epoxy matrix. These characterization techniques are used to explore the morphological features in epoxy systems modified with different kinds of rubbers such as liquid rubbers, preformed core–shell rubber particles, in situ-formed rubber particles, etc. Moreover, several factors which affect the final two-phase morphology in the epoxy/rubber blends are also explored using these techniques. The fracture surface characteristics are also explored using morphological investigation of the fracture/fatigue surface of the epoxy/rubber blends to establish the toughening mechanism operating in them. While both OM and SEM are widely used to reveal the microstructure, AFM and TEM are used to trace out the nanostructure in such blends. The current chapter gives a detailed discussion on the use of such techniques to explore the morphology and the microscopic toughening phenomena operates in epoxy/rubber blends on the basis of published reports.
Similar content being viewed by others
References
Azimi HR, Pearson RA, Hertzberg RW (1996) Fatigue of rubber-modified epoxies: effect of particle size and volume fraction. J Mater Sci 31:3777–3789
Bagheri R, Pearson RA (1995) Interfacial studies in CTBN-modified epoxies. J Appl Polym Sci 58:427–437
Bagheri R, Pearson RA (2000) Role of particle cavitation in rubber-toughened epoxies: II. Inter-particle distance. Polymer 41:269–276
Bagheri R, Marouf BT, Pearson RA (2009) Rubber-toughened epoxies: a critical review. Polym Rev 49:201–225
Balakrishnan S, Start PR, Raghavan D, Hudson SD (2005) The influence of clay and elastomer concentration on the morphology and fracture energy of preformed acrylic rubber dispersed clay filled epoxy nanocomposites. Polymer 46:11255–11262
Barcia FL, Amaral TP, Soares BG (2003) Synthesis and properties of epoxy resin modified with epoxy-terminated liquid polybutadiene. Polymer 44:5811–5819
Bartlet P, Pascault JP, Sautereau H (1985) Relationships between structure and mechanical properties of rubber-modified epoxy networks cure with dicyanodiamide hardener. J Appl Polym Sci 30:2955–2966
Bascom WD, Cottington RL, Jones RL, Peyser P (1975) The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesives. J Appl Polym Sci 19:2545–2562
Bascom WD, Ting RY, Moulton RJ, Riew CK, Siebert AR (1981) The fracture of an epoxy polymer containing elastomeric modifiers. J Mater Sci 16:2657–2664
Chen EK, Jan YH (1991) Toughening mechanism for a rubber-toughened epoxy resin with rubber/matrix interfacial modification. J Mater Sci 26:5848–5858
Chen TK, Jan YH (1995) Effect of matrix ductility on the fracture behavior of rubber toughened epoxy resins. Polym Eng Sci 35:778–785
Chen D, Pascault JP, Sautereau H (1994) Rubber-modified epoxies: IV. Role of chain ends on the morphologies and properties. Polym Int 33:263–271
Chen J, Kinloch AJ, Sprenger S, Taylor AC (2013) The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles. Polymer 54:4276–4289
Guan L-Z, Gong L-X, Tang L-C, Wu L-B, Jiang J-X, Lai G-Q (2014) Mechanical properties and fracture behaviors of epoxy composites with phase-separation formed liquid rubber and preformed powered rubber nanoparticles: a comparative study. Polym Compos. doi:10.1002/pc.22995
He J, Raghavan D, Hoffman D, Hunston D (1999) The influence of elastomer concentration on toughness in dispersions containing preformed acrylic elastomeric particles in an epoxy matrix. Polymer 40:1923–1933
Heng Z, Chen Y, Zou H, Liang M (2015) Simultaneously enhanced tensile strength and fracture toughness of epoxy resins by a poly(ethylene oxide)-block-carboxyl terminated butadiene-acrylonitrile rubber dilock copolymer. RSC Adv 5:42362–42368
Huang Y, Kinloch AJ (1992) The role of plastic void growth in the fracture of rubber-toughened epoxy polymers. J Mater Sci Lett 11:484–487
