Abstract
Laccases have been reported for their ability to eliminate hazardous phenolic compounds by oxidative polymerization. The exploitation of the oxidative behavior of different laccase forms, namely free/native, free/PEGylated, immobilized/native and immobilized/PEGylated, was assessed in this study. We found that PEGylated and immobilized laccase forms have differentiated catalytic behavior revealing distinct conversion rates and differentiated poly(catechol) chains, as confirmed by UV–Visible spectroscopy, by the total content of OH groups and by MALDI-TOF spectroscopy. The synergy underlying on the immobilized/PEGylated enzyme forms reveal to be responsible for the highest conversion rates and for the longer polymers produced.
Similar content being viewed by others
Introduction
Laccases are multicopper proteins considered as one of the most promiscuous enzymes since they can catalyze a broad spectrum of aromatic compounds and their derivatives (Strong and Claus 2011). This makes laccases promising biocatalysts for applications in biotechnological processes, including the detoxification of industrial effluents, textile and petrochemical industries, polymer synthesis, bioremediation of contaminated soils, wine and beverage stabilization, medicine and cosmetic ingredients (Kunamneni et al. 2008). One of the potential applications is on the removal of environmental and industrial pollutants, like phenolic compounds (Rodríguez Couto and Toca Herrera 2006; Viswanath et al. 2014). Several studies have been reporting the polymerization of catechol highlighting different aspects related with the enzymatic catalysis like enzyme performance, degree of polymerization, conversion rate, among others. A study conducted by Gavrillas et al. reported the catechol biotransformation into high molecular species with purified laccase in contrast with the low molecular weight species obtained with a commercial enzyme (Gavrilaş et al. 2012). Aktaş and co-workers studied the kinetics of laccase polymerization reaction and confirmed that a general enzyme kinetics saturation response was observed for catechol substrate during their oxidation, which is probably due to the reduced laccase stability or to a drop in the dissolved oxygen concentration (Aktaş and Tanyolaç 2003b). Although there is a great commercial potential for laccase applications, its instability in harsh conditions is considered a huge issue and strategies need to be explored to stabilize laccase either by chemical modification, immobilization or other techniques (Forde et al. 2010; Shin-ya et al. 2005). Moreover, the elimination of the harsh solvents generally applied is also a concern related with the enzymatic oxidation reactions involving these types of compounds. Several studies have highlighted the identification of reaction products generated by the degradation of phenolic contaminants in water by laccases, however lacking information about the NMR of the final structures obtained (Asadgol et al. 2014; Catherine et al. 2016; Majeau et al. 2010; Shin-ya et al. 2005).
In previous works we, and others, have assessed the effect of PEG on the polymerization of catechol by laccase from Myceliophthora Thermophila (Mayolo-Deloisa et al. 2015; Su et al. 2017, 2018). We have found that the previous PEGylation of the enzyme lead to a threefold polymerization activity increase while the single addition of PEG (0.5 mg/mL) to the medium increased only 1.5-fold, when compared with native enzyme. Experiments in a porous acrylamide gel (Ursoiu et al. 2012), where all the catalysts were “frozen”, show no effect of PEG on laccase polymerase activity (Su et al. 2017). The presence of PEG (López-Cruz et al. 2006; Otsuka et al. 2012) increased the average DP by one unit (from 7 to 8) and it is believed that a good mixing between PEG and poly(catechol) enhanced the reaction, as suggested by Molecular Dynamic Studies.
Herein, we aim to study the role of both chemical PEGylation and immobilization on the polymerase activity of laccase. The chemical PEGylation was performed by following the methodology described by Daly et al. (2005). The Native and PEGylated laccase forms were immobilized onto epoxy resin according to the method previously described by Berrio et al. (2007) (see reactions in Fig. 1). The epoxy resins were chosen as supports due to their well-known chemistry described in literature (Brady and Jordaan 2009; Chen et al. 2008; Fernández-Fernández et al. 2013; Mateo et al. 2000). Reported data show considerable enhancement of laccases stability when silanized and glutaraldehyde-activated silica nanoparticles are used as supports (Liu et al. 2008). Jimmy and co-workers studied the immobilization of laccase onto epoxy resins-Eupergit C (Berrio et al. 2007) and a substantial stabilization effect against pH and temperature was observed upon immobilization.
