Abstract
Cooperativity is a feature many multimeric proteins use to control activity. Here we show that the bacterial heptose isomerase GmhA displays homotropic positive and negative cooperativity among its four protomers. Most similar proteins achieve this through conformational changes: GmhA instead employs a delicate network of hydrogen bonds, and couples pairs of active sites controlled by a unique water channel. This network apparently raises the Lewis acidity of the catalytic zinc, thus increasing the activity at one active site at the cost of preventing substrate from adopting a reactive conformation at the paired negatively cooperative site – a “half-site” behavior. Our study establishes the principle that multimeric enzymes can exploit this cooperativity without conformational changes to maximize their catalytic power and control. More broadly, this subtlety by which enzymes regulate functions could be used to explore new inhibitor design strategies.
Similar content being viewed by others
Introduction
Cooperativity is a fundamental feature of many multi-subunit enzymes1,2,3. Cooperativity critically allows enzymes to make step-like rate responses to substrate concentration changes, and so offer rapid responses to changing cellular conditions. It is a key to link enzymes – the molecular building blocks of life – to the system-level events, such as signaling pathways and cellular responses. The effects of cooperativity have been characterized structurally in many systems4. Despite the simplicity of the underlying principle, different enzymes seem to adopt different strategies to accomplish cooperative conformational changes. Understanding how cooperativity is manifested in individual enzymes offers the opportunity to further understand the molecular basis of enzyme catalysis and facilitate drug discovery.
Both positive and negative homotropic cooperativity have been observed in a wide range of enzymes5. Positive cooperativity amplifies the sensitivity of the enzyme’s ligand binding capacity upon increase of ligand concentration and is important for maintaining the responsiveness of biological systems6. In negatively cooperative enzymes, binding of the first ligand reduces the affinity of binding of subsequent ligands, of particular relevance to ligand binding in signaling networks7.
Furthermore, it is not uncommon for proteins to display both positive and negative cooperativity to the same ligand. For example, yeast glyceraldehyde-3-phosphate dehydrogenase has long been studied as a model of cooperativity, as it has both positive and negative cooperativity for its substrate NAD+ 8. This was used as a partial proof for the validity of the “sequential” (Koshland-Némethy-Filmer) model of cooperativity9. Similarly, both positive and negative cooperativity has been observed in DNA binding proteins10. The extreme form of negative homotropic cooperativity is the so-called “half-site” reactivity, where enzyme active sites are paired, and only one can be active at a time11,12. Many enzymes consisting of tetramers or higher order multimers are made from two or more pairs of such coupled sites. These enzymes can then also display positive cooperativity towards the same ligand.
This half-site effect has generally been explained by an allosteric conformational change upon ligand binding that prevents binding at the paired site. Indeed, observation of half occupancy in a crystal structure is considered definitive of enzymes following the sequential model11. However, in some cases of half-site occupancy the conformational changes are too subtle for this definitive change to be observed. In these cases, molecular and quantum mechanics must be used to explain the half-site reactivity13.
The sugar isomerase (SIS) family of enzymes catalyze a wide range of isomerase reactions involved in sugar interconversions14. They generally bind to sugar phosphates, using the phosphate to provide affinity, and catalyzing reactions at other positions in the sugar15,16. This SIS family of enzymes show an interesting range of active site chemistries: the same evolutionarily conserved scaffold is used to coordinate different active site side chains to drive a variety of reactions throughout the family. This wide range of potential routes to control activity, and the differing numbers of subunits in different proteins (these enzymes are all either dimers or tetramers), offer evolution the opportunity to fine-tune the activity of SIS enzymes to cellular need.
One potentially interesting set of SIS enzymes are the heptose isomerases (GmhA)14,16,17. These tetrameric proteins catalyze the conversion of the pentose phosphate pathway intermediate sedoheptulose-7-phosphate (S7P) into d-manno-heptopyranose-7-phosphate (Supplementary Fig. 1). This product is then further modified to provide bacteria with heptoses for the production of polysaccharides. In particular, many Gram-negative bacteria incorporate heptoses into their lipopolysaccharide (LPS) core, and mutants with disrupted heptose production are highly susceptible to antibiotics16. Inhibitors of heptose biosynthesis could therefore potentiate other antibiotics. GmhA, a key enzyme along the heptose biosynthesis, has been identified as a novel target for antimicrobial intervention towards Gram-negative bacteria18,19.
Development of high affinity inhibitors against GmhA requires a firm understanding of its mechanism. The structure of the tetrameric GmhA has been solved from several organisms20,21,22,23,24. Among these, the structure with the most interesting features is GmhA from B. pseudomallei, a tetramer with a zinc ion at the heart of the active site, coordinating by the sidechains of H64, E68, Q175 and H183. All of these side chains are completely conserved amongst GmhA orthologues, and mutations in all of them significantly reduce activity. GmhA defines a distinct class of SIS domains in Pfam25. Unlike other SIS domains, which generally form dimers with active sites at considerable distances from one another (e.g.26,27,28), GmhA forms pairs of adjacent actives sites separated by 15 Å, linked by a solvent filled channel (Supplementary Fig. 2).