Kim DS, Kim SC (1994) Rubber modified epoxy resin. II: phase separation behavior. Polym Eng Sci 34:1598–1604
Kinloch AJ, Shaw SJ, Tod DA, Hunston DL (1983a) Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies. Polymer 24:1341–1354
Kinloch AJ, Shaw SJ, Hunston DL (1983b) Deformation and fracture behaviour of a rubber-toughened epoxy: 2. Failure criteria. Polymer 24:1355–1363
Kinloch AJ, Lee SH, Taylor AC (2014) Improving the fracture toughness and the cyclic-fatigue resistance of epoxy-polymer blends. Polymer 55:6325–6334
Konnola R, Parameswaranpillai J, Joseph K (2015) Mechanical, thermal, and viscoelastic response of novel in situ CTBN/POSS/epoxy hybrid composite system. Polym Compos. doi:10.1002/pc
Kunz SC, Sayre JA, Assink RA (1982) Morphology and toughness characterization of epoxy resins modified with amine and carboxyl terminated rubbers. Polymer 23:1897–1906
Lee HS, Kyu T (1990) Phase separation dynamics of rubber/epoxy mixtures. Macromolecules 23:459–464
Liang YL, Pearson RA (2010) The toughening mechanism in Hybrid Epoxy-Silica-Rubber Nanocomposites (HESRNs). Polymer 51:4880–4890
Liu W, Hoa SV, Pugh M (2004) Morphology and performance of epoxy nanocomposites modified with organoclay and rubber. Polym Eng Sci 44:1178–1186
Ma J, Mo M-S, Du X-S, Dai S-R, Luck I (2008) Study of epoxy toughened by in situ formed rubber nanoparticles. J Appl Polym Sci 110:304–312
Manzione LT, Gillham JK, Mcpherson CA (1981a) Rubber-modified epoxies. I. Transitions and morphology. J Appl Polym Sci 26:889–905
Manzione LT, Gillham JK, McPherson CA (1981b) Rubber-modified epoxies. II. Morphology and mechanical properties. J Appl Polym Sci 26:907–919
Mathew VS, George SC, Parameswaranpillai J, Thomas S (2014) Epoxidized natural rubber/epoxy blends: phase morphology and thermomechanical properties. J Appl Polym Sci 131:39906
Minfeng Z, Xudong S, Huiquan X, Genzhong J, Xuewen J, Baoyi W, Chenze Q (2008) Investigation of free volume and the interfacial, and toughening behavior for epoxy resin/rubber composites by positron annihilation. Radiat Phys Chem 77:245–251
Naè HN (1986) Phase separation in rubber-modified thermoset resins: optical microscopy and laser light scattering. J Appl Polym Sci 31:15–25
Nigam V, Setua DK, Mathur GN (2003) Failure analysis of rubber toughened epoxy resin. J Appl Polym Sci 87:861–868
Pearson RA, Yee AF (1986) Toughening mechanisms in elastomer-modified epoxies part 2 microscopy studies. J Mater Sci 21:2475–2488
Pearson RA, Yee AF (1991) Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies. J Mater Sci 26:3828–3844
Quan D, Ivankovic A (2015) Effect of Core Shell Rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer. Polymer 66:16–28
Ratna D, Banthia AK (2000) Toughened epoxy adhesive modified with acrylate based liquid rubber. Polym Int 49:281–287
Ratna D, Banthia AK (2007) Reactive acrylic liquid rubber with terminal and pendant carboxyl groups as a modifier for epoxy resin. Polym Eng Sci 47:26–33
Ratna D, Simon GP (2010) Epoxy and hyperbranched polymer blends: morphology and free volume. J Appl Polym Sci 117:557–564
Russell B, Chartoff R (2005) The influence of cure conditions on the morphology and phase distribution in a rubber-modified epoxy resin using scanning electron microscopy and atomic force microscopy. Polymer 46:785–798
Shaffer OL, Bagheri R, Qian JY, Dimonie V, Pearson RA, El-aasser MS (1995) Characterization of the particle-matrix interface in rubber-modified epoxy by atomic force microscopy. J Appl Polym Sci 58:465–484
Soares BG, Leyva ME, Moreira VX, Barcia FL, Khastgir D, SimĂ£o RA (2004) Morphology and dielectric properties of an epoxy network modified by end-functionalized liquid polybutadiene. J Polym Sci B Polym Phys 42:4053–4062
Soares BG, Dahmouche K, Lima VD, Silva AA, Caplan SPC, Barcia FL (2011) Characterization of nanostructured epoxy networks modified with isocyanate-terminated liquid polybutadiene. J Colloid Interface Sci 358:338–346