Reactional schemes proposed for the immobilization of laccase onto epoxy resins: a covalent immobilization of native laccase (a1) and laccase PEGylated (a2); b1 activation of epoxy resin with (2-aminoethyl) polyethylene glycol (3 kDa); b2 covalent immobilization of native laccase onto PEG-activated resin via EDC/sulfo NHS method
The polymerization of catechol was conducted using: (a) native laccase immobilized onto epoxy resin and (b) PEGylated laccase immobilized onto epoxy resin and (c) native laccase immobilized onto PEG-activated resin. Control assays comprising the oxidation of catechol namely with free/native laccase and free/PEGylated laccase, were also performed. UV–Visible spectroscopy was conducted to follow the color change during polymerization. The precipitated polymers were washed with water and methanol to separate the enzyme and the unreacted monomer from the oligomers. The different powder fractions obtained after each washing step were characterized by the Total content of free OH groups (TCFOH), nuclear magnetic resonance spectroscopy (1H NMR) and matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) spectrometry.
Materials and methods
PEGylation of laccase
Laccase from M. thermophila (supplied by Novozymes, Denmark) was PEGylated as previously reported (Su et al. 2017) using the procedure reported by Daly et al.(2005). Briefly, 14.0 mL of 12 mg/mL laccase were reacted with 20 kDa, O-[2-(6-Oxocaproylamino) ethyl]-Omethylpolyethylene glycol at pH 5, 10 mM sodium phosphate buffer with 20 mM sodium cyanoborohydride. A control reaction without mPEG was also conducted in every experiment. The reactions were stirred rapidly for 17 h at 4 °C. After 10 min of mixing, the reagents were completely dissolved, and an aliquot (namely time 0 h) was taken. These samples were ultrafiltrated using a 30 kDa cellulose membrane mounted in an ultrafiltration apparatus. The PEGylated enzyme was then freeze-dried and analyzed by SDS-PAGE electrophoresis.
Immobilization of native and laccase PEGylated onto epoxy resin supports
The immobilization of native and laccase PEGylated onto epoxy methacrylate resins (Purelite Lifetech ECR enzyme immobilization resins: 300–600 Å) was conducted as follows: 2 mg/mL laccase (native or PEGylated) in 0.5 M acetate buffer (pH 5.0) were mixed with epoxy methacrylate (50 mg/mL) and then stirred for 48 h at 4 °C. The powder was then washed several times with water by centrifugation and dried under vacuum (Berrio et al. 2007).
Immobilization of native laccase onto PEG-activated epoxy resin supports
Firstly, PEG (O-(2-aminoethyl) polyethylene glycol): 3 kDa was used to activate epoxy by nucleophilic attack, as follows: 50 mg/mL PEG in 0.5 M acetate buffer (pH 5.0) was add to epoxy (50 mg/mL) and stirred for 48 h at 4 °C. The powder was washed with water by centrifugation and dried under vacuum. Afterwards, to 5 mg/mL laccase prepared in 0.1 M MES solution (100 mL), were add 40 mg of EDC and 110 mg sulfo-NHS (N-hydroxysuccinimide) and mixed for 15 min using orbital agitation at room temperature. The reaction was stopped with 140 µL 2-mercaptoethanol, and the pH adjusted to 7 with PBS (Phosphate-buffered Saline) solution (Bartczak and Kanaras 2011). The final step consisted to add the previously PEG-activated epoxy (10 mg/mL) into the mixed solution and let react for 2 h at room temperature with agitation. Finally, the samples were centrifuged with amicon tubes (100 kDa) to separate the unbound PEG and the free laccase.
