1. Thermal degradation kinetics of functional polysiloxane with pendent γ-chloropropyl groups

   • Fuying Dong
   • Xinde Tang
   • Shengyu Feng

   Original Paper 06 January 2020 Pages: 1 - 14

   

2. Protection of copper from corrosion through electrodeposited poly-2,5-dimercapto-1,3,4-thiadiazole–TiO₂ composite film

   • K. Vinothkumar
   • M. G. Sethuraman

   Original Paper 06 January 2020 Pages: 15 - 34

   

3. Plasticized solid polymer electrolyte based on triblock copolymer poly(vinylidene chloride-co-acrylonitrile-co-methyl methacrylate) for magnesium ion batteries

   • T. Ponraj
   • A. Ramalingam
   • R. Manjuladevi

   Original Paper 06 January 2020 Pages: 35 - 57

   

4. Formulation and evaluation of interpenetrating network of xanthan gum and polyvinylpyrrolidone as a hydrophilic matrix for controlled drug delivery system

   • Maryam Anwar
   • Fahad Pervaiz
   • Saba Ijaz

   Original Paper 07 January 2020 Pages: 59 - 80

   

5. Polyvinyl alcohol–silver fractal structured nanodendrites: photochemical synthesis

   • Sulochana Deb
   • Deepali Sarkar

   Original Paper 07 January 2020 Pages: 81 - 91

   

6. Study of polydiacetylenes and rhodamine-800 mixed film at air–water interface and onto solid support: Trace of fluorescence resonance energy transfer (FRET)

   • Sudip Suklabaidya
   • Sekhar Chakraborty
   • Syed Arshad Hussain

   Original Paper 08 January 2020 Pages: 93 - 113

   

7. CdSe nanorod-reinforced poly(thiophene) composites in designing energy storage devices: study of morphology and dielectric behavior

   • Rashmi Singh
   • A. K. Bajpai
   • A. K. Shrivastava

   Original Paper 08 January 2020 Pages: 115 - 131

   

8. Effect of boron methacrylate monomer on the thermal and pressure-sensitive adhesive properties of 2-EHA-based copolymer latexes synthesized via mini-emulsion polymerization procedure

   • Ecem Temelkaya Bilgin
   • Cansu Akarsu Dülgar
   • İ. Ersin Serhatlı

   Original Paper 08 January 2020 Pages: 133 - 145

   

9. The crystallization behavior of poly(l-lactide)/poly(d-lactide) blends: effect of stirring time during solution mixing

   • Jun Shao
   • Lanli Xu
   • Haoqing Hou

   Original Paper 09 January 2020 Pages: 147 - 163

   

10. Synthesis of surface ion-imprinted polymer for specific detection of thorium under acidic conditions

    • N. A. F. Othman
    • S. Selambakkannu
    • N. Seko

    Original Paper 09 January 2020 Pages: 165 - 183

    

11. The synergetic effect of antimony (Sb₂O₃) and melamine cyanurate (MCA) on the flame-retardant behavior of silicon rubber

    • Xuezheng Huang
    • Zhenjun Tian
    • Jianxi Li

    Original Paper 09 January 2020 Pages: 185 - 202

    

12. Enhancing the adhesion strength of polyurethane coatings by dispersing layered silicates via sonication and high-shear mixing method

    • Sifiso John Skosana
    • Caroline Khoathane
    • Thomas Malwela

    Original Paper 10 January 2020 Pages: 203 - 221

    

13. The properties of nanofiber scaffolds of polyurethane-Cinnamomum zeylanicum against pathogens of Pseudomonas aeruginosa and Staphylococcus aureus

    • H. Hosseinpor
    • A. Khaledi
    • D. Esmaeili

    Original Paper 11 January 2020 Pages: 223 - 245

    

14. Study of formation constant, thermodynamics and β-ionone release characteristic of β-ionone-hydroxypropyl-β-cyclodextrin inclusion complex

    • Guangyong Zhu
    • Guangxu Zhu
    • Zuobing Xiao

    Original Paper 13 January 2020 Pages: 247 - 260

    

15. Size-controlled, single-crystal CuO nanosheets and the resulting polyethylene–carbon nanotube nanocomposite as antimicrobial materials

    • Numan Salah
    • Abdulrahman Muhammad Alfawzan
    • Adnan Memic

    Original Paper 19 January 2020 Pages: 261 - 281

    

