Abstract
This paper presents the results of an experimental investigation on the deformation and cracking behaviors of ring-shaped granite specimens. Diametrical compression tests were conducted on ring-shaped granite specimens with inclusion and those without inclusion for comparison. The inclusion materials were of different strengths, stiffness, and sizes. Strain gauges (SGs) were amounted at the boundary of the hole to trace the strain evolutions, and digital image correlation (DIC) technique was used to identify the crack initiation and propagation process. The results indicated that the inclusion has a positive effect on the enhancement of the carrying capacity. The maximum carrying capacity of the specimen with low-strength inclusion decreases with increasing the inclusion diameter, while it first decreases and then increases when the inclusion diameter increases from 10 to 20 mm for the high-strength infilled specimens. The results of the strain evolutions analyzed by the SGs and DIC methods indicate that a lager hole diameter and a lower inclusion strength lead to a more intensive strain concentration around the hole. Due to the mismatch in the deformation at the rock–cement mortar interface, serious strain concentrations are induced, and hence leading to three types of failure, i.e., debonding between the interface, tensile crack in the granite, and tensile crack in the inclusion material.
Similar content being viewed by others
Abbreviations
- ΔD1 :
-
Vertical aperture change
- ΔD2 :
-
Horizontal aperture change
- BD:
-
Brazilian disc
- CMOS:
-
Complementary metal oxide semiconductor
- DIC:
-
Digital image correlation
- HS camera:
-
High-speed camera
- MPL:
-
Maximum peak load
- RS:
-
Ring-shaped specimen
- RS-LSCM:
-
Ring-shaped specimen with low-strength cement mortar
- RS-HSCM:
-
Ring-shaped specimen with high-strength cement mortar
- SG:
-
Strain gauge
- UCS:
-
Uniaxial compressive strength
References
Al-Harthi AA, Al-Amri RM, Shehata WM (1999) The porosity and engineering properties of vesicular basalt in Saudi Arabia. Eng Geol 54:313–320. https://doi.org/10.1016/S0013-7952(99)00050-2
Ashby MF, Hallam SD (1986) The failure of brittle solids containing small cracks under compressive stress states. Acta Metall 34:497–510. https://doi.org/10.1016/0001-6160(86)90086-6
Bai Q-S, Tu S-H, Zhang C (2016) DEM investigation of the fracture mechanism of rock disc containing hole(s) and its influence on tensile strength. Theor Appl Fract Mech 86:197–216. https://doi.org/10.1016/j.tafmec.2016.07.005
Bobet A (2000) The initiation of secondary cracks in compression. Eng Fract Mech 66:187–219. https://doi.org/10.1016/S0013-7944(00)00009-6
Bobet A, Einstein HH (1998a) Fracture coalescence in rock-type materials under uniaxial and biaxial compression. Int J Rock Mech Min Sci 35:863–888. https://doi.org/10.1016/S0148-9062(98)00005-9
Bobet A, Einstein HH (1998b) Numerical modeling of fracture coalescence in a model rock material. Int J Fract 92:221–252. https://doi.org/10.1023/A:1007460316400
Carter BJ, Lajtai EZ, Yuan Y (1992) Tensile fracture from circular cavities loaded in compression. Int J Fract 57:221–236. https://doi.org/10.1007/BF00035074
Chang X, Deng Y, Li Z, Wang S, Tang CA (2018a) Crack propagation from a filled flaw in rocks considering the infill influences. J Appl Geophys 152:137–149. https://doi.org/10.1016/j.jappgeo.2018.03.018
Chang X, Tang J, Wang G, Tang C (2018b) Mechanical performances of rock-like disc containing circular inclusion subjected to diametral compression. Arch Civil Mech Eng 18:356–370. https://doi.org/10.1016/j.acme.2017.07.008
Chen CS, Hsu SC (2001) Measurement of indirect tensile strength of anisotropic rocks by the ring test. Rock Mech Rock Eng 34:293–321. https://doi.org/10.1007/s006030170003
Ding Z, Jia J, Li X, Li J, Li Y, Liao J (2020) Experimental study and application of medium-length hole blasting technique in coal-rock roadway. Energy Sci Eng 8:1554–1566. https://doi.org/10.1002/ese3.612
Du K, Yang CZ, Su R, Tao M, Wang SF (2020) Failure properties of cubic granite, marble, and sandstone specimens under true triaxial stress. Int J Rock Mech Min Sci 130. https://doi.org/10.1016/j.ijrmms.2020.104309