Enzyme stability and half-life time of all laccase forms
The effect of temperature on the enzyme activity and stability of laccase was studied. For this the different forms of laccase were incubated with acetate buffer (pH 5) at 40, 50 and 60 °C, for 150 h. The activity of laccase was measured against ABTS according to the methodology described by Childs and Bardsley (1975). The half-life time of the different forms of laccase was calculated according to the Equation (Zille et al. 2003):
U0 is the enzyme activity at time zero; Ut is the enzyme activity at time t; t is the time of incubation, U is the 1 U is defined as the amount of enzyme that catalyzes the conversion of 1 µmol of substrate (ABTS) per minute.
Enzymatic-assisted polymerization of catechol by free laccase forms
Catechol polymerization was processed by incubating 5 mg/mL of monomer in different solutions: (a) 100 U/mL native laccase, (b) 100 U/mL PEGylated laccase, in acetate buffer (pH 5) (normalized concentration). The reactions were performed in a water bath at 40 °C for 8 h. Afterwards the powder was washed with different solvents, namely five water washings and two methanol washings, under centrifugation, to separate the maximum amount of protein and the non-reacted catechol from the small and big oligomers. Further all the powder fractions recovered from water and methanol extraction step were freeze-dried for posterior analysis. The polymerization reactions were followed during time by UV–Visible spectrometry using the same dilutions for all the solutions obtained.
Enzymatic-assisted polymerization of catechol by immobilized laccase forms
5 mg/mL of catechol were incubated with: Epoxy-native laccase, Epoxy-laccase PEGylated and Epoxy-PEG-laccase, separately. As controls, free/native laccase and immobilized/native were used to polymerize catechol using the same conditions. The reactions were performed in a water bath at 40 °C for 8 h using 100 U/mL enzyme. Afterwards the polymers were washed with water to remove the protein and separate the oligomers formed from the epoxy by centrifugation with amicon 10 kDa followed by freeze-drying. Then the freeze-dried powder was washed with different solvents, namely five water washings and two methanol washings, under centrifugation, to separate the maximum amount of protein and the non-reacted catechol from the small and big oligomers. Further all the powder fractions recovered from water and methanol extraction step were freeze-dried for posterior analysis. The polymerization reactions were followed during time by UV–Visible spectrometry using the same dilutions for all the solutions obtained.
Mass spectra analysis
The new polymers were analyzed by matrix-assisted laser desorption/ionization with time-of-flight (MALDI-TOF) using 2,5-dihydroxy benzoic acid (DHB) as the matrix (≥ 99.5%). The mass spectra were acquired on an Ultra-flex MALDI-TOF mass spectrophotometer (Bruker Daltonics GmbH) equipped with a 337 nm nitrogen laser. For this, the samples were dissolved in a TA30 (30% acetonitrile/70% trifluoroacetic acid) solution and mixed with a 20 mg/mL solution of DHB (1:1). Then a volume of 2 μL was placed in the ground steel plate (Bruker part no 209519) until dry. The mass spectra were acquired in analyzed using in linear positive mode.
1H NMR spectra
The precipitates obtained after washing with water and methanol under centrifugation were dissolved in a deuterated solvent, DMSO-d6, for 1H NMR evaluation. The amount of OH groups on the samples was evaluated by 1H NMR spectra after addition of two water drops to the previous samples in DMSO-d6. The spectra were acquired in a Bruker Advance III 400 (400 MHz) using the peak solvent as internal reference.
Determination of the total content of free OH groups
The total content of free OH groups before and after polymerization was performed using the Folin–Ciocalteu spectrophotometric method. The monomer and polymer solutions dissolved in DMSO (100 µL) were added to the mixture of Folin–Ciocalteu reagent (500 µL) and distilled water (6 mL), and the mixture was shaken for 1 min. Then Na2CO3 solution (15 wt%, 2 mL) was added to the mixture and shaken for 1 min. Later the solution was brought up to 10 mL by adding distilled water. After 2 h, the absorbance at 750 nm (25 °C) was measured. The total content of free OH was assessed by plotting a gallic acid calibration curve (from 1 to 1500 µg/mL). The equation of the gallic acid calibration curve was A = 0.2977c + 0.0368, and the correlation coefficient was r2 = 0.9988.
