Abstract.
Nonuniform heat generation models with constant and variable cross-section high-conductivity channels (HCCs) are built in this paper. The minimum dimensionless peak temperature (DPT) is taken as the optimization objective. Different from the models with uniform heat generation and constant cross-section HCCs built by Bejan (1997) and Ledezma et al. (1997), the model with nonuniform heat generation and variable cross-section HCC is more practical and can help to improve the heat conduction performance of a thermal system. The results show that for the rectangular first-order assembly (RFOA) with nonuniform heat generation, there exist both the optimal shape of the RFOA and the optimal HCCs width ratio, which lead to the minimum DPT. They are different from those with uniform heat generation. When the heat is nonuniformly generated in the RFOA, the minimum DPT of the RFOA with variable cross-section HCC is reduced by 12.11% compared with that with constant cross-section HCC. Moreover, the numerical results are also verified by the analytical method.
Similar content being viewed by others
References
A. Bejan, Int. J. Heat Mass Transfer 40, 799 (1997)
A. Bejan, Shape and Structure, from Engineering to Nature (Cambridge University Press, Cambridge, UK, 2000)
A. Bejan, S. Lorente, Design with Constructal Theory (Wiley, New Jersey, 2008)
G. Lorenzini, S. Moretti, A. Conti, Fin Shape Thermal Optimization Using Bejan's Constructal Theory (Morgan & Claypool Publishers, San Francisco, USA, 2011)
L.G. Chen, Sci. China: Tech. Sci. 55, 802 (2012)
T. Bello-Ochende, O.T. Olakoyejo, J.P. Meyer, A. Bejan, S. Lorente, Int. J. Heat Mass Transfer 57, 241 (2013)
J. Yang, S.R. Oh, W. Liu, Int. J. Heat Mass Transfer 77, 1144 (2014)
J. Yang, A.W. Fan, W. Liu, A.M. Jacobi, Energy Convers. Manag. 78, 468 (2014)
G.N. Xie, M. Asadi, B. Sunden, S.F. Zheng, Trans. ASME J. Electron. Packag. 136, 031013 (2014)
G.N. Xie, Y.D. Song, M. Asadi, G. Lorenzini, Trans. ASME J. Heat Transfer 137, 061901 (2015)
L.G. Chen, H.J. Feng, Multi-objective Constructal Optimizations for Fluid Flow, Heat and Mass Transfer Processes (Science Press, Beijing, 2016) (in Chinese)
A. Bejan, The Physics of Life: The Evolution of Everything (St. Martin's Press, New York, 2016)
A. Bejan, M.R. Errera, J. Appl. Phys. 119, 074901 (2016)
L.A.O. Rocha, S. Lorente, A. Bejan, Int. J. Heat Mass Transfer 45, 1643 (2002)
L. Ghodoossi, N. Egrican, J. Appl. Phys. 93, 4922 (2003)
S. Ghodoossi, N. Egrican, Energy Convers. Manag. 45, 811 (2004)
W.J. Wu, L.G. Chen, F.R. Sun, Appl. Energy 84, 39 (2007)
G. Marck, J.L. Harion, M. Nemer, S. Russeil, D. Bougeard, Energy Convers. Manag. 52, 1033 (2011)
M. Eslami, K. Jafarpur, J. Appl. Phys. 112, 104905 (2012)
L.G. Chen, H.J. Feng, Z.H. Xie, F.R. Sun, Int. J. Heat Mass Transfer 67, 704 (2013)
M. Neagu, A. Bejan, J. Appl. Phys. 86, 1136 (1999)