Du M-R, Jing H-W, Su H-J, Zhu T-T, Chen M-L (2017) Strength and failure characteristics of sandstone containing two circular holes filled with two types of inclusions under uniaxial compression. J Cent South Univ 24:2487–2495. https://doi.org/10.1007/s11771-017-3661-z
Eberhardt E, Stimpson B, Stead D (1999) Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures. Rock Mech Rock Eng 32:81–99. https://doi.org/10.1007/s006030050026
Fredrich JT, Evans B, Wong T-F (1990) Effect of grain size on brittle and semibrittle strength: implications for micromechanical modelling of failure in compression. J Geophys Res Solid Earth 95:10907–10920. https://doi.org/10.1029/JB095iB07p10907
Haeri H, Khaloo A, Marji MF (2015) Fracture analyses of different pre-holed concrete specimens under compression. Acta Mech Sinica 31:855–870. https://doi.org/10.1007/s10409-015-0436-3
Hatzor YH, Palchik V (1997) The influence of grain size and porosity on crack initiation stress and critical flaw length in dolomites. Int J Rock Mech Min Sci 34:805–816. https://doi.org/10.1016/S1365-1609(96)00066-6
Heinz SR, Wiggins JS (2010) Uniaxial compression analysis of glassy polymer networks using digital image correlation. Polym Test 29:925–932. https://doi.org/10.1016/j.polymertesting.2010.08.001
Horii H, Nemat-Nasser S (1985) Compression-induced microcrack growth in brittle solids: axial splitting and shear failure. J Geophys Res Solid Earth 90:3105–3125. https://doi.org/10.1029/JB090iB04p03105
Janeiro RP, Einstein HH (2010) Experimental study of the cracking behavior of specimens containing inclusions (under uniaxial compression). Int J Fract 164:83–102. https://doi.org/10.1007/s10704-010-9457-x
Janio de Castro Lima J, Paraguassú AB (2004) Linear thermal expansion of granitic rocks: influence of apparent porosity, grain size and quartz content. Bull Eng Geol Environ 63:215–220. https://doi.org/10.1007/s10064-004-0233-x
Jespersen C, MacLaughlin M, Hudyma N (2010) Strength, deformation modulus and failure modes of cubic analog specimens representing macroporous rock. Int J Rock Mech Min Sci 47:1349–1356. https://doi.org/10.1016/j.ijrmms.2010.08.015
Kourkoulis SK, Markides CF, Pasiou ED (2015) A combined analytic and experimental study of the displacement field in a circular ring. Meccanica 50:493–515. https://doi.org/10.1007/s11012-013-9846-0
Li D-Y, Wang T, Cheng T-J, Sun X-L (2016a) Static and dynamic tensile failure characteristics of rock based on splitting test of circular ring. Trans Nonferrous Metals Soc China 26:1912–1918. https://doi.org/10.1016/S1003-6326(16)64307-8
Li D, Zhu Q, Zhou Z, Li X, Ranjith PG (2017) Fracture analysis of marble specimens with a hole under uniaxial compression by digital image correlation. Eng Fract Mech 183:109–124. https://doi.org/10.1016/j.engfracmech.2017.05.035
Li X, Feng F, Li D (2018) Numerical simulation of rock failure under static and dynamic loading by splitting test of circular ring. Eng Fract Mech 188:184–201. https://doi.org/10.1016/j.engfracmech.2017.08.022
Li X, Wu Q, Tao M, Weng L, Dong L, Zou Y (2016b) Dynamic Brazilian splitting test of ring-shaped specimens with different hole diameters. Rock Mech Rock Eng 49:4143–4151. https://doi.org/10.1007/s00603-016-0995-z
Miao S, Pan P-Z, Wu Z, Zhao S (2018) Fracture analysis of sandstone with a single filled flaw under uniaxial compression. Eng Fract Mech 204:319–343. https://doi.org/10.1016/j.engfracmech.2018.10.009
Munoz H, Taheri A (2017a) Local damage and progressive localisation in porous sandstone during cyclic loading. Rock Mech Rock Eng 50:3253–3259. https://doi.org/10.1007/s00603-017-1298-8
Munoz H, Taheri A (2017b) Specimen aspect ratio and progressive field strain development of sandstone under uniaxial compression by three-dimensional digital image correlation. J Rock Mech Geotech Eng 9:599–610. https://doi.org/10.1016/j.jrmge.2017.01.005
Munoz H, Taheri A (2019) Postpeak deformability parameters of localized and nonlocalized damage zones of rocks under cyclic loading. Geotech Test J 42:1663–1684. https://doi.org/10.1520/Gtj20170266
Munoz H, Taheri A, Chanda EK (2016) Pre-peak and post-peak rock strain characteristics during uniaxial compression by 3D digital image correlation. Rock Mech Rock Eng 49:2541–2554. https://doi.org/10.1007/s00603-016-0935-y
Palchik V (1999) Influence of porosity and elastic modulus on uniaxial compressive strength in soft brittle porous sandstones. Rock Mech Rock Eng 32:303–309. https://doi.org/10.1007/s006030050050
Papaliangas T, Hencher SR, Lumsden AC, Manolopoulou S (1993) The effect of frictional fill thickness on the shear strength of rock discontinuities. Int J Rock Mech Min Sci Geomech Abstr 30:81–91. https://doi.org/10.1016/0148-9062(93)90702-F
Park CH, Bobet A (2009) Crack coalescence in specimens with open and closed flaws: a comparison. Int J Rock Mech Min Sci 46:819–829. https://doi.org/10.1016/j.ijrmms.2009.02.006
Peng K, Liu Z, Zou Q, Wu Q, Zhou J (2020) Mechanical property of granite from different buried depths under uniaxial compression and dynamic impact: an energy-based investigation. Powder Technol 362:729–744. https://doi.org/10.1016/j.powtec.2019.11.101
Pereira JP (1997) Rolling friction and shear behaviour of rock discontinuities filled with sand. Int J Rock Mech Min Sci 34:244.e241–244.e217. https://doi.org/10.1016/S1365-1609(97)00037-3
Saadat M, Taheri A (2019a) Modelling micro-cracking behaviour of pre-cracked granite using grain-based distinct element model. Rock Mech Rock Eng 52:4669–4692. https://doi.org/10.1007/s00603-019-01862-0
Saadat M, Taheri A (2019b) A numerical approach to investigate the effects of rock texture on the damage and crack propagation of a pre-cracked granite. Comput Geotech 111:89–111. https://doi.org/10.1016/j.compgeo.2019.03.009
Steen BVD, Vervoort A, Napier JAL (2005) Observed and simulated fracture pattern in diametrically loaded discs of rock material. Int J Fract 131:35–52. https://doi.org/10.1007/s10704-004-3177-z
Tang CA, Kou SQ (1998) Crack propagation and coalescence in brittle materials under compression. Eng Fract Mech 61:311–324. https://doi.org/10.1016/S0013-7944(98)00067-8
Tang CA, Wong RHC, Chau KT, Lin P (2005) Modeling of compression-induced splitting failure in heterogeneous brittle porous solids. Eng Fract Mech 72:597–615. https://doi.org/10.1016/j.engfracmech.2004.04.008
Tao M, Li Z, Cao W, Li X, Wu C (2019) Stress redistribution of dynamic loading incident with arbitrary waveform through a circular cavity. Int J Numer Anal Methods Geomech 43:1279–1299. https://doi.org/10.1002/nag.2897
Wang S, Li X, Yao J, Gong F, Li X, Du K, Tao M, Huang L, Du S (2019) Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock. Int J Rock Mech Min Sci 122:104063. https://doi.org/10.1016/j.ijrmms.2019.104063
Wang SY, Sloan SW, Tang CA (2013) Three-dimensional numerical investigations of the failure mechanism of a rock disc with a central or eccentric hole. Rock Mech Rock Eng 47:2117–2137. https://doi.org/10.1007/s00603-013-0512-6
Wasantha PLP, Ranjith PG, Zhao J, Shao SS, Permata G (2014) Strain rate effect on the mechanical behaviour of sandstones with different grain sizes. Rock Mech Rock Eng 48:1883–1895. https://doi.org/10.1007/s00603-014-0688-4
Weng L, Huang L, Taheri A, Li X (2017) Rockburst characteristics and numerical simulation based on a strain energy density index: a case study of a roadway in Linglong gold mine, China. Tunn Undergr Space Technol 69:223–232. https://doi.org/10.1016/j.tust.2017.05.011
Weng L, Li XB, Taheri A, Wu QH, Xie XF (2018) Fracture evolution around a cavity in brittle rock under uniaxial compression and coupled static-dynamic loads. Rock Mech Rock Eng 51:531–545. https://doi.org/10.1007/s00603-017-1343-7
Weng L, Wu Z, Liu Q (2020) Influence of heating/cooling cycles on the micro/macrocracking characteristics of Rucheng granite under unconfined compression. Bull Eng Geol Environ 79:1289–1309. https://doi.org/10.1007/s10064-019-01638-4
Wong LNY, Einstein HH (2009) Systematic evaluation of cracking behavior in specimens containing single flaws under uniaxial compression. Int J Rock Mech Min Sci 46:239–249. https://doi.org/10.1016/j.ijrmms.2008.03.006
Wong RHC, Chau KT, Wang P (1996) Microcracking and grain size effect in Yuen Long marbles. Int J Rock Mech Min Sci Geomech Abstr 33:479–485. https://doi.org/10.1016/0148-9062(96)00007-1
Wu Q-H, Li X-B, Tao M, Zhao F-J, Weng L, Dong L-J (2018) Conventional triaxial compression on hollow cylinders of sandstone with various fillings: relationship of surrounding rock with support. J Cent South Univ 25:1976–1986. https://doi.org/10.1007/s11771-018-3888-3
Wu Q, Li X, Weng L, Li Q, Zhu Y, Luo R (2019a) Experimental investigation of the dynamic response of prestressed rockbolt by using an SHPB-based rockbolt test system. Tunn Undergr Space Technol 93:103088. https://doi.org/10.1016/j.tust.2019.103088
Wu Q, Weng L, Zhao Y, Guo B, Luo T (2019b) On the tensile mechanical characteristics of fine-grained granite after heating/cooling treatments with different cooling rates. Eng Geol 253:94–110. https://doi.org/10.1016/j.enggeo.2019.03.014
Yang G, Cai ZX, Zhang XC, Fu DH (2015a) An experimental investigation on the damage of granite under uniaxial tension by using a digital image correlation method. Opt Lasers Eng 73:46–52. https://doi.org/10.1016/j.optlaseng.2015.04.004
Yang SQ, Xu T, He L, Jing HW, Wen S, Yu QL (2015b) Numerical study on failure behavior of brittle rock specimen containing pre-existing combined flaws under different confining pressure. Arch Civil Mech Eng 15:1085–1097. https://doi.org/10.1016/j.acme.2015.03.005
Yang SQ, Yang DS, Jing HW, Li YH, Wang SY (2011) An experimental study of the fracture coalescence behaviour of brittle sandstone specimens containing three fissures. Rock Mech Rock Eng 45:563–582. https://doi.org/10.1007/s00603-011-0206-x
Yin T, Wu Y, Li Q, Wang C, Wu B (2020) Determination of double-K fracture toughness parameters of thermally treated granite using notched semi-circular bending specimen. Eng Fract Mech 226:106865. https://doi.org/10.1016/j.engfracmech.2019.106865
Zeng W, Yang S-Q, Tian W-L (2018) Experimental and numerical investigation of brittle sandstone specimens containing different shapes of holes under uniaxial compression. Eng Fract Mech 200:430–450. https://doi.org/10.1016/j.engfracmech.2018.08.016
Zhang X-P, Wong LNY (2012) Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach. Rock Mech Rock Eng 45:711–737. https://doi.org/10.1007/s00603-011-0176-z
Zhang X, Yi Y, Zhu H, Liu G, Sun L, Shi L, Jiang H, Ma S (2018) Measurement of tensile strength of nuclear graphite based on ring compression test. J Nucl Mater 511:134–140. https://doi.org/10.1016/j.jnucmat.2018.09.010
Zhang Z, Deng M, Wang X, Yu W, Zhang F, Dao V (2020) Field and numerical investigations on the lower coal seam entry failure analysis under the remnant pillar. Eng Fail Ana 115:104638. https://doi.org/10.1016/j.engfailanal.2020.104638
Zhao Y, Wang Y, Wang W, Wan W, Tang J (2017) Modeling of non-linear rheological behavior of hard rock using triaxial rheological experiment. Int J Rock Mech Min Sci 93:66–75. https://doi.org/10.1016/j.ijrmms.2017.01.004
Zhao Y, Zhang L, Wang W, Wan W, Ma W (2018) Separation of elastoviscoplastic strains of rock and a nonlinear creep model. Int J Geomech 18:04017129. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001033
Zhao YL, Zhang LY, Wang WJ, Pu CZ, Wan W, Tang JZ (2016) Cracking and stress-strain behavior of rock-like material containing two flaws under uniaxial compression. Rock Mech Rock Eng 49:2665–2687. https://doi.org/10.1007/s00603-016-0932-1
Zhao Z, Zhou D (2016) Mechanical properties and failure modes of rock samples with grout-infilled flaws: a particle mechanics modeling. J Nat Gas Sci Eng 34:702–715. https://doi.org/10.1016/j.jngse.2016.07.022
Zhou Z, Tan L, Cao W, Zhou Z, Cai X (2017) Fracture evolution and failure behaviour of marble specimens containing rectangular cavities under uniaxial loading. Eng Fract Mech 184:183–201. https://doi.org/10.1016/j.engfracmech.2017.08.029
Zhuang X, Chun J, Zhu H (2014) A comparative study on unfilled and filled crack propagation for rock-like brittle material. Theor Appl Fract Mech 72:110–120. https://doi.org/10.1016/j.tafmec.2014.04.004
Acknowledgements
This work was financially supported by the National Natural Science Foundation of China (51904101, 51774131, and 51974118), the Natural Science Foundation of Hunan Province (2020JJ5188) and the China Postdoctoral Science Foundation (2017M622524).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflicts of interest.
Additional information
Responsible Editor: Zeynal Abiddin Erguler
Rights and permissions
About this article
Cite this article
Wu, Q., Weng, L., Zhao, Y. et al. Deformation and cracking characteristics of ring-shaped granite with inclusion under diametrical compression. Arab J Geosci 13, 681 (2020). https://doi.org/10.1007/s12517-020-05718-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12517-020-05718-8