Abstract
A complex of experimental investigation of geometric parameters of the zone of the tool contact with the workpiece material has been carried out. The shrinkage of chips, cutting forces and temperature on the rake face of a tool equipped with cBN-based polycrystalline superhard material in fine turning of hardened steel have been defined. Normal and shear stresses at the region of the tool contact with chips have been assessed. It has been shown that the regions of plastic and elastic contacts account, respectively, for 70 and 30% of normal force acting on the cutter rake face.
Similar content being viewed by others
References
Rozenberg, Yu.A., Rezanie materialov: Uchebnik dlya tekhn. VUZov (Cutting of Materials: textbook for tekhn. Institutes of higher education), Kurgan, RF: Izd. O JSS Polygraphic combine, Zaural’e, 2007.
Sverkhtverdye materialy. Poluchenie i primenenie (Superhard materials. Production and application), 6 vols, Novikov, N.V., Ed., Obrabotka materialov lezviinym instrumentom (Machining Materials with Cutting Tools), vol. 5, Klimenko, S.A., Ed., Kiev: Bakul’ ISM, National Academy of Sciences of Ukraine, 2006.
Aronzon, M.A., Tochenie stalei i splavov reztsami iz sinteticheskikh sverkhtverdykh materialov: Ucheb. Posobie (Turning of steels and alloys with cutters of synthetic superhard materials: School-book), Kuibyshev, RF: KuAI, 1977.
Manokhin, A.S., Klimenko, S.A., Kopeikina, M.Yu., Klimenko, S.An., Roshchupkin, V.V., and Lyakhovitskii, M.M., Tribology of cutting by tools equipped with cBN-based PSHM, J. Superhard Mater., 2014, vol. 36, no. 2, pp. 124–135.
Mazur, N.P., Vnukov, Yu.N., Grabchenko, A.I., et al., Osnovy teorii rezaniya materialov: uchebnik (Fundamentals of the theory of cutting materials: textbook), Mazur, N.P. and Grabchenko, A.I., Eds., Khar’kov, Ukraine: NTU KhPI, 2013.
Vul’f, A.M., Rezanie metallov (Cutting of metals), Leningrad: Mashinostroenie, 1973, pp. 87–89.
Promptov, A.I., Environment in mechanics of the cutting process, in Voprosy mechaniki i fiziki protsessov rezaniya i kholodnogo plasticheskogo deformirovaniya (Problems of mechanics and physics of cutting and cold plastic deformation), Series G: Processes of machining, machine, and tools, Kiev: Bakul Institute for Superhard Materials, National Academy of Sciences of Ukraine, 2002, pp. 44–52.
Zorev, N.N., Voprosy mechaniki protsessa rezaniya metallov (Problems of mechanics of the process of metals cutting), Moscow: Mashgiz, 1956.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.An. Klimenko, A.S. Manokhin, S.A. Klimenko, 2015, published in Sverkhtverdye Materialy, 2015, Vol. 37, No. 2, pp. 76–84.
About this article
Cite this article
Klimenko, S.A., Manokhin, A.S. & Klimenko, S.A. Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel. J. Superhard Mater. 37, 125–131 (2015). https://doi.org/10.3103/S1063457615020070
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457615020070