1. Optimization of conjunctive use of surface and groundwater by using LINGO and PSO in water resources management

   • Ranjeet Sabale
   • Mathew Jose

   Technical paper 03 February 2022 Article: 135

   

2. Verification of pull-out resistance of anchors in soil/rock formations using empirical and finite element methods

   • A. H. Abdel-Rahman
   • M. F. Awad-Allah

   Practice-oriented paper 07 January 2022 Article: 134

   

3. Post-fire evaluation of SHS retrofitted steel columns

   • Hamed Makhdoumi Darmian
   • Reza Rahgozar
   • Kambiz Narmashiri

   Technical paper 02 January 2022 Article: 133

   

4. Designing thickness of subgrade for flexible pavements incorporating waste foundry sand, molasses, and lime

   • Avinash Bhardwaj
   • R. K. Sharma

   Technical paper 29 December 2021 Article: 132

   

5. Innovative sustainable coconut husk mortar for ferrocement infrastructure solution

   • K. Kalaivani
   • K. Gunasekaran
   • R. Annadurai

   Technical paper 23 December 2021 Article: 131

   

6. Valorisation of face mask waste in mortar

   • Lassaad Ajam
   • Abderraouf Trabelsi
   • Zied Kammoun

   Technical paper 23 December 2021 Article: 130

   

7. Model test study on single and group under-reamed piles in sand under compression and tension

   • Mantu Majumder
   • Debarghya Chakraborty
   • Vishal Kumawat

   Technical paper 23 December 2021 Article: 129

   

8. A comprehensive review on intelligent traffic management using machine learning algorithms

   • Yash Modi
   • Ridham Teli
   • Manan Shah

   Review 22 December 2021 Article: 128

   

9. Liquid nitrogen effect on the fresh concrete properties in hot weathering concrete

   • Iman Kattoof Harith
   • Maan S. Hassan
   • Shatha S. Hasan

   Technical paper 20 December 2021 Article: 127

   

10. Active earth pressure on retaining walls with sloping backfill considering arching effect under rotation about base

    • Sudheesh Thiyyakkandi
    • P. Shankar
    • Alpha Lukose

    Technical paper 20 December 2021 Article: 126

    

11. An innovative technique of anchoring lacing bars with CFS sections for shear strengthening of RC beams

    • Javed Ahmad Bhat

    Technical paper 20 December 2021 Article: 125

    

12. Fatigue life analysis of steel–concrete composite bridge considering road surface conditions

    • Utkarsha Bhetuwal
    • Jagat Kumar Shrestha
    • Rojee Pradhananga

    Technical paper 20 December 2021 Article: 124

    

13. Crushed stone partially substituted with shredded-waste tyres of motorcycles for low-volume road base construction: a feasibility study in Sri Lanka

    • Arulanantham Anburuvel

    Technical paper 09 December 2021 Article: 123

    

14. Mechanical behaviour optimization of saw dust ash and quarry dust concrete using adaptive neuro-fuzzy inference system

    • George Uwadiegwu Alaneme
    • Elvis Michael Mbadike
    • Iberedem Monday Udousoro

    Technical paper 08 December 2021 Article: 122

    

15. Efficiency of incorporating Algerian ground granulated blast furnace slag as a supplementary cementitious material: a review

    • Mohammed Siline

    Review 08 December 2021 Article: 121

    

16. Investigations in twin-cell box girder bridges subjected to combined effects of bending and torsion

    • J. Chithra
    • Praveen Nagarajan
    • A. S. Sajith

    Technical paper 08 December 2021 Article: 120

    

17. Investigating the properties of roller-compacted rubberized concrete modified with nanosilica using response surface methodology

    • Musa Adamu
    • S. I. Haruna
    • Hani Alanazi

    State-of-the-art paper 03 December 2021 Article: 119

    

18. Assessment of flow characteristics through a grassed canal

    • Manal Gad
    • Mohamed F. Sobeih
    • Esam Helal

    Case study 03 December 2021 Article: 118

    

19. Influence of silica fume and ground granulated blast furnace slag on the engineering properties of ultra-high-performance concrete

    • Shubhum Prakash
    • Sanjay Kumar
    • Baboo Rai

    Technical paper 02 December 2021 Article: 117

    

20. Fresh mechanical and durability properties of alkali-activated fly ash-slag concrete: a review

    • H. S. Abhishek
    • Shreelaxmi Prashant
    • Mithesh Kumar

    Review Open access 01 December 2021 Article: 116

    

21. Evaluation of pavement quality concrete prepared with locally available supplementary cementitious materials

    • Rahul Kumar
    • Ranja Bandyopadhyaya
    • Hillol Chakravarty

    Practice-oriented paper 29 November 2021 Article: 115

    

22. Improvement of the geotechnical properties of a clay–sand mixture treated with lime

    • Abd Elmalik Goufi
    • Khelifa Harichane
    • Abdelmoumen Aala Eddine Driss

    Technical paper 29 November 2021 Article: 114

    

23. Development of an integrated sustainability optimization tool for infrastructure projects

    • Hossam E. Hosny
    • Ahmed H. Ibrahim
    • Elin A. Eldars

    Review 29 November 2021 Article: 113

    

24. Managing the corruption risk at the operation and maintenance stage in the construction projects in Iraq

    • Semaa Hazim Najim Alani

    Technical paper 29 November 2021 Article: 112

    

25. The green roof effect on the seismic response of RC frame structures

    • Emad A. Elhout

    Practice-oriented paper 29 November 2021 Article: 111

    