To further investigate GmhA’s catalytic mechanism and how it controls the activity of its tetrameric structure, we constructed and characterized GmhA and two variants with one or three active sites ablated. We observed clear evidence for positive cooperativity with a Hill coefficient of 1.5–2 in all samples. Surprisingly, we discovered that loss of one active site had no effect on activity; and that loss of three still left nearly 40% of wild-type activity. This strongly suggests that GmhA operates as a half-site reactivity enzyme. To test the molecular basis for this, we solved the structure of an inactive GmhA (Q175E) with substrate bound. This structure is almost indistinguishable from the previously solved unliganded, or product bound structures, precluding an allosteric conformational change that is often associated with enzyme cooperativity. Conversely, quantum mechanical (QM) calculations using active site models revealed that GmhA achieves negative cooperative control of its paired active sites through the solvent-filled channel that bridges these two active sites. Only one of such active site is able to bind to the substrate after energy optimization. Modeling of the global hydrogen bonding network suggested that positive cooperativity occurs between the two pairs of half-sites, with defined active sites showing cooperativity for each other. The half-site reactivity of GmhA gives it distinct advantage to control this step in heptose biosynthesis, hence the knowledge of cooperativity could be explored in inhibitor discovery.
Results and Discussion
GmhA shows both positive and negative cooperativity
Our previous study identified D61, which resides in the solvent filled channel, as an important residue in the activity of GmhA20 (Supplementary Fig. 2). The D61A mutation reduces the enzyme activity to 6% of wild-type – a greater effect than mutation of the zinc coordinating H6420. We therefore reasoned that there might be some cooperativity effects between the paired active sites in GmhA. We improved the enzyme assay in the present study, and were able to collect kinetic data sufficiently accurate to allow us to fit the substrate binding data to both Michaelis-Menten, and cooperative models (Fig. 1a). Statistical comparison of the fits indicated a 99% confidence in the cooperative model, with a Hill coefficient of 1.5 ± 0.2.
Cooperativity of GmhA. (a) Detailed assay of wild-type GmhA reveals that the enzyme shows positive cooperativity (>99% confidence in cooperative model, Akaike’s information criteria; n = 1.5 ± 0.2 (SEM)). (b) Comparison of GmhA with four active sites (black), three intact active sites (red) and one intact active site (blue; double concentration of enzyme added; cf. Supplementary Fig. 3) shows that each sample is cooperative (cf. Supplementary Fig. 4). Loss of one active site has no change from wild-type, within error; whilst over one third of wild-type activity remains after loss of three out of four active sites. All experiments were performed in triplicate. Error bars show standard error in the mean. Images generated using GraphPad.
This Hill coefficient represents a significant level of cooperativity, and is not uncommon for enzymes. However, as GmhA has four subunits in all characterized orthologues, a greater level of cooperativity is generally possible. We reasoned that, as the SIS family of enzymes are generally either dimers or tetramers, cooperativity might only exist between the subunits that represent the minimal dimeric arrangement. In GmhA, these two active sites are linked by a water filled channel lined by D61. We therefore prepared GmhA chimeras with one or three active sites rendered inoperative by co-expression of D98N and E115K mutants: D98 assists in substrate binding and cyclization of the product (Supplementary Fig. 1b). The E115K mutation is a single nucleotide polymorphism found between the commonly used K96243 and 1710b strains of B. pseudomallei. E/K115 is located at the surface of the protein, well away from any active site, and the charge switch facilitates separation of chimeras (Supplementary Fig. 3). Analysis of the kinetics of each chimera again indicated that each enzyme fitted best to a cooperative model (Supplementary Fig. 4). This was the case even for the sample with a single intact active site. This suggests that the active sites that are not able to turn over the substrate might nevertheless bind substrate; and that this binding has the same cooperative effect as an intact active site.
Comparison of these chimeras to the wild-type enzyme showed that all three samples had a very similar K ½ around 130 μM (Fig. 1b; Table 1). However, surprisingly, the sample with three active subunits showed a similar activity (k cat 0.43 ± 0.02 s−1 per protomer; k cat 0.57 ± 0.02 s−1 per intact active site) to the sample with all active sites intact (k cat 0.44 ± 0.02 per promoter and active site; within error of the wild-type sample); and the sample with only one active subunit showed approximately one-third of the wild-type activity (k cat 0.144 ± 0.008 s−1 per promoter; k cat 0.57 ± 0.03 s−1 per intact active site). A drop in activity would be expected on the loss of one active site, especially in the light of the positive cooperativity observed, as indicated by a Hill coefficient greater than 1. These results suggested that, as well as the positive cooperativity observed, there might be negative cooperativity occurring between pairs of active sites, so that loss of one active site would not affect the rate.
