Abstract
While great progress has been witnessed in unlocking the potential of new battery materials in the laboratory, further stepping into materials and components manufacturing requires us to identify and tackle scientific challenges from very different viewpoints. It is not uncommon that practical considerations prove insurmountable after scientists make promising discoveries in the laboratory. Herein, we discuss the knowledge gap between materials research and cost-effective materials scale-up for further industry manufacturing. From a few grams of materials synthesis in the laboratory to kilograms and tons of mass production, there are many blind spots in terms of yields, impurities and quality control in which materials science can play a key role but is overlooked. With a focus on next-generation lithium ion and lithium metal batteries, we briefly review challenges and opportunities in scaling up lithium-based battery materials and components to accelerate future low-cost battery manufacturing.
Similar content being viewed by others
References
Nitta, N., Wu, F., Lee, J. T. & Yushin, G. Li ion battery materials: present and future. Mater. Today 18, 252–264 (2015).
Liu, J. et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat. Energy 4, 180–186 (2019).
National Blueprint for Lithium Batteries 2021–2030 (DOE, 2021).
Sun, H. H. et al. Transition metal-doped Ni-rich layered cathode materials for durable Li ion batteries. Nat. Commun. 12, 6552 (2021).
Zuo, X., Zhu, J., Müller-Buschbaum, P. & Cheng, Y.-J. Silicon based lithium ion battery anodes: a chronicle perspective review. Nano Energy 31, 113–143 (2017).
Zhang, J.-G., Xu, W., Xiao, J., Cao, X. & Liu, J. Lithium metal anodes with nonaqueous electrolytes. Chem. Rev. 120, 13312–13348 (2020).
Kwade, A. et al. Current status and challenges for automotive battery production technologies. Nat. Energy 3, 290–300 (2018). This paper summarizes the state-of-the-art Li ion battery production process from electrode and cell production to module and pack assembly.
Duffner, F. et al. Post-lithium-ion battery cell production and its compatibility with lithium ion cell production infrastructure. Nat. Energy 6, 123–134 (2021). This article discusses cell production of post-lithium-ion batteries by examining the industrial-scale manufacturing of Li ion batteries, sodium ion batteries, lithium sulfur batteries, lithium air batteries and solid-state batteries.
Schmuch, R., Wagner, R., Hörpel, G., Placke, T. & Winter, M. Performance and cost of materials for lithium-based rechargeable automotive batteries. Nat. Energy 3, 267–278 (2018).
Wentker, M., Greenwood, M. & Leker, J. A bottom-up approach to lithium-ion battery cost modeling with a focus on cathode active materials. Energies 12, 504 (2019).
Li, H. et al. Synthesis of single crystal LiNi0.88Co0.09Al0.03O2 with a two-step lithiation method. J. Electrochem. Soc. 166, A1956 (2019).
Jung, R. et al. Effect of ambient storage on the degradation of Ni-rich positive electrode materials (NMC811) for Li-ion batteries. J. Electrochem. Soc. 165, A132 (2018).
Faenza, N. V. et al. Editors’ Choice—Growth of ambient induced surface impurity species on layered positive electrode materials and impact on electrochemical performance. J. Electrochem. Soc. 164, A3727 (2017).
Zhai, Y. et al. Improving the cycling and air-storage stability of LiNi0.8Co0.1Mn0.1O2 through integrated surface/interface/doping engineering. J. Mater. Chem. A 8, 5234–5245 (2020).
Carlson, C. Meeting Nickel Demand for Lithium-Ion Batteries Will Be a Challenge https://feeco.com/meeting-nickel-demand-for-lithium-ion-batteries-will-be-a-challenge/ (FEECO, 2023).
S&P Global Nickel pig ion–matte conversion could be a game changer for the battery industry. Commodity Insights https://www.spglobal.com/commodityinsights/en/market-insights/podcasts/platts-future-energy/041321-nickel-battery-tsingshan-ev-pig-iron-matte-energy-transition (2021).
Ma, X. et al. Recycled cathode materials enabled superior performance for lithium-ion batteries. Joule 5, 2955–2970 (2021).
Malik, M., Chan, K. H. & Azimi, G. Review on the synthesis of LiNixMnyCo1−x−yO2 (NMC) cathodes for lithium-ion batteries. Mater. Today Energy 28, 101066 (2022).
Zheng, L., Bennett, J. C. & Obrovac, M. N. All-dry synthesis of single crystal NMC cathode materials for Li-ion batteries. J. Electrochem. Soc. 167, 130536 (2020).
Noritake Roller Hearth Kiln https://www.noritake.co.jp/eng/products/eeg/subs/detail/127/ (2022).
Lv, D. et al. High energy density lithium–sulfur batteries: challenges of thick sulfur cathodes. Adv. Energy Mater. 5, 1402290 (2015).
Xiao, J. Understanding the lithium sulfur battery system at relevant scales. Adv. Energy Mater. 5, 1501102 (2015).
Shi, L. et al. Reaction heterogeneity in practical high-energy lithium–sulfur pouch cells. Energy Environ. Sci. 13, 3620–3632 (2020).
