1. ISPS 2008 editorial: the 18th ASME annual conference on information storage and processing systems, Santa Clara, CA, USA

   • Jen-Yuan (James) Chang

   Editorial 18 September 2009 Pages: 1 - 2

2. Experimental identification of abnormal noise and vibration in a high-speed polygon mirror scanner motor due to mechanical contact of plain journal bearing

   • M. G. Kim
   • G. H. Jang
   • D. O. Lim

   Technical Paper 12 November 2008 Pages: 3 - 8

   

3. Effects of stray magnetic forces on position error signals during a long seeking-and-settling process

   • Tsung-Liang Wu
   • Chaw-Wu Tseng
   • I. Y. Shen

   Technical Paper 14 November 2008 Pages: 9 - 17

   

4. Permanent magnet configuration in design of an eddy current damper

   • Babak Ebrahimi
   • Mir Behrad Khamesee
   • Farid Golnaraghi

   Technical Paper 14 November 2008 Pages: 19 - 24

   

5. Design and implementation of a real-time vision-assisted system for micro-scaled object identification and tracking

   • He Huang
   • Jen-Yuan (James) Chang

   Technical Paper 12 November 2008 Pages: 25 - 32

   

6. Phenomenological nanoindentation technique in quality control of optoelectronics devices

   • Antanas Daugela
   • Norm Gitis
   • Vladimir Gelfeindbein

   Technical Paper 12 November 2008 Pages: 33 - 39

   

7. Experimental and parametric studies of 0.85-in. hard disk drives spindle motor vibration

   • Tsung-Liang Wu
   • I. Y. Shen
   • T. Asada

   Technical Paper 13 January 2009 Pages: 41 - 48

   

8. Effects of environmental temperature and humidity on thermal flying height adjustment

   • Weidong Zhou
   • Bo Liu
   • Chee How Wong

   Technical Paper 13 January 2009 Pages: 49 - 55

   

9. Simulation on contact between the droplet and the slider at head-disk interface based on water-hammer pressure model

   • Jianhua Li
   • Junguo Xu
   • Yuichi Aoki

   Technical Paper 20 December 2008 Pages: 57 - 65

   

10. A predictive technique for evaluating structural vibration gain of damped suspensions in hard disk drives

    • Mark Lowry

    Technical Paper 17 January 2009 Pages: 67 - 71

    

11. A new evaluation method of surface energy of ultra-thin film

    • Hiroshige Matsuoka
    • Katsunori Ono
    • Shigehisa Fukui

    Technical Paper 13 January 2009 Pages: 73 - 76

    

12. Passive acoustic monitoring of head disc interface interactions

    • Antanas Daugela
    • Jason W. Riddering
    • Zine E. Boutaghou

    Technical Paper 07 January 2009 Pages: 77 - 83

    

13. Three-dimensional deformation analyses of the ultra-thin liquid film surface (linearized analyses for the steady state)

    • Shigehisa Fukui
    • Keisuke Hitomi
    • Hiroshige Matsuoka

    Technical Paper 14 January 2009 Pages: 85 - 92

    

14. On Taylor vortices and Ekman layers in flow-induced vibration of hard disk drives

    • Ferdinand Hendriks

    Technical Paper 08 January 2009 Pages: 93 - 101

    

15. Assembly and evaluation of a SIL optical head for cover-layered incident NFR without disk contact with the bottom surface of a SIL

    • Yong-Joong Yoon
    • Cheol-Ki Min
    • Young-Pil Park

    Technical Paper 13 January 2009 Pages: 103 - 109

    

16. Optimal seek profile generation with time-varying weightings for hard disk drives

    • Zhi Wang
    • Jr-Yi Shen
    • Pushkar Hingwe

    Technical Paper 13 January 2009 Pages: 111 - 115

    

17. Precision positioning of a three-axis optical pickup via a double phase-lead compensator equipped with auto-tuned parameters

    • Paul C.-P. Chao
    • Chi-Wei Chiu
    • Jackal C.-Y. Shen

    Technical Paper 31 January 2009 Pages: 117 - 141

    

18. A study of acoustic noise generating mechanisms of small form factor HDDs

    • H. Zheng
    • J. Q. Mou
    • E. H. Ong

    Technical Paper 29 January 2009 Pages: 143 - 148

    

19. Auto-focusing actuator and camera module including flexible diaphragm for mobile phone camera and wireless capsule endoscope

    • Byung Youn Song
    • Do Sun Nam
    • Junghoon Lee

    Technical Paper 30 January 2009 Pages: 149 - 159

    

20. Iteration method for analysis of write-current-induced thermal protrusion

    • Hui Li
    • Masayuki Kurita
    • Shinobu Yoshida

    Technical Paper 29 January 2009 Pages: 161 - 167

    