Results
Reaction turnover and amount of poly(catechol) formed
The amount of poly(catechol) produced after catalysis with the different forms of laccase, namely free/native LAC, free/PEGylated LAC, Epoxy/native LAC and Epoxy/PEGylated LAC, was evaluated by means of UV/visible spectroscopy. The results reveal that the presence of PEG greatly enhanced the amount of polymer produced (Modaressi et al. 2005; Shoda et al. 2016), either in solution (data from our previous work) or when linked to the enzyme (1.5-fold of increase) (Fig. 2). The catalysis of poly(catechol) with immobilized PEGylated laccase was also enhanced relatively to the immobilized native form. Comparing the catalysis with both, free/native and immobilized/native laccase forms, one can observe a slight decrease of the polymer amount. As expected, the catalytic activity decreases after immobilization due to lower mobility of the catalysts which has some molecular space occupied by the epoxy support.
Amount of poly(catechol) after catalysis with: free/native LAC, free/PEGylated LAC, immobilized/native LAC, immobilized/PEGylated LAC and immobilized onto epoxy activated/native; the polymerization was conducted for 8 h at 40 °C using 100 U/mLenzyme (λ = 400 nm; free/native laccase corresponds to 100%) (% of polymer produced was calculated by UV measurements)
It is noteworthy that the stability of native and chemically modified laccases was evaluated, and the results confirm the loss of activity of all the enzyme forms particularly pronounced at 60 °C. Free/PEGylated LAC and immobilized/PEGylated LAC present a higher stability than free/native enzyme confirming the stabilization role of both PEG and of the immobilization step (see Additional file 1: Table S1).
The role of laccase PEGylation and immobilization on catechol polymerization
After polymerization our goal was to perceive if we were in the presence of size-differentiated polymers and in which extent the PEGylation of the catalysts would influence the conversion rate of reaction and the final polymerization degrees.
From the data obtained one can infer that the amount of polymer produced is not the solely alteration observed when the chemically modified and immobilized enzymes were applied (Table 1). The nature of the polymer formed is quite different in size when PEGylated LAC is applied but is more evident when the PEGylated catalyst is in the immobilized form. The average DP increases from 7 to 8 when native/PEGylated is used but increases more considerably when the immobilized laccase form is used (DP = 7 versus DP = 10, comparing free and immobilized native laccase; DP = 8 versus DP = 14, comparing free and immobilized PEGylated laccase).
The MALDI-TOF data (Fig. 3 and Table 1) also reveal that the biocatalysis using the solid support lead to the formation of poly(catechol) with a higher polymerization degree (DP = 10 versus DP = 7) comparing both free/native and immobilized/native enzyme. The immobilized/PEGylated form present higher DP than free/PEGylated one (DP = 14).
The determination of the total content of free OH groups by different methodologies, namely Folin–Ciocalteu (Blainski et al. 2013; Singleton et al. 1999) and 1H NMR methods allowed us to distinguish different catalytic behaviour between all the laccase forms used for catechol polymerization. Comparing both native and PEGylated laccase forms, the data obtained show a significant decrease of the total content of OH groups for the modified form, even on free or in the immobilized form (see Additional file 2: Figure S1).
By 1H NMR spectra analysis one can perceive broad signals observed between δH 6.0 and 8.5 ppm, corresponding to the aromatic peaks of poly(catechol). This indicates that we are in the presence of complex mixtures after polymerization with all enzyme forms (Additional file 2: Figure S1). Due to spectra complexity no polymer structure can be elucidated. Still, another broad signal can be detected between δH 8.5 and 10.5 ppm, which corresponds to OH signal group. This assumption was confirmed by D2O addition to the NMR tube (data not shown). The OH content contained in all the reaction samples was calculated by 1H NMR integration and are presented in Table 1.