26. An intensive overview of warm mix asphalt (WMA) technologies towards sustainable pavement construction

    • Gautam Prakash
    • Sanjeev Kumar Suman

    Review 27 November 2021 Article: 110

    

27. A spreadsheet-based tool for optimal design of reinforced concrete cantilever retaining walls

    • Mansoor Shakeel
    • Rizwan Azam
    • Muhammad Rizwan Riaz

    Technical paper 27 November 2021 Article: 109

    

28. Physical and Rheological characterization of modified bitumen by NBR/EVA association

    • Madani Chinoun
    • Khedoudja Soudani
    • Smail Haddadi

    Technical paper 26 November 2021 Article: 108

    

29. Shear strength prediction of steel fiber-reinforced concrete beams without stirrups

    • Yazan Momani
    • Ahmad Tarawneh
    • Zaid Momani

    Technical paper 25 November 2021 Article: 107

    

30. Application of response surface method for optimization of stabilizer dosages in soil stabilization

    • Sagar D. Turkane
    • Sandeep K. Chouksey

    Technical paper 25 November 2021 Article: 106

    

31. Explicit soft computing model to predict the undrained bearing capacity of footing resting on aggregate pier reinforced cohesive ground

    • Saif Alzabeebee

    Technical paper 25 November 2021 Article: 105

    

32. The role of granite dust in engineered cement composites as a partial replacement of fine aggregate

    • Tamer I. Ahmed
    • D. E. Tobbala

    Technical paper 24 November 2021 Article: 104

    

33. Effects of acid–base solutions on some Turkish natural building stones: physico-mechanical and color changes

    • Engin Özdemir
    • Fatih Kantarcı
    • Didem Eren Sarıcı

    Case Study 24 November 2021 Article: 103

    

34. Comparative study of various interpretative methods of the pile load test

    • Ahrar Mahmood
    • Badee Alshameri
    • S. Muhammad Jamil

    Technical paper 24 November 2021 Article: 102

    

35. Risky zones in urban area: an analysis using fault tree and risk matrix method

    • Bahuguna Dalai
    • Vishrut S. Landge

    Technical paper 24 November 2021 Article: 101

    

36. Assessment of laboratory scale cylindrical sequencing batch reactor for the treatment of abattoir effluent

    • Asif Ansari

    Technical paper 24 November 2021 Article: 100

    

37. Active earth pressure on retaining wall with a relief shelf: a novel analytical method

    • Vinay Bhushan Chauhan
    • S. M. Dasaka

    Technical paper 24 November 2021 Article: 99

    

38. Intelligent modeling of unconfined compressive strength (UCS) of hybrid cement-modified unsaturated soil with nanostructured quarry fines inclusion

    • Kennedy C. Onyelowe
    • Fazal E. Jalal
    • Kizito Ibe

    Technical paper 23 November 2021 Article: 98

    

39. Impact of COVID-19 pandemic lockdown on the public transportation system and strategic plans to improve PT ridership: a review

    • Saladi S. V. Subbarao
    • Raghuram Kadali

    Review 19 November 2021 Article: 97

    

40. Rheological properties of bauxite residue: the role of tailings gradation and solids concentration

    • Shivesh Kumar
    • B. Hanumantha Rao

    Technical paper 18 November 2021 Article: 96

    

41. Characterization and thermal behavior of marble from northwestern Pakistan

    • Atta Ur Rehman
    • Waqas Ahmed
    • Muhammad Sajid

    Technical paper 13 November 2021 Article: 95

    

42. Comparative seismic performance assessment of RC and RC/ECC hybrid frame structures: a shake table study

    • Fasih Ahmed Khan
    • Muhammad Rashid
    • Akhtar Gul

    Technical paper 13 November 2021 Article: 94

    

43. Utilisation of waste glass powder to improve the performance of hazardous incinerated biomedical waste ash geopolymer concrete

    • Arunachalam Suresh Kumar
    • Muthiah Muthukannan
    • Rangaswamy Kanniga Devi

    Technical paper 11 November 2021 Article: 93

    

44. Prediction of pullout resistance of single footings and group footings

    • Dalia B. Hamdy
    • Amr Mohamed Radwan
    • Alshimaa Mohamed Kortam

    Technical paper 11 November 2021 Article: 92

    

45. Out-of-plane bending of masonry wall embedding with welded wire mesh (WWM) in different orientations

    • Donkupar Francis Marbaniang
    • Teiborlang Warjri
    • Comingstarful Marthong

    Technical paper 11 November 2021 Article: 91

    

46. Ultimate capacity of partially plugged pipe pile in sand

    • Aparna Verma
    • Jawaid S. M. Ali

    Technical paper 11 November 2021 Article: 90

    

47. Critical success factors for implementing PPP infrastructure projects in developing countries: the case of Vietnam

    • Dinh Tuan Hai
    • Nguyen Quoc Toan
    • Nguyen Van Tam

    Technical paper 11 November 2021 Article: 89

48. Utilization phosphogypsum as a construction material for road base: a case study in Vietnam

    • Huong Thi Thanh Ngo
    • Viet Quoc Dang
    • Thai Xa Doan

    Technical paper 11 November 2021 Article: 88

    

49. Unified model using artificial neural network for high strength fibrous concrete subjected to elevated temperature

    • Syed Kaleem Afrough Zaidi
    • Md. Ayaz
    • Umesh Kumar Sharma

    Technical paper 11 November 2021 Article: 87

    

50. Accuracy analysis of 2D numerical methods of deep-seated failure analysis in embankments on stone column reinforced ground

    • Lateef Ahmad Dar
    • Mohammad Yousuf Shah

    Technical paper 11 November 2021 Article: 86