21. Read-out characteristics of a triangular aperture mounted optical head slider applied to a polarized light: spatial resolution in the circumferential direction

    • Toshifumi Ohkubo
    • Majung Park
    • Kunio Nakajima

    Technical Paper 12 February 2009 Pages: 169 - 177

    

22. Modal contribution analysis of an operating complete flexible HDD affecting the head-disk motion due to shock

    • C. H. Seo
    • K. Y. Park
    • G. H. Jang

    Technical Paper 03 February 2009 Pages: 179 - 185

    

23. Exploration of vibro-acoustic characteristics of HDD spindle motors using electro-magnetic frequency-swept excitation

    • Thitima Jintanawan
    • Apirat Sillapapinij
    • Surapong Suwankawin

    Technical Paper 29 January 2009 Pages: 187 - 194

    

24. Improving the tolerance characteristics of small F/number compact camera module using wavefront coding

    • Sang-Hyuck Lee
    • No-Cheol Park
    • Kyoung-Su Park

    Technical Paper 30 January 2009 Pages: 195 - 203

    

25. Design of the rotary VCM actuator for small form factor optical disk drive

    • Myeong-Gyu Song
    • Jung-Hyun Woo
    • Kyoung-Su Park

    Technical Paper 17 March 2009 Pages: 205 - 212

    

26. Mitigation of flow induced vibration of head gimbal assembly

    • Qi De Zhang
    • Chok Shiong Tan
    • Ning Yu Liu

    Technical Paper 31 March 2009 Pages: 213 - 219

    

27. Mechanism study of scratch-induced demagnetization for perpendicular magnetic disks

    • Masaru Furukawa
    • Junguo Xu
    • Yukio Kato

    Technical Paper 02 April 2009 Pages: 221 - 226

    

28. Auto-detection micro-controller-based autonomous band wrapping system for targeted pest control

    • Todd Lee
    • Scott Hudson
    • Jen-Yuan (James) Chang

    Technical Paper 19 April 2009 Pages: 227 - 231

    

29. Non-contact measurement method of mechanical stiffness for high revolutionary speed precision fluid dynamic bearing rotors

    • Y. S. Ihn
    • S. K. Kim
    • Ja Choon Koo

    Technical Paper 19 April 2009 Pages: 233 - 240

    

30. Precise measurement of angular position and speed of spindle motor during spin-up by computing differences in winding current rise time

    • Jianghong Ding
    • C. W. Ji

    Technical Paper 05 May 2009 Pages: 241 - 247

    

31. Optimization of micro-thermal actuator for flying height control

    • Jin Liu
    • Jianhua Li
    • Shinobu Yoshida

    Technical Paper 29 April 2009 Pages: 249 - 255

    

32. Feasibility study on echo control of a prosthetic knee: sensors and wireless communication

    • Roozbeh Borjian
    • Mir Behrad Khamesee
    • William Melek

    Technical Paper 26 April 2009 Pages: 257 - 265

    

33. Effect of suspension design on the non-operational shock response in a load/unload hard disk drive

    • Hao Zheng
    • Aravind N. Murthy
    • Frank E. Talke

    Technical Paper Open access 07 May 2009 Pages: 267 - 271

    

34. Touch-down and take-off hysteresis of magnetic recording sliders on discrete track media

    • Y. Yoon
    • F. E. Talke

    Technical Paper Open access 26 April 2009 Pages: 273 - 278

    

35. Adaptive hybrid tracking-error control for DVD drives in vehicular systems

    • Min-Chun Pan
    • Chun Chien

    Technical Paper 26 April 2009 Pages: 279 - 286

    

36. Effect of humidity on the interactions between probes and ultra-thin liquid lubricant films in an environmentally controlled atomic force microscope

    • Norio Tagawa
    • Jun-ichi Hatakeyama
    • Atsunobu Mori

    Technical Paper 29 April 2009 Pages: 287 - 292

    

37. Fluorine-ion-implanted air-bearing surface for low-friction head–disk interface

    • Yuki Shimizu
    • Noritsugu Umehara
    • Junguo Xu

    Technical Paper 22 May 2009 Pages: 293 - 299

    

38. Slider surface control for ultra-high density recording

    • Febiana Tjiptoharsono
    • Leonard Verano Gonzaga
    • Bo Liu

    Technical Paper 04 July 2009 Pages: 301 - 307

    

39. Improved gap servo system using a brake pulse for a SIL-based near-field recording system

    • Jung-Gon Kim
    • Min-Seok Kang
    • Kyunggeun Lee

    Technical Paper 17 July 2009 Pages: 309 - 315

    

40. Robust dual-stage and repetitive control designs for an optical pickup with parallel cantilever beams powered by piezo-actuation

    • Paul C.-P. Chao
    • Lun-De Liao
    • Ming-Hsun Chung

    Technical Paper 19 August 2009 Pages: 317 - 331