The immobilization of the catalysts, in the native or PEGylated form, influenced greatly the laccase performance as demonstrated in Fig. 4. Free/native LAC in solution conditions yields polymers with the typical dark brown color presenting a typical UV/Vis spectrum (Fig. 4, in purple). When immobilized, the enzymes produce green–brown polymers with a different spectra behavior (Fig. 4, in green).
Discussion
The catalytic ability of different laccase forms (free/native LAC, free/PEGylated LAC, immobilized/PEGylated LAC and Epoxy-PEG-LAC) to polymerize catechol was evaluated. Overall the data from Table 1 and Fig. 2, considering the amount of poly(catechol) formed and the polymerization degrees obtained, indicates that PEGylated laccase, free or immobilized onto the epoxy resin, seems to be the ideal catalyst for catechol polymerization. Previously Modaressi and co-workers described the protective role of PEG on laccase activity (Modaressi et al. 2005). Herein, we confirm also that the presence of PEG linked to the enzyme greatly enhanced the amount of polymer produced, as set by UV–Visible spectroscopy. The color change of the catechol solution is associated with a bathochromic shift and an increase in the UV–Vis absorption intensity indicates a greater degree of π-conjugation thus confirming polymerization (Jha and Halada 2011). The results demonstrate other potentiality of PEG, which can not only be used as stabilizer, in solution or linked to the enzyme, but also as a spacer/linker for the immobilization of laccase onto solid supports (López-Cruz et al. 2006).
The free hydroxyl content and MALDI-TOF data (Table 1, Fig. 3), the UV/visible spectra (Fig. 4) indicate that, independently on the amount of poly(catechol) produced, the different laccase forms used yield size-different polymers. The PEGylation and immobilization of the catalyst influence greatly the catalytic behavior of laccase. The role of PEG as template for polymerization reactions is not new, some works have already reported the role of this additive as template to assist polymerization reactions (Modaressi et al. 2005; Su et al. 2017; Wu et al. 1997). Previously we also confirmed that the oxidation of phenolics like catechol is favored when conducted in the presence of PEG, even in solution or linked to the enzyme. The PEGylation of laccase enhanced the polymerase activity by threefold compared with the native enzyme, while PEG in solution only increased polymerization by 1.5-fold. Our results were corroborated by molecular dynamics simulations which suggested the formation of a miscible complex between PEG and the poly(catechol) formed, pushing the reaction forward. Herein, our data also confirms these previous findings, showing higher conversion rates and longer polymers when PEGylated enzyme is applied. Moreover, the only report about the effect of PEGylated MtL on other substrates (López-Cruz et al. 2006) revealed that Kcat and Km are not significantly affected by PEGylation, confirming our previous assumptions.
Several reports highlight the conformational changes suffered by enzymes when immobilized which may alter their catalytic properties (Brady and Jordaan 2009; Fernández-Fernández et al. 2013; Halling et al. 2005). However, it is also established that when immobilized, the enzymes became stable and less susceptible to the medium interference like obstruction of the catalytic active site by the new polymers formed. Our data indicates that immobilized laccase gave rise to a higher decrease of the free hydroxyls, indicating the formation of a longer polymer. From UV/Visible spectra data one can predict a synergistic effect between PEGylation and immobilization, since immobilized/native enzyme did not reveal higher performance when compared with free/native catalyst. On the other hand, when PEGylated laccase form, or even native enzyme is immobilized onto PEG activated resin, the conversion increases and longer polymers are obtained. The immobilization of the catalyst together with the presence of the PEG are expected to stabilize the enzyme allowing the reactions to proceed longer with the formation of polymers with higher polymerization degrees. Comparing with several works reported in literature, the modified laccase forms herein presented are promising catalysts to efficiently produce longer polymers (Aktaş and Tanyolaç 2003a; Sun et al. 2013).