Structures of B. pseudomallei GmhA active site mutants provide insight into the mechanism of cooperativity
Two previous structures of GmhA have only shown the product bound to the active site20,22. A substrate bound structure was obtained, albeit in an “open”, inactive conformation22. To assist in modeling the catalytic complex of GmhA, we determined in the present study the crystal structure of four active site mutants shown to affect activity (D61A, H64Q, E68Q, and Q175E), soaked with the reaction substrate S7P (Supplementary Table 1). Pleasingly, one of these mutants (Q175E) showed the substrate clearly in all four active sites, in a conformation suggestive of a pre-catalysis complex (Fig. 2a). The two substrate oxygen atoms involved in the reaction are both forming coordination bonds to the zinc ion at the heart of the active site of B. pseudomallei GmhA, at distances between 2.3–2.6 Å. The zinc ion coordination changes to octahedral from the pentahedral and tetrahedral coordination previously observed20 to accommodate these additional ligands. Comparison of the substrate bound structure to either unliganded or product bound structure showed negligible differences in the overall conformation of the enzyme (RMS deviation of 0.266 Å; Fig. 2b; Supplementary Fig. 5). As conformational changes that break symmetry are considered diagnostic of half-site enzymes, this suggested that a different, novel mechanism must be causing the half-site effect in GmhA.
Structures of GmhA mutants soaked with substrate reveal substrate binding modes. (a) The structure of the GmhA Q175E mutant soaked with S7P shows substrate in a “pre-reaction” conformation, poised for reaction. The O1 and O2 atoms of S7P make coordinate bonds with the zinc ion, which adopts an octahedral conformation. Inset: GmhA overall structure in the same orientation as images A-C. (b) The superimposed structures of apo (green; PDB ID: 2X3Y) and substrate bound (PDB ID: 5LTZ, magenta, this study) GmhA. There is no significant alteration in the structure, with an RMS deviation of 0.266 Å between the 4,659 aligned atoms in the structures. (c) The structure of the GmhA E68Q mutant soaked with S7P shows a mixture of substrate in a non-reactive configuration (cyan), and product (yellow; in the conformation previously observed20,22). (d) The structure of the GmhA D61A soaked with S7P shows product, in the same conformation as the product seen in the E68Q mutant (c). (e) Comparison of the channel between pairs of active sites in the Q175E (left) and D61A mutant (right) shows a significant alteration in the water structure in the mutant. Colors: GmhA chain A, sky blue; chain B, white; chain C, green; chain D, brick red; substrate S7P carbon, cyan; product M7P carbon, yellow; oxygen, red; nitrogen, blue; phosphorus, orange; zinc, purple sphere; water, red sphere. Density shown as blue netting is the 2F o -F c map, contoured at 1 σ. Figure generated using PyMOL.
Surprisingly, the structure of the E68Q (Fig. 2c) mutant showed a mixture of substrate and product, with some two active sites showing approximately equal quantities of both and the other two showing an excess of product. The substrate was not interacting with the zinc, but was located out of coordination distance from this, with the two reactive oxygen atoms O1 and O2 displaced by an average of 3.2 Å and 4.5 Å respectively. Similar results were seen in all four active sites in the crystal structure. In contrast, the structure of H64Q showed the substrate in a similar location to that seen in the E68Q mutant (Supplementary Fig. 6), whilst the structure of the D61A mutant showed strong density for the product (Fig. 2d). Inspection of the solvent filled channel in the D61A mutant showed that the channel water structure was significantly disrupted (Fig. 2e), shifting from an asymmetric water distribution to a symmetric distribution. As this was the only apparent difference between this structure and the wild-type complex, this suggested that this channel might be of functional significance for GmhA. Taken together with our earlier results on the cooperativity of GmhA (Fig. 1, Table 1) and the activity of D61A and H64Q mutants (6% and 14% of wild-type respectively20), we reasoned that GmhA may use the short-range hydrogen bonding network between the water molecules in this channel, D61 and H64 (which coordinates to the zinc in the active site) to enable communication between the two paired active sites. This may lead to either the positive or negative cooperativity.
Quantum mechanical calculations of the GmhA active site models
Armed with the structure of the likely substrate posture before catalysis based on our mutant crystal structures, we performed QM geometry optimizations of the active site models. The purpose of these models is to provide further insights into how the solvent filled channel, in particular H64, D61 and the water molecules, exerts influence on the coordination of zinc, and hence the substrate binding. Initial studies on the single active site model (Model 1, Fig. 3a) were in agreement with the crystal structures: in the absence of substrate, a tetrahedral geometry is preferred in the coordination state of H64, E68, Q175 and H183 to the active site zinc ion. This changes to octahedral in the presence of substrate S7P, with O1 and O2 of the substrate making coordination bonds with zinc (Zn-O1 distance = 2.16 Å and Zn-O2 distance = 2.48 Å; Model 2; Fig. 3b). Following this, we built a model of paired active sites (Model 3), linked by a water molecule and D61 from the solvent channel (Supplementary Fig. 2). In the absence of substrate, the two active sites are largely equivalent. When one substrate binds to the paired model (Model 4; Supplementary Table 2), the zinc ion in one active site changes to octahedral coordination accommodating two substrate oxygens as ligands; the difference between the two paired active sites becomes apparent when a second substrate is added to the model (Model 5 and Model 5water): here, the Zn-O1 distance is significantly increased from ~2.16 Å as seen from Model 2 and 2.19 Å in Model 4 to 3.14 Å in Model 5water. The difference is even more pronounced in Model 5, in which the water molecule bridging between Q175 and D61 in Model 5water is removed and the sidechain of Q175 forms hydrogen bond directly to D61. There is a strong preference not to bind to substrate at the second active site (Fig. 3d, Supplementary Table 2). Substrate in the second active site is pushed away from the zinc (Zn-O1 distance = 3.78 Å and Zn-O2 distance = 3.50 Å), in a manner reminiscent of the substrate observed in the structure of the E68Q mutant (Fig. 2c).
Quantum mechanical modeling of the GmhA active site. (a) In the absence of substrate, the zinc ion in the GmhA active site models to a tetrahedral configuration (black dashed lines showing coordination bonds), reflecting crystal structures. (b) On adding substrate (modelled as the final three carbons of S7P), the zinc coordination changes to an octahedral configuration, reflecting the configuration seen in the Q175E mutant (Fig. 2a). (c) When a pair of active sites is modeled with the connecting water channel, including water atoms as a proxy for S58, one zinc ion (left) adopts an octahedral configuration, whilst the other (right) adopts a tetrahedral coordination, pushing the substrate S7P away from the zinc ion. The hydrogen bonding network linking the two active sites is shown through blue dashed lines. (d) A similar model to (c) omitting S58, shows a similar pattern of zinc coordination and hydrogen bonding in the channel linking the active sites. However, in this model the nitrogen atom of Q175 forms a hydrogen bond with D61 (unlike in the crystal structure; purple dashes), rather than adopting a position to act as a hydrogen bond donor to the substrate and intermediate. Colors: chain 1 carbon, sky blue; chain 2 carbon, brick red; substrate carbon, yellow; oxygen, red; nitrogen, blue; hydrogen, white; zinc, gray sphere.
Zinc’s charge is related to its electron-accepting ability as a Lewis-type catalyst in metalloenzymes. Interestingly, both zinc ions within the unliganded paired active site models exhibit slightly increased charges (1.292 and 1.302 in Model 3) compared to their counterpart in the unliganded single active site model (1.271 in Model 1; Table 2). In addition, the zinc ions in Model 3 also have smaller condensed Fukui indices f + Zn (0.344 and 0.307, respectively) than Model 1 (0.498), indicating that the paired active site environment is better at attuning Zn’s Lewis acidity by maintaining its net charge. It is conceivable that the more positively charged zinc in the paired active sites would make the intermediate (probably a negatively charged ene-ol) more favorable, and so may increase the rate of the reaction. On the other hand, loss of the coupling between the paired active site by means of the D61A mutation leads to an enzyme that is still active, and has no half-site effect, but is less active overall (i.e. D61A mutant reduces enzyme activity to 6% of wild-type).
The QM calculation of the paired active sites strongly support a model where D61, linking by a network of hydrogen bonds involving water molecules in the solvent channel and active sites, the active site H64 and Q175, tunes the behavior of the zinc ions, such that only one zinc can support a pentahedral or octahedral geometry. Consequently, the enzyme elegantly restricts activity to one of these two active sites at a time. These observations explain the negative cooperativity observed in the chimeric mutants (Fig. 1b). The QM calculations are consistent with the significantly reduced rate in the E68Q mutant, which showed a mixture of product and substrate in the active site. This mutant appears to have engaged one substrate productively, and one non-productively, in each pair of active sites. In the crystal, these are averaged over all of the available enzymes.
Global hydrogen bond analysis indicates a preference for binding substrate molecules on opposite sides of the GmhA tetramer
The QM calculations clearly explain the basis for negative cooperativity in GmhA. However, they cannot explain the positive cooperativity observed. The two pairs of active sites with positive cooperative effect are too far apart to construct a QM model of both pairs. Therefore, we instead considered the global hydrogen bonding network of the enzyme upon substrate binding, expecting that cooperative binding events would alter this network. The global hydrogen bonding network of GmhA is surprisingly delicate. The main hydrogen bonding network (Fig. 4a, red)29 loses integrity and breaks into a series of smaller rigid elements when hydrogen bonds that are only 1.87 ± 0.04 kcal/mol or weaker are broken (average of ten simulations; cf. WcbL, the next enzyme in the pathway, where the main network is stable until the loss of hydrogen bonds 4.1 kcal/mol or weaker30; Table 3; Fig. 4; Supplementary Fig. 7). The GmhA network shows a trend to lose stability when one substrate binds to GmhA (~0.1 kcal/mol; not significant [ANOVA test between all pairs of structures tested]). When a second substrate binds on the same face of the GmhA tetramer (Fig. 4b), there is a further small loss in the stability of the network (~0.1 kcal/mol; P < 0.01 compared to unliganded), consistent with negative cooperativity. In contrast, when the second substrate molecule binds on the opposite face of the GmhA tetramer (Fig. 4c), there is a clear gain in the stability of the hydrogen bonding network (~0.3 kcal/mol; P < 0.001 compared to the single substrate bound), as expected for positive cooperativity. Figure 4 and Supplementary Fig. 7 also illustrate that GmhA is dominated by a single integrated hydrogen bonding cluster with limited relative motions (shown in red in Fig. 4 and Supplementary Fig. 7), which stays intact upon substrate binding at different active sites. Both positive and negative cooperativities of GmhA are associated with truly global changes in the hydrogen bonding network, which involves very small increase and decrease of many hydrogen bonds’ energies.