16. Effects of dioctyl phthalate on the properties of poly(vinyl chloride)/organically modified montmorillonite nanocomposites

    • Cheng-Ho Chen
    • Yin-Lung Liou
    • Wei-Tung Liao

    Original Paper 20 January 2020 Pages: 283 - 294

    

17. Graft polymerization of acrylonitrile onto cross-linked (alginate/polyvinyl alcohol) beads initiated by potassium persulfate: synthesis and artificial neural network modeling

    • Sh. Kianfar
    • A. R. Keshtkar
    • B. Zarenezhad

    Original Paper 22 January 2020 Pages: 295 - 311

    

18. Cross-linking network structures and mechanical properties of novel HTPE/PCL binder for solid propellant

    • Shen Yuan
    • Shengkun Jiang
    • Yunjun Luo

    Original Paper 22 January 2020 Pages: 313 - 334

    

19. Preparation of PVA-PFSA-Si pervaporative hybrid membrane and its dehydration performance

    • Haikuan Yuan
    • Chengchong Wang
    • Jie Lu

    Original Paper 22 January 2020 Pages: 335 - 358

    

20. Physicochemical inspection and in vitro bioactivity behavior of bio-nanocomposite alginate hydrogels filled by magnesium fluoro-hydroxyapatite

    • Shadpour Mallakpour
    • Vajiheh Behranvand
    • Fereshteh Mallakpour

    Original Paper 24 January 2020 Pages: 359 - 375

    

21. Study on the effect of Kankara zeolite-Y-based catalyst on the chemical properties of liquid fuel from mixed waste plastics (MWPs) pyrolysis

    • Wilson Uzochukwu Eze
    • Innocent Chimezie Madufor
    • Michael Ifeanyichukwu Ugbaja

    Original Paper 25 January 2020 Pages: 377 - 398

    

22. Nano-silica-based urea–formaldehyde composite with some derivates of coumarin as formaldehyde scavenger: hydrolytical and thermal stability

    • Vojislav Jovanović
    • Suzana Samaržija-Jovanović
    • Milena Marinović-Cincović

    Original Paper 25 January 2020 Pages: 399 - 413

    

23. Synthesis and characterization of iron, cobalt and nickel complexes bearing para-phenylene-linked pyridine imine ligand and their catalytic properties for ethylene oligomerization

    • Liduo Chen
    • Lili Ma
    • Jun Wang

    Original Paper 03 February 2020 Pages: 415 - 432

    

24. New coating synthesis comprising CuO:NiO/C to obtain highly selective surface for enhancing solar energy absorption

    • Rasheed N. Abed
    • Mustafa Abdallh
    • Emad Yousif

    Original Paper 04 February 2020 Pages: 433 - 455

    

25. Synthesis and characterization of neem (Azadirachta indica) seed oil-based alkyd resins for efficient anticorrosive coating application

    • Parineeta Das
    • Namita Sharma
    • Nirmala Devi

    Original Paper 06 February 2020 Pages: 457 - 479

    

26. Preparation and properties of polyimides having porphyrin moieties for heavy metals removal

    • Zahra Rafiee
    • Liela Golriz
    • Saeed Kowkabi

    Original Paper 07 February 2020 Pages: 481 - 492

    

27. Determination of monomer reactivity ratios and thermal properties of poly(GMA-co-MMA) copolymers

    • Hossein Abdollahi
    • Vahid Najafi
    • Farzaneh Amiri

    Original Paper 12 February 2020 Pages: 493 - 511

    

28. Effects of the polymer composite composition and amine-based additives on the performance of a polymer composite CO₂ separation membrane

    • Fuminori Ito
    • Yuriko Nishiyama
    • Hidetaka Yamada

    Original Paper 13 February 2020 Pages: 513 - 528

    

29. Ethylene polymerization using diatomite as support for zirconocene dichloride/modified methylaluminoxane

    • Yu Xiao
    • wei Yang
    • Guangyuan Zhou

    Original Paper 01 August 2020 Pages: 529 - 537

    

30. A review featuring the fundamentals and advancements of polymer/CNT nanocomposite application in aerospace industry

    • Anila Iqbal
    • Aamer Saeed
    • Anwar Ul-Hamid

    Review Paper 06 January 2020 Pages: 539 - 557