The literature related with the enzymatic polymerization of catechol report a typical polymer structure where the catechol units are connected by ether linkages. The reaction occurs by oxygen-carbon bonding at the para-position of the other monomeric unit. This position is more prone to be involved in the reaction binding rather than the orto-position, which involves more stereochemical impediments (Aktaş and Tanyolaç 2003; Aktaş et al. 2003; Liu et al. 2015; Sun et al. 2013; Zerva et al. 2016). Both formation of quinoid derivatives or homomolecular dimers coming from an intermolecular nucleophilic attack from the radicals formed by reaction with laccases have been described. The units composing these dimers are linked by C–C or C–O bonds by oxidative condensation, oxidative phenolic coupling or oxidative coupling. After a certain reaction time, this coupling can lead to the formation of oligomers or polymers (Catherine et al. 2016).
The complexity to identify these oligomers as well as to establish the corresponding polymerization reaction pathways, especially when different laccase forms are applied, is still a major drawback to overcome. The structure identification of some polymeric products is not completely clear and need deeper investigations. Moreover, despite the high number of works reporting the enzymatic polymerization of catechol, no elucidation about the polymer NMR is presented, neither about the fractionation of the final polymers obtained. The authors generally base their structural proposals on the previous findings reported previously. Contrarily to what is reported, after enzyme and unreacted catechol removal, we were not able to predict a possible polymer structure. The 1H NMR and C-13 NMR (not shown) reveal a very broad spectra which does not allow the correct prediction of the possible polymer structures. Even though, the structure generally assigned in literature as being the final poly(catechol) is also not identified in all the spectra acquired after catalysis with all enzyme forms. From all the spectra obtained one can infer that we are in the presence of a panoply of different polymer structures with differentiated lengths, however impossible to identify.
Abbreviations
- PEG:
-
polyethylene glycol
- DP:
-
the degree of polymerization
- TCFOH:
-
the total content of free OH groups
- NMR:
-
nuclear magnetic resonance spectroscopy
- MALDI-TOF:
-
matrix-assisted laser desorption/ionization-time of flight
- LAC:
-
laccase
- EDC:
-
1-ethyl-3-(3-dimethylaminopropyl) carbodiimide
- DHB:
-
2,5-dihydroxybenzoic acid
- DMSO:
-
dimethyl sulfoxide
References
Aktaş N, Tanyolaç A (2003a) Kinetics of laccase-catalyzed oxidative polymerization of catechol. J Mol Catal B 22(1–2):61–69
Aktaş N, Tanyolaç A (2003b) Reaction conditions for laccase catalyzed polymerization of catechol. Bioresour Technol 87(3):209–214
Aktaş N, Şahiner N, Kantoğlu Ö, Salih B, Tanyolaç A (2003) Biosynthesis and characterization of laccase catalyzed poly(catechol). J Polym Environ 11(3):123–128
Asadgol Z, Forootanfar H, Rezaei S, Mahvi AH, Faramarzi MA (2014) Removal of phenol and bisphenol-A catalyzed by laccase in aqueous solution. J Environ Health Sci Eng 12:93–98
Bartczak D, Kanaras AG (2011) Preparation of peptide-functionalized gold nanoparticles using one pot EDC/sulfo-NHS coupling. Langmuir 27(16):10119–10123
Berrio J, Plou FJ, Ballesteros A, Martínez ÁT, Martínez MJ (2007) Immobilization of Pycnoporus coccineus laccase on Eupergit C: stabilization and treatment of olive oil mill wastewaters. Biocatal Biotransform 25(2–4):130–134
Blainski A, Lopes G, de Mello J (2013) Application and analysis of the Folin Ciocalteu method for the determination of the total phenolic content from Limonium Brasiliense L. Molecules 18(6):6852–6865
Brady D, Jordaan J (2009) Advances in enzyme immobilisation. Biotechnol Lett 31(11):1639–1650
Catherine H, Penninckx M, Frédéric D (2016) Product formation from phenolic compounds removal by laccases: a review. Environ Technol Innov 5:250–266
Chen B, Hu J, Miller EM, Xie W, Cai M, Gross RA (2008) Candida antarctica lipase B chemically immobilized on epoxy-activated micro-and nanobeads: catalysts for polyester synthesis. Biomacromol 9(2):463–471
Childs RE, Bardsley WG (1975) The steady-state kinetics of peroxidase with 2,2′-azino-di-(3-ethyl-benzthiazoline-6-sulphonic acid) as chromogen. Biochem J 145(1):93–103
Daly SM, Przybycien TM, Tilton RD (2005) Adsorption of poly(ethylene glycol)-modified lysozyme to silica. Langmuir 21(4):1328–1337
Fernández-Fernández M, Sanromán MÁ, Moldes D (2013) Recent developments and applications of immobilized laccase. Biotechnol Adv 31(8):1808–1825
Forde J, Tully E, Vakurov A, Gibson TD, Millner P, Ó’Fágáin C (2010) Chemical modification and immobilisation of laccase from Trametes hirsuta and from Myceliophthora thermophila. Enzyme Microb Technol 46(6):430–437
Gavrilaş S, Dumitru F, Stănescu MD (2012) Commercial laccase oxidation of phenolic compounds. UPB Sci Bull Ser B 74:3–10
Halling PJ, Ulijn RV, Flitsch SL (2005) Understanding enzyme action on immobilised substrates. Curr Opin Biotechnol 16(4):385–392
Jha PK, Halada GP (2011) The catalytic role of uranyl in formation of polycatechol complexes. Chem Cent J 5(1):12
Kunamneni A, Plou FJ, Ballesteros A, Alcalde M (2008) Laccases and their applications: a patent review. Recent Pat Biotechnol 2(1):10–24
Liu Y, Guo C, Wang F, Liu CZ, Liu HZ (2008) Preparation of magnetic silica nanoparticles and their application in laccase immobilization. Chin J Process Eng 8:583–588
Liu H, Zhou P, Wu X, Sun J, Chen S (2015) Radical scavenging by acetone: a new perspective to understand laccase/ABTS inactivation and to recover redox mediator. Molecules 20(11):19907–19913
López-Cruz JI, Viniegra-González G, Hernández-Arana A (2006) Thermostability of native and pegylated Myceliophthora thermophila laccase in aqueous and mixed solvents. Bioconjug Chem 17(4):1093–1098
Majeau JA, Brar SK, Tyagi RD (2010) Laccases for removal of recalcitrant and emerging pollutants. Bioresour Technol 101(7):2331–2350
Mateo C, Abian O, Fernandez-Lafuente R, Guisan JM (2000) Increase in conformational stability of enzymes immobilized on epoxy-activated supports by favoring additional multipoint covalent attachment. Enzyme Microb Technol 26(7):509–515
Mayolo-Deloisa K, Gonzalez-Gonzalez M, Simental-Martinez J, Rito-Palomares M (2015) Aldehyde PEGylation of laccase from Trametes versicolor in route to increase its stability: effect on enzymatic activity. J Mol Recognit 28(3):173–179
Modaressi K, Taylor KE, Bewtra JK, Biswas N (2005) Laccase-catalyzed removal of bisphenol-A from water: protective effect of PEG on enzyme activity. Water Res 39(18):4309–4316
Otsuka H, Nagasaki Y, Kataoka K (2012) PEGylated nanoparticles for biological and pharmaceutical applications. Adv Drug Del Rev 64:246–255
Rodríguez Couto S, Toca Herrera JL (2006) Industrial and biotechnological applications of laccases: a review. Biotechnol Adv 24(5):500–513
Shin-ya Y, Aye HN, Hong K-J, Kajiuchi T (2005) Efficacy of amphiphile-modified laccase in enzymatic oxidation and removal of phenolics in aqueous solution. Enzyme Microb Technol 36(1):147–152
Shoda S-I, Uyama H, J-I Kadokawa, Kimura S, Kobayashi S (2016) Enzymes as green catalysts for precision macromolecular synthesis. Chem Rev 116(4):2307–2413
Singleton VL, Orthofer R, Lamuela-Raventós RM (1999) [14] Analysis of total phenols and other oxidation substrates and antioxidants by means of folin–ciocalteu reagent. Methods Enzymol 299:152–178
Strong PJ, Claus H (2011) Laccase: a review of Its past and its future in bioremediation. Crit Rev Environ Sci Technol 41(4):373–434