Sultan JN, McGarry FJ (1973) Effect of rubber particle size on deformation mechanisms in glassy epoxy. Polym Eng Sci 13:29–34
Tang L-C, Wang X, Wan Y-J, Wu L-B, Jiang J-X, Lai G-Q (2013) Mechanical properties and fracture behaviors of epoxy composites with multi-scale rubber particles. Mater Chem Phys 141:333–342
Thomas R, Abraham J, Thomas PS, Thomas S (2004) Influence of carboxyl-terminated (butadiene-co-acrylonitrile)loading on the mechanical and thermal properties of cured epoxy blends. J Polym Sci B Polym Phys 42:2531–2544
Thomas R, Ronkay F, Czigany T, Cvelbac U, Mozetic M, Thomas S (2011) A probe on the failure mechanism in rubber-modified epoxy blends: morphological and acoustic emission analysis. J Adhes Sci Technol 25:1747–1765
Tripathi G, Srivastava D (2007) Effect of carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-a (DGEBA) epoxy resin. Mater Sci Eng A 443:262–269
Verchere D, Pascault JP, Sautereau H, Moschiar SM, Riccardi CC, Williams RJJ (1991a) Rubber-modified epoxies. IV. Influence of morphology on mechanical properties. J Appl Polym Sci 43:293–304
Verchere D, Pascault JP, Sautereau H, Moschiar SM, Riccardi CC, Williams RJJ (1991b) Rubber-modified epoxies. II. Influence of the cure schedule and rubber concentration on the generated morphology. J Appl Polym Sci 42:701–716
Vijayan PP, Puglia D, Jyotishkumar P, Kenny JM, Thomas S (2012) Effect of nanoclay and carboxyl-terminated (butadiene-co-acrylonitrile) (CTBN) rubber on the reaction induced phase separation and cure kinetics of an epoxy/cyclic anhydride system. J Mater Sci 47:5241–5253
Vijayan PP, Puglia D, Kenny JM, Thomas S (2013) Effect of organically modified nanoclay on the miscibility, rheology, morphology and physical properties of epoxy/carboxyl-terminated (butadiene-co-acrylonitrile) blend. Soft Matter 9:2899–2911
Wise CW, Cook WD, Goodwin AA (2000) CTBN rubber phase precipitation in model epoxy resins. Polymer 41:4625–4633
Xiao K, Ye L (2000) Rate-effect on fracture behavior of Core-Shell-Rubber (CSR)-modified epoxies. Polym Eng Sci 40:70–81
Yamanaka K, Inoue T (1990) Phase separation mechanism of rubber-modified epoxy. J Mater Sci 25:241–245
Yamanaka K, Takagi Y, Inoue T (1989) Reaction-induced phase separation in rubber-modified epoxy resins. Polymer 60:1839–1844
Yee AF, Pearson RA (1986) Toughening mechanisms in elastomer-modified epoxies part 1 mechanical studies. J Mater Sci 21:2462–2474
Yee AF, Li D, Li X (1993) The importance of constraint relief caused by rubber cavitation in the toughening of epoxy. J Mater Sci 28:6392–6398
Yu S, Hu H, Ma J, Yin J (2008) Tribological properties of epoxy/rubber nanocomposites. Tribol Int 41:1205–1211
Zhang J, Zhang H, Yang Y (1999) Polymerization-induced bimodal phase separation in a rubber-modified epoxy system. J Appl Polym Sci 72:59–67
Zhao Y, Chen Z-K, Liu Y, Xiao H-M, Feng Q-P, Fu S-Y (2013) Simultaneously enhanced cryogenic tensile strength and fracture toughness of epoxy resins by carboxylic nitrile-butadiene nano-rubber. Compos Part A 55:178–187
Zhao K, Song X-X, Liang C-S, Wang J, Xu S-A (2015) Morphology and properties of nanostructured epoxy blends toughened with epoxidized carboxyl-terminated liquid rubber. Iran Polym J 24:425–435
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this entry
Cite this entry
Vijayan, P.P. (2015). Morphology of Epoxy/Rubber Blends. In: Parameswaranpillai, J., Hameed, N., Pionteck, J., Woo, E. (eds) Handbook of Epoxy Blends. Springer, Cham. https://doi.org/10.1007/978-3-319-18158-5_4-1
Download citation
DOI: https://doi.org/10.1007/978-3-319-18158-5_4-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Online ISBN: 978-3-319-18158-5
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics