Abstract
Metal bonded diamond grinding wheels are often supplied with the central bore eccentric relative to the periphery. Trueing of these wheels and high speed miniature diamond cutters create problems in the manufacture of precision artefacts, particularly in the research environment. In many cases it is uneconomic or impractical to use the electrolytic in-process dressing or electrochemical dressing of the wheels. The paper proposes adaptations of traditional dressing methods.
Zusammenfassung
Oft ist bei metallgebundenen Diamant-Schleifscheiben der Außenumfang exzentrisch zur zentralen Aufnahmebohrung. Das Abrichten dieser Schleifscheiben und von Hochgeschwindigkeits-Miniaturdiamantscheiben schafft bei der Fertigung von Präzisionsteilen Probleme, insbesondere in Forschungsumgebung. In vielen Fällen ist es unwirtschaftlich oder auch praktisch nicht möglich, für die Schleifscheiben elektrolytisches In-process Abrichten oder elektrochemisches Abrichten vorzusehen. Im vorgelegten Beitrag werden Vorschläge zur Anpassung traditioneller Abrichtmethoden gegeben.
Similar content being viewed by others
References
Chetwynd, D. G., Cockerton, S. C., Smith, S. T., Fung, W. W.: The design and opration of monolithic X-ray interferometers for super-precision metrology. Nanotechnology 2 (1991), pp. 1–10.
Smith, S. T.: The machining of silicon with high speed miniature diamond cutters. J. Phys. D 23 (1990), pp. 607–616.
Ohmori, H., Nakagawa, T.: Mirror surface grinding of silicon wafers with electrolytic in-process dressing. Annals CIRP 39 (1990), No. 1, pp. 329–332.
Ohmori, H.;, Takahashi, T., Nakagawa, T.: Mirror surface grinding by metal bonded super-abrasive wheel with electrolytic in-process dressing. Proceedings of the 6th International Precision Engineering Seminar (IPES6) and 2nd International Conference on Ultraprecision in Manufacturing Engineering (UME2) “Progress in Precision Engineering” (May 1991), Braunschweig, Germany, pp. 153–165.
Ohmori, H.: Electrolytic in-process dressing (ELID) grinding for optical parts manufacturing. In: Proceedings of the 7th International Precision Engineering Seminar “International Progress in Precision Engineering” (May 1993), Kobe, Japan, pp. 134–148.
Suzuki, K., Uematsu, T., Yanase, T., Honma, M., Asano, S.: Development of a simplified electrochemical dressing method with twin electrodes. Annals CIRP 40 (1991), No. 1, pp. 363–366.
Author information
Authors and Affiliations
Additional information
Nach einem Vortrag, gehalten anläßlich des am 26. November 1997 an der Technischen Universität Wien veranstalteten 4. Internationalen Kolloquiums đMikro-und Nanotechnologie”
Rights and permissions
About this article
Cite this article
Hingle, H.T. Correction of eccentricity of metal bonded diamond grinding wheels. Elektrotech. Inftech. 115, 203–206 (1998). https://doi.org/10.1007/BF03159118
Issue Date:
DOI: https://doi.org/10.1007/BF03159118