Su J, Noro J, Loureiro A, Martins M, Azoia NG, Fu J, Wang Q, Silva C, Cavaco-Paulo A (2017) PEGylation greatly enhances laccase polymerase activity. ChemCatChem 9(20):3888–3894
Su J, Fu J, Wang Q, Silva C, Cavaco-Paulo A (2018) Laccase: a green catalyst for the biosynthesis of poly-phenols. Crit Rev Biotechnol 38(2):294–307
Sun X, Bai R, Zhang Y, Wang Q, Fan X, Yuan J, Cui L, Wang P (2013) Laccase-catalyzed oxidative polymerization of phenolic compounds. Appl Biochem Biotechnol 171(7):1673–1680
Ursoiu A, Paul C, Kurtán T, Péter F (2012) Sol-gel entrapped Candida antarctica lipase B—a biocatalyst with excellent stability for kinetic resolution of secondary alcohols. Molecules 17(11):13045–13061
Viswanath B, Rajesh B, Janardhan A, Kumar AP, Narasimha G (2014) Fungal laccases and their applications in bioremediation. Enzyme Res 2014:1–21
Wu Y, Taylor KE, Biswas N, Bewtra JK (1997) Comparison of additives in the removal of phenolic compounds by peroxidase-catalyzed polymerization. Water Res 31(11):2699–2704
Zerva A, Manos N, Vouyiouka S, Christakopoulos P, Topakas E (2016) Bioconversion of biomass-derived phenols catalyzed by Myceliophthora thermophila laccase. Molecules 21(5):550–562
Zille A, Tzanov T, Guebitz G, Cavaco-Paulo A (2003) Immobilized laccase for decolourization of reactive black 5 dyeing effluent. Biotechnol Lett 25:1473–1477
Authors’ contributions
JS performed the experimental work and has written the first draft of the manuscript. JN performed and interpreted the NMR spectra and participate on MALDI-TOF experiments. CS and ACP revised the manuscript and supervised the experimental work. JF and QW gave several inputs on experimental procedures during the work. All authors read and approved the final manuscript.
Acknowledgements
This study was supported by Chinese Government Scholarship under China Scholarship Council (No. 201606790036) and Chinese Foundation Key projects of governmental cooperation in international scientific and technological innovation (No. 2016 YFE0115700) and by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684) and BioTecNorte operation (NORTE-01-0145-FEDER-000004) funded by European Regional Development Fund under the scope of Norte2020—Programa Operacional Regional do Norte. Jennifer Noro also thanks to FCT- Fundação para a Ciência e a Tecnologia for funding her scholarship (SFRH/BD/121673/2016). Carla Silva is an investigator FCT (SFRH/IF/00186/2015).
Competing interests
The authors declare that they have no competing interests.
Consent for publication and availability of data and materials
All authors agree with the publication and with the availability of data and material.
Ethics approval and consent to participate
This article does not contain any studies with human participants or animals performed by any of the authors.
Funding
This study was funded by the Chinese Government Scholarship, by the Chinese Foundation Key, by the European Regional Development Fund and by the Portuguese Foundation for Science and Technology (FCT).
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Author information
Authors and Affiliations
Corresponding author
Additional files
Additional file 1: Table S1.
Half-life time of enzymes vs temperature of incubation.
Additional file 2: Figure S1.
1H NMR of powder fraction polymerized by a) free/native laccase; b) free/PEGylated; c) immobilized/PEGylated laccase and d) native laccase immobilized onto PEG-activated resin, after washings with water and with methanol (in DMSO-d6).
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Su, J., Noro, J., Fu, J. et al. Exploring PEGylated and immobilized laccases for catechol polymerization. AMB Expr 8, 134 (2018). https://doi.org/10.1186/s13568-018-0665-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s13568-018-0665-5