Modeling of the global hydrogen bond network of GmhA. The global hydrogen bonding network was determined using Proflex29. Images show the distribution of the protein structure into units that form a rigid hydrogen bonding network at 1.8 kcal/mol (just before the main network of unliganded GmhA loses integrity), in a typical case for each ligand state. Each independent unit is indicated by a different color, with the major unit shown in red. Colors correspond to the detailed data shown in Supplementary Fig. 7. (a) Global hydrogen bonding network of unliganded GmhA. (b) Schematic of the GmhA active sites. The active sites shown by the yellow/green and red/blue active sites are paired to one another through a water filled channel (cf. Fig. 2e). The green/blue and yellow/red active sites are located on the same face of the GmhA tetramer; ligand binding at both of these sites leads to a loss of structural stability (c) where the GmhA hydrogen bonding network loses integrity at an energy 0.25 kcal/mol lower than wild-type. The green/red and yellow/blue active sites are unpaired, and located on opposite faces of the tetramer; ligand binding at both of these sites (d) leads to an increase in stability of the major hydrogen bonding network of 0.2 kcal/mol compared to wild-type.
These data are consistent with both the positive cooperativity and negative cooperativity demonstrated by the quantum mechanical calculations: they suggest a model in which binding of substrate at one active site deters binding at either of the neighboring active sites, but promotes binding at the non-neighboring active site. The coupled paired active site is deterred by the zinc ion in this active site strongly preferring the tetrahedral coordination; whilst the other neighboring active site is deterred by the unfavorable effects on the global hydrogen bonding network. In contrast, both of these effects will favor binding at the non-neighboring active site, as the global hydrogen bond network shows a substantial improvement (releasing energy for binding), and the coupling of the active sites will favor binding of a substrate molecule to the zinc ready for catalysis. As GmhA is a slow enzyme (with a turnover number of less than 1 s−1), there is likely to be significant binding and release of substrate before a catalytic event takes place. The H-bond modeling observations therefore strongly support the biochemical observation of positive cooperativity with a Hill coefficient of 1.5–2, supporting a robust cooperativity between non-neighboring active sites. The data therefore suggest a model whereby alternating pairs of active sites on opposite sides of the molecule will engage with substrate and form a productive enzyme-substrate complex. The other pairs of active sites will not productively engage substrate, but instead provide catalytic power through the coupling of the active sites that exceeds the loss of activity from the non-use of these active sites. This enzyme therefore employs an elegant mixture of positive and negative cooperativity to tune its catalysis using subtle alterations to its hydrogen bonding network.
Conclusions and future prospects
Here, we show that GmhA is a half-site enzyme with positive homotropic cooperativity. The enzyme achieves this through an intricate network of hydrogen bonds and coupling of the active sites controlled by a unique water channel, exploiting the three dimensional structure of the protein to maximize its catalytic power and control. Our studies of GmhA provide a new mechanistic framework for positive and negative cooperativity, which may be available to many multimeric enzymes. We expect that further biochemical and modelling studies will reveal that these effects have evolved in many enzyme families. More generally, it is increasingly recognized that understanding subtle dynamical changes of protein structures can be the key to design powerful inhibitors. The subtleties by which GmhA regulates its substrate binding could be used to guide the design of highly selective inhibitors for multimeric enzymes.
Online methods
Preparation of GmhA, WcbL and WcbN
Full length sedoheptulose-7-phosphate isomerase (GmhA; Fig. 1), d,d-heptose-7-phosphate 1-kinase (WcbL) and d,d-heptose-1,7-bisphosphate 7-phosphatase (WcbN) from B. pseudomallei strain K96423 (genomic DNA a gift of R. Titball, University of Exeter) were prepared as previously described20. Mutants of GmhA were prepared using the QuikChange Lightning kit (Agilent), and confirmed by sequencing. Hybrids of E115K and D98N were prepared by subcloning the D98N mutant into the pCDF-Duet vector (Novagen), using the NcoI and HindIII sites (NcoI covers the start codon of GmhA in the cloned protein; the HindIII site is provided by pNIC28-Bsa4, after the stop codon). pNIC28-GmhA E115K and pCDF-Duet-GmhA D98N were transformed into Rosetta (DE3) cells (Merck), and grown in ZYM-5052 media31 supplemented with 100 μg/mL kanamycin, 25 μg/mL spectinomycin, and 10 μg/mL chloramphenicol. Cells were grown, harvested, lysed and initially purified as described for wild-type GmhA20. For preparation of hybrid GmhA, the size exclusion column was eluted isocratically with 10 mM Tris pH 8.0, 50 mM NaCl (buffer A). The hybrid proteins were separated using a 1 mL HiTrap Q HP column. The column was equilibrated in buffer A, and the protein eluted using a gradient to 288 mM NaCl over 50 mL. Pooled fractions were dialysed twice against a 50-fold excess of 10 mM Hepes pH 7.0, 0.5 M NaCl (buffer B). GmhA for enzyme assays was concentrated as necessary using a Vivaspin centrifugal concentrator (Vivascience), and stored at −20 °C with 20% (v/v) glycerol added.
Structure Determination of GmhA
All crystals were grown using the microbatch method, and were prepared using an Oryx6 crystallization robot (Douglas Instruments). Tag-removed GmhA mutants at 10 mg/mL were mixed with an equal volume of crystallization solutions, and crystals were grown at 4 °C. Prior to flash freezing, crystals were soaked in cryoprotectant solutions containing S7P (Supplementary Table 1). X-ray diffraction data sets were collected at 100 K at beamlines I02 and I03 of the Diamond synchrotron. Single wavelength datasets were collected for all crystals (Supplementary Table 1). To determine the identity of the binding metal, an EXAFS scan was performed. An energy of 20 keV was used for the EXAFS scan. Data were processed using Xia2 version 0.3.832, XDS33 and Aimless34. Model building and refinement of the structures was performed using Coot version 0.835, Refmac version 5.8 and PHENIX version 1.936. Structures were validated using PHENIX, Coot, Rampage37 and MolProbity38. Structural images were prepared using the PyMOL molecular graphics system (DeLano Scientific).
GmhA Enzyme Activity Assay
GmhA activity was monitored by coupling product formation to WcbL and WcbN and monitoring Pi release, in an analogous manner to the methods of DeLeon et al.17. Briefly, a reaction mixture was formed consisting of 20 mM HEPES, pH 8.0, 10 mM MgCl2, 10 mM KCl, 30 μg/mL WcbL, 40 μg/mL WcbN, and 25–50 μg/mL GmhA in a total volume of 50 μL. Reactions were initiated with 50 μL of ATP at 1 mM final concentration and S7P (Carbosynth) for final concentrations ranging from 0 to 1 mM (all concentrations given in the final 100 μL mixture). Samples were incubated at 37 °C for 10 min, and the reaction was terminated by heating to 70 °C for 5 minutes. The phosphate concentration was determined by the addition of 17 μL of Pi Colorlock Gold (Innova Biosciences) to 68 μL of reaction product. After 5 minutes, 6.8 μL of stabilization reagent was added to each sample. The absorbance at 635 nm was then determined using a Tecan M200 Infinite plate reader. The rate of GmhA was determined by comparison to a phosphate standard curve ranging from 0–70 μM phosphate, and by subtracting the background rate from negative controls containing no GmhA. All reactions were performed in triplicate, and a total of eight substrate concentrations were tested for each sample. The kinetic parameters of each GmhA preparation were determined by fitting the data to Equation 1, which describes a cooperative model, or the Michaelis-Menten equation (equation 2), using GraphPad Prism version 6.0.2 (GraphPad Software, La Jolla, CA). Equations including a product release term were tested: these did not alter the kinetic parameters, and were rejected according to the Akaike Information Criteria.
The co-ordinates and structure factors for the structures described in this paper have been submitted to the Protein Data Bank with accession numbers 5LU7, 5LU6, 5LU5 and 5LTZ for the D61A, H64Q, E68Q and Q175E structures respectively.
Computational studies
Global hydrogen bond analysis
Samples were prepared for computational analysis by setting all residues with alternate conformations to the most favored conformation using PHENIX. Structure with S7P molecules in defined locations were prepared by adding S7P molecules as appropriate from the Q175E structure to the wild-type structure (PDB ID: 2XBL). Explicit hydrogens were added to the structure, and the structure optimized, using the online version of YASARA39. Ten variants of each structure were produced by adding random shifts with an average of 0.058 Å to the heavy atoms using PDBSET40, and adding hydrogens using YASARA. Hydrogen bonding network analysis was performed using Proflex29. Hydrogen bond dilution was performed using default settings. The strength of the hydrogen bonding network was determined automatically using HETHER41. HETHER aberrantly assessed approximately one-quarter of the networks with GmhA added to active sites A and B; these replicates were removed and replaced with additional replicates.
Quantum mechanical calculations
A total of five model systems were set up. Model 1 and Model 2 are single active site models. Model 1 contains the zinc and the coordinating H64, E68, Q175 and H183 (unliganded). Model 2 is Model 1 with addition of the substrate S7P (substrate-bound). Models 3, 4 and 5 are all paired active site models, in which D61 from the two subunits (labelled as Sub_A and Sub_B) and a water molecule link the paired active sites. Specifically, Model 3 contains two unliganded paired active sites; Model 4 contains one unliganded active site and one substrate-bound active site S7P, while Model 5 includes two substrate-bound paired active. In addition, two water molecules are incorporated into Model 5 (labelled as Model 5water) to mimic water molecule or the sidechain of S58, which are within hydrogen bonding distances to both D61 and Q175 during our preliminary molecular dynamics calculations. The initial structures of these models were taken from the apo enzyme (PDB ID: 2X3Y) and the Q175E mutant. Only the sidechains of the active site residues and the aldehyde and ketone moiety at position 1 and 2 of S7P were kept in the models. The methyl groups (−CH3) of the sidechains of active site residues were fixed during QM optimisation, so that the residues didn’t move too far away from their positions in the crystal structures. The models were optimized at M05 2X/6–31 + G* level, using program G0942 to local minima and verified by frequency calculations. M05 2X level has been shown to be able to model the geometry and binding energy of zinc complexes well43,44. Zinc’s electron accepting ability (Lewis acidity) was estimated by the condensed Fukui indices f + zn
where q zn(n) and q zn(n + 1) represent, respectively, zinc’s charge in the model system (containing n electrons) and its charge upon adding one electron (n + 1) to the model systems (one Zn2+ in Model 1) and two electrons (n + 2) (two Zn2+ in Model 3)45,46. The natural population analysis was used to calculate the charge of zinc ions at the M05 2X/6–31 + G* level.
Data Availability
The research materials supporting this publication can be accessed by contacting the corresponding author.
References
Cui, Q. & Karplus, M. Allostery and cooperativity revisited. Protein Sci 17, 1295–307 (2008).
Hunter, C. A. & Anderson, H. L. What is cooperativity? Angew Chem Int Ed Engl 48, 7488–99 (2009).
Levitzki, A. & Koshland, D. E. Jr. Negative cooperativity in regulatory enzymes. Proc Natl Acad Sci USA 62, 1121–8 (1969).
Koshland, D. E. Jr. The structural basis of negative cooperativity: receptors and enzymes. Curr Opin Struct Biol 6, 757–61 (1996).
Michel, A. D. et al. Direct labelling of the human P2X7 receptor and identification of positive and negative cooperativity of binding. Br J Pharmacol 151, 103–14 (2007).
Ferrell, J. E. Jr. Q. & A: Cooperativity. J Biol 8, 53 (2009).
Urizar, E. et al. Glycoprotein hormone receptors: link between receptor homodimerization and negative cooperativity. EMBO J 24, 1954–64 (2005).
Cook, R. A. & Koshland, D. E. Jr. Positive and negative cooperativity in yeast glyceraldehyde 3-phosphate dehydrogenase. Biochemistry 9, 3337–42 (1970).
Stefan, M. I. & Le Novere, N. Cooperative binding. PLoS Comput Biol 9, e1003106 (2013).
Ferrari, M. E., Fang, J. & Lohman, T. M. A mutation in E. coli SSB protein (W54S) alters intra-tetramer negative cooperativity and inter-tetramer positive cooperativity for single-stranded DNA binding. Biophys Chem 64, 235–51 (1997).
Biemann, H. P. & Koshland, D. E. Jr. Aspartate receptors of Escherichia coli and Salmonella typhimurium bind ligand with negative and half-of-the-sites cooperativity. Biochemistry 33, 629–34 (1994).
Bloom, C. R., Kaarsholm, N. C., Ha, J. & Dunn, M. F. Half-site reactivity, negative cooperativity, and positive cooperativity: quantitative considerations of a plausible model. Biochemistry 36, 12759–65 (1997).
Wu, P. et al. Catalytic mechanism of 4-oxalocrotonate tautomerase: significances of protein-protein interactions on proton transfer pathways. J Phys Chem B 116, 6889–97 (2012).
Bateman, A. The SIS domain: a phosphosugar-binding domain. Trends Biochem Sci 24, 94–5 (1999).
Gourlay, L. J. et al. Probing the active site of the sugar isomerase domain from E. coli arabinose-5-phosphate isomerase via X-ray crystallography. Protein Sci 19, 2430–9 (2010).
Valvano, M. A., Messner, P. & Kosma, P. Novel pathways for biosynthesis of nucleotide-activated glycero-manno-heptose precursors of bacterial glycoproteins and cell surface polysaccharides. Microbiology 148, 1979–89 (2002).
De Leon, G. P., Elowe, N. H., Koteva, K. P., Valvano, M. A. & Wright, G. D. An in vitro screen of bacterial lipopolysaccharide biosynthetic enzymes identifies an inhibitor of ADP-heptose biosynthesis. Chem Biol 13, 437–41 (2006).
Durka, M. et al. Systematic synthesis of inhibitors of the two first enzymes of the bacterial heptose biosynthetic pathway: towards antivirulence molecules targeting lipopolysaccharide biosynthesis. Chemistry 17, 11305–13 (2011).
Taylor, P. L. & Wright, G. D. Novel approaches to discovery of antibacterial agents. Anim Health Res Rev 9, 237–46 (2008).
Harmer, N. J. The structure of sedoheptulose-7-phosphate isomerase from Burkholderia pseudomallei reveals a zinc binding site at the heart of the active site. J Mol Biol 400, 379–92 (2010).
Seetharaman, J. et al. Crystal structures of two putative phosphoheptose isomerases. Proteins 63, 1092–6 (2006).
Taylor, P. L. et al. Structure and function of sedoheptulose-7-phosphate isomerase, a critical enzyme for lipopolysaccharide biosynthesis and a target for antibiotic adjuvants. J Biol Chem 283, 2835–45 (2008).
Do, H. et al. Crystal Structure and Comparative Sequence Analysis of GmhA from Colwellia psychrerythraea Strain 34H Provides Insight into Functional Similarity with DiaA. Mol Cells 38, 1086–95 (2015).
Wierzbicki, I. H., Zielke, R. A., Korotkov, K. V. & Sikora, A. E. Functional and structural studies on the Neisseria gonorrhoeae GmhA, the first enzyme in the glycero-manno-heptose biosynthesis pathways, demonstrate a critical role in lipooligosaccharide synthesis and gonococcal viability. Microbiologyopen 6 (2017).
Finn, R. D. et al. The Pfam protein families database: towards a more sustainable future. Nucleic Acids Res 44, D279–85 (2016).
Nakaishi, Y. et al. Structural analysis of human glutamine:fructose-6-phosphate amidotransferase, a key regulator in type 2 diabetes. FEBS Lett 583, 163–7 (2009).