S.B. Zhou, L.G. Chen, F.R. Sun, Energy Convers. Manag. 48, 106 (2007)
S.H. Wei, L.G. Chen, F.R. Sun, Appl. Energy 86, 1111 (2009)
G. Ledezma, A. Bejan, M. Errera, J. Appl. Phys. 82, 89 (1997)
M. Almogbel, A. Bejan, Int. J. Heat Mass Transfer 42, 3739 (1999)
M. Almogbel, A. Bejan, Int. J. Heat Mass Transfer 44, 4185 (2001)
L.A.O. Rocha, S. Lorente, A. Bejan, Int. J. Heat Mass Transfer 49, 2626 (2006)
F. Sharifia, H. Ghaedaminib, M.R. Salimpour, Front. Heat Mass Transfer 3, 043005 (2012)
M.R. Salimpour, F. Sharifi, D. Menbari, Proc. ImechE, Part E: J. Process Mech. Eng. 227, 231 (2013)
A. Mazloomi, F. Sharifi, M.R. Salimpour, A. Moosavi, Int. Commun. Heat Mass Transfer 39, 1265 (2012)
G. Lorenzini, C. Biserni, L.A.O. Rocha, Int. J. Heat Mass Transfer 58, 513 (2013)
G. Lorenzini, C. Biserni, L.A.O. Rocha, Int. J. Therm. Sci. 71, 140 (2013)
H.J. Feng, L.G. Chen, Z.H. Xie, F.R. Sun, Int. J. Heat Mass Transfer 91, 162 (2015)
M.R. Hajmohammadi, V.A. Abianeh, M. Moezzinajafabadi, M. Daneshi, Appl. Therm. Eng. 61, 228 (2013)
M.R. Hajmohammadi, O. Joneydi Shariatzadeh, M. Moulod, S.S. Nourazar, Int. J. Therm. Sci. 77, 66 (2014)
M.R. Hajmohammadi, G. Lorenzini, O. Joneydi Shariatzadeh, C. Biserni, Trans. ASME J. Heat Transfer 137, 061001 (2015)
E. Cetkin, Trans. ASME J. Heat Transfer 137, 111901 (2015)
M.K. Ramis, G. Jilani, S. Jahangeer, Int. J. Heat Mass Transfer 51, 517 (2008)
P. Vessakosol, Control volume finite element method for thermal conduction analysis of a square plate subjected to non-uniform volumetric heat generation, in The 25th Conference of the Mechanical Engineering Network of Thailand, Krabi, October 19-21, 2011 (Mechanical Engineering Network of Thailand, 2011)
K.R. Gaikwad, K.P. Ghadle, J. Thermal Stresses 35, 485 (2012)
S.P. Pawar, K.C. Deshmukh, G.D. Kedar, Appl. Appl. Math. 10, 552 (2015)
C. Huh, M.H. Kim, Int. J. Heat Fluid Flow 42, 164 (2013)
M. El Haj Assad, Therm. Sci. 17, 943 (2013)
M.R. Hajmohammadi, S. Poozesh, M. Rahmani, A. Campo, Appl. Thermal Eng. 61, 268 (2013)
M.R. Hajmohammadi, M. Rahmani, A. Campo, Energy 68, 609 (2014)
J.C.O. Ruiz, C.O. Ruiz, J.A. Souza, J.V.C. Vargas, Dendritic cooling layer generator and method of fabrication, U.S. Patent: 8650521B1, 2014-02-11
E. Cetkin, J. Thermal Eng. 1, 1 (2015)
E. Cetkin, A. Oliani, J. Appl. Phys. 118, 024902 (2015)
M. Asorey, J.M. Munoz-Castaneda, J. Phys. A: Math. Theor. 41, 304004 (2008)
M. Asorey, J.M. Munoz-Castaneda, Nucl. Phys. B 874, 852 (2013)
N. Acharyya, M. Asorey, A. Balachandran, S. Vaidya, Phys. Rev. D 92, 105016 (2015)
J.M. Munoz-Castaneda, K. Kirsten, M. Bordag, Lett. Math. Phys. 105, 523 (2015)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Feng, H., Chen, L., Xie, Z. et al. Constructal design for a rectangular body with nonuniform heat generation. Eur. Phys. J. Plus 131, 274 (2016). https://doi.org/10.1140/epjp/i2016-16274-4
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjp/i2016-16274-4