Abstract
We present a single-wavelength Brillouin fiber laser utilizing a ring-cavity configuration. Performances and characteristics of the laser system have been investigated at different output coupling ratios. The optimum output power of the system stood at 7.3 mW, which was obtained at 90% output coupling ratio. A low Brillouin threshold power of 0.9 mW was obtained at 10% output coupling ratio when the Brillouin pump was set at its maximum power of 24 mW.
Similar content being viewed by others
References
G. P. Agrawal, Nonlinear Fiber Optics, 3rd ed. (Academic, San Diego, 2001).
A. A. A. Bakar, M. H. Al-Mansoori, M. A. Mahdi, M. S. Z. Abidin, and M. A. M. Azau, Laser Phys. Lett. 6, 59–63 (2009).
C. Ye, P. Yan, L. Huang, Q. Liu, and M. Gong, Laser Phys. Lett. 4, 376–381 (2007).
A. Debut, S. Randoux, and J. Zemmouri, Phys. Rev. A 62, 023803-1–023803-4 (2000).
V. Lecceuche, D. J. Webb, C. N. Pannell, and D. A. Jackson, Opt. Commun. 152, 262–268 (1998).
S. P. Smith, F. Zarinetchi, and S. Ezekiel, Opt. Lett. 16, 393–395 (1991).
F. Zarinetchi, S. P. Smith, and S. Ezekiel, Opt. Lett. 16, 229–231 (1981).
T. C. Rich and D. A. Pinnow, Appl. Opt. 13, 1376–1378 (1974).
M. Tateda, T. Horiguchi, T. Kurashima, and K. Ishihara, J. Lightwave Technol. 8, 1296–1272 (1990).
J. Subias, C. Heras, J. Pelayo, and F. Villuendas, Opt. Express 17, 6753–6758 (2009).
M. F. Ferreira, J. F. Rocha, and J. L. Pinto, Opt. Quantum Electron. 26, 34–44 (1994).
M. H. Al-Mansoori, A. W. Naji, S. J. Iqbal, M. K. Abdullah, and M. A. Mahdi, Laser Phys. Lett. 4, 371–375 (2007).
M. N. Mohd Nasir, M. H. Al-Mansoori, H. A. Abdul Rashid, P. K. Choudhury, and Z. Yusoff, Laser Phys. 18, 446–448 (2008).
M. H. Al-Mansoori, M. A. Mahdi, and A. K. Zamzuri, Laser Phys. Lett. 5, 139–143 (2008).
N. S. Shahabuddin, S. W. Harun, M. R. Shirazi, and H. Ahmad, Laser Phys. 18, 1344–1348 (2008).
Z. Abd Rahman, M. H. Al-Mansoori, S. Hitam, A. F. Abas, M. H. Abu Bakar, and M. A. Mahdi, Laser Phys. 19, 2110–2114 (2009).
M. N. Mohd Nasir, Z. Yusoff, M. H. Al-Mansoori, H. A. Abdul Rashid, and P. K. Choudhury, Laser Phys. 19, 2027–2030 (2009).
H. Ahmad, M. Z. Zulkifli, A. A. Latif, K. Thambiratnam, and S. W. Harun, Laser Phys. 19, 2188–2193 (2009).
J. C. Yong, L. Thevenaz, and B. Y. Kim, J. Lightwave Technol. 21, 546–554 (2003).
J. Geng, S. Staines, Z. Wang, J. Zong, M. Blake, and S. Jiang, IEEE Photon. Technol. Lett. 18, 1813–1815 (2006).
M. R. Shirazi, N. S. Shahabuddin, S. N. Aziz, K. Thambiratnam, S. W. Harun, and H. Ahmad, Laser Phys. Lett. 5, 361–363 (2008).
A. K. Ghatak and K. Thyagarajan, Optical Electronics (Cambridge Univ., Cambridge, 1989).
M. Ajiya, M. A. Mahdi, M. H. Al-Mansoori, Y. G. Shee, S. Hitam, and M. Mokhtar, Laser Phys. Lett. 6, 535–538 (2009).
C. McIntosh, A. Yeniay, J. Toulouse, and J.-M. P. Delavaux, Opt. Fiber Technol. 3, 173–176 (1997).
P. Zhang, S. Hu, S. Chen, Y. Yang, and C. Zhang, Chinese Opt. Lett. 7, 495–497 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Text © Astro, Ltd., 2010.
The article is published in the original.
Rights and permissions
About this article
Cite this article
Hambali, N.A.M.A., Mahdi, M.A., Al-Mansoori, M.H. et al. Effect of output coupling ratio on the performance of ring-cavity Brillouin fiber laser. Laser Phys. 20, 1618–1624 (2010). https://doi.org/10.1134/S1054660X10130049
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1054660X10130049