Raczynska, J. et al. The crystal and solution studies of glucosamine-6-phosphate synthase from Candida albicans. J Mol Biol 372, 672–88 (2007).
Teplyakov, A., Obmolova, G., Badet-Denisot, M. A., Badet, B. & Polikarpov, I. Involvement of the C terminus in intramolecular nitrogen channeling in glucosamine 6-phosphate synthase: evidence from a 1.6 A crystal structure of the isomerase domain. Structure 6, 1047–55 (1998).
Jacobs, D. J., Rader, A. J., Kuhn, L. A. & Thorpe, M. F. Protein flexibility predictions using graph theory. Proteins 44, 150–65 (2001).
Vivoli, M. et al. Unraveling the B. pseudomallei Heptokinase WcbL: From Structure to Drug Discovery. Chem Biol 22, 1622–32 (2015).
Studier, F. W. Protein production by auto-induction in high density shaking cultures. Protein Expr Purif 41, 207–34 (2005).
Winter, G., Lobley, C. M. & Prince, S. M. Decision making inxia2. Acta Crystallogr D Biol Crystallogr 69, 1260–73 (2013).
Kabsch, W. Xds. Acta Crystallogr D Biol Crystallogr 66, 125–32 (2010).
Evans, P. R. & Murshudov, G. N. How good are my data and what is the resolution? Acta Crystallogr D Biol Crystallogr 69, 1204–14 (2013).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr D Biol Crystallogr 66, 486–501 (2010).
Adams, P. D. et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr D Biol Crystallogr 66, 213–21 (2010).
Lovell, S. C. et al. Structure validation by Calpha geometry: phi,psi and Cbeta deviation. Proteins 50, 437–50 (2003).
Davis, I. W. et al. MolProbity: all-atom contacts and structure validation for proteins and nucleic acids. Nucleic Acids Res 35, W375–83 (2007).
Krieger, E. & Vriend, G. YASARA View - molecular graphics for all devices - from smartphones to workstations. Bioinformatics 30, 2981–2 (2014).
Winn, M. D. et al. Overview of the CCP4 suite and current developments. Acta Crystallogr D Biol Crystallogr 67, 235–42 (2011).
Raschka, S., Bemister-Buffington, J. & Kuhn, L. A. Detecting the native ligand orientation by interfacial rigidity: SiteInterlock. Proteins 84, 1888–1901 (2016).
Frisch, M. J. et al. Gaussian 09. (Gaussian, Inc., Wallingford, CT, USA, 2009).
Sorkin, A., Truhlar, D. G. & Amin, E. A. Energies, Geometries, and Charge Distributions of Zn Molecules, Clusters, and Biocenters from Coupled Cluster, Density Functional, and Neglect of Diatomic Differential Overlap Models. J Chem Theory Comput 5, 1254–65 (2009).
Zhao, Y., Schultz, N. E. & Truhlar, D. G. Design of Density Functionals by Combining the Method of Constraint Satisfaction with Parametrization for Thermochemistry, Thermochemical Kinetics, and Noncovalent Interactions. J Chem Theory Comput 2, 364–82 (2006).
Lee, Y. M. & Lim, C. Physical basis of structural and catalytic Zn-binding sites in proteins. J Mol Biol 379, 545–53 (2008).
Yang, W. & Parr, R. G. Hardness, softness, and the fukui function in the electronic theory of metals and catalysis. Proc Natl Acad Sci USA 82, 6723–6 (1985).
Acknowledgements
The authors thank Rosanna Langley (University of Exeter) for assistance in construction of the plasmids for chimeric GmhA; Misha Isupov (University of Exeter) for advice on structure solution; the staff at Diamond beamline I02 for their assistance with data collection; Stephen Wells (University of Bath) and Leslie Kuhn (University of Michigan) for discussions regarding the bioinformatics approaches. JP would like to acknowledge computational power provided by the UK National Service for Computational Chemistry Software (NSCCS) and the UK High-End Computing Consortium for Biomolecular Simulation (HECBioSim). This work was funded by grants from the Royal Society (2009/R2) and BBSRC (BB/H019685/1) to NH.
Author information
Authors and Affiliations
Contributions
M.V., J.P. and N.J.H. performed experimental and computational work; J.P. and N.J.H. conceived the approach; M.V., J.P. and N.J.H. wrote the manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Vivoli, M., Pang, J. & Harmer, N.J. A half-site multimeric enzyme achieves its cooperativity without conformational changes. Sci Rep 7, 16529 (2017). https://doi.org/10.1038/s41598-017-16421-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-16421-2
- Springer Nature Limited
This article is cited by
-
Understanding the cooperative effects in the catalysis of homodimeric fluoroacetate dehalogenase
Science China Chemistry (2024)
-
Structural and functional characterization of M. tuberculosis sedoheptulose- 7-phosphate isomerase, a critical enzyme involved in lipopolysaccharide biosynthetic pathway
Scientific Reports (2020)
-
Proximity-induced caspase-9 activation on a DNA origami-based synthetic apoptosome
Nature Catalysis (2020)
-
Insight into natural inhibitors and bridging docking to dynamic simulation against sugar Isomerase (SIS) domain protein
Journal of Molecular Modeling (2020)