Chen, S. et al. High-efficiency lithium metal batteries with fire-retardant electrolytes. Joule 2, 1548–1558 (2018).
Xiao, J. et al. Perspective—Electrochemistry in understanding and designing electrochemical energy storage systems. J. Electrochem. Soc. 169, 010524 (2022). This article discusses the designing principles of industry-relevant pouch cells and cylindrical cells for EV and grid energy storage application.
Niu, C. et al. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries. Nat. Energy 6, 723–732 (2021).
Bi, Y., Li, Q., Yi, R. & Xiao, J. To pave the way for large-scale electrode processing of moisture-sensitive Ni-rich cathodes. J. Electrochem. Soc. 169, 020521 (2022).
Ross, G. J., Watts, J. F., Hill, M. P. & Morrissey, P. Surface modification of poly(vinylidene fluoride) by alkaline treatment. Degrad. Mech. Polym. 41, 1685–1696 (2000).
Cho, D.-H. et al. Effect of residual lithium compounds on layer Ni-rich Li[Ni0.7Mn0.3]O2. J. Electrochem. Soc. 161, A920 (2014).
Xiao, J. Scaling Up of High-Performance Single Crystalline Ni-Rich Cathode Materials Annual merit review meeting (US Department of Energy Vehicle Technology Office, 2022).
Liu, H., Yang, Y. & Zhang, J. Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium ion batteries. J. Power Sources 162, 644–650 (2006). This article studies the storage issue of LiNi0.8Co0.2O2 with the findings generally applicable in all Ni-rich cathodes.
Jin, L. et al. Pre-lithiation strategies for next-generation practical lithium-ion batteries. Adv. Sci. 8, 2005031 (2021). This review article surveys different prelithiation approaches for Li ion batteries.
Obrovac, M. N. & Chevrier, V. L. Alloy negative electrodes for Li-ion batteries. Chem. Rev. 114, 11444–11502 (2014).
Krause, L. J., Brandt, T., Chevrier, V. L. & Jensen, L. D. Surface area increase of silicon alloys in Li-ion full cells measured by isothermal heat flow calorimetry. J. Electrochem. Soc. 164, A2277 (2017).
Du, A. et al. Recent research progress of silicon-based anode materials for lithium-ion batteries. ChemistrySelect 7, e202201269 (2022).
Chae, S. et al. A micrometer-sized silicon/carbon composite anode synthesized by impregnation of petroleum pitch in nanoporous silicon. Adv. Mater. 33, 2103095 (2021).
Reynier, Y. et al. Practical implementation of Li doped SiO in high energy density 21700 cell. J. Power Sources 450, 227699 (2020).
Eshetu, G. G. et al. Production of high-energy Li ion batteries comprising silicon-containing anodes and insertion-type cathodes. Nat. Commun. 12, 5459 (2021).
Vidal, D. et al. Si–C/G based anode swelling and porosity evolution in 18650 casing and in pouch cell. J. Power Sources 514, 230552 (2021).
Berhaut, C. L. et al. Prelithiation of silicon/graphite composite anodes: benefits and mechanisms for long-lasting Li-ion batteries. Energy Storage Mater. 29, 190–197 (2020).
Sato, Y. Electrowinning of metallic lithium from molten salts. ECS Proc. Vol. 2002-19, 771–778 (2002).
Zhang, X., Han, A. & Yang, Y. Review on the production of high-purity lithium metal. J. Mater. Chem. A 8, 22455–22466 (2020).
Shi, F. et al. Strong texturing of lithium metal in batteries. Proc. Natl Acad. Sci. USA 114, 12138–12143 (2017).
Schulz, S. C. Sputtering of lithium. US patent US6,039,850A (1995).
Bates, J. B., Dudney, N. J., Neudecker, B., Ueda, A. & Evans, C. D. Thin-film lithium and lithium ion batteries. Solid State Ion. 135, 33–45 (2000).
Kurt J. Lesker Company. Lithium (Li) Pieces Evaporation Materials https://www.lesker.com/newweb/deposition_materials/depositionmaterials_evaporationmaterials_1.cfm?pgid=li1 (2023).
Porthault, H. & Decaux, C. Electrodeposition of lithium metal thin films and its application in all-solid-state microbatteries. Electrochim. Acta 194, 330–337 (2016).
Xiao, J. How lithium dendrites form in liquid batteries. Science 366, 426–427 (2019).
Shi, F. et al. Lithium metal stripping beneath the solid electrolyte interphase. Proc. Natl Acad. Sci. USA 115, 8529–8534 (2018).
Zhao, J. et al. Surface fluorination of reactive battery anode materials for enhanced stability. J. Am. Chem. Soc. 139, 11550–11558 (2017).
Ye, Y. et al. Ultralight and fire-extinguishing current collectors for high-energy and high-safety lithium ion batteries. Nat. Energy 5, 786–793 (2020).
Niu, C. et al. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles. Nat. Energy 4, 551–559 (2019).
Alvarez, S. Redwood Materials Shares Plans to Ramp Copper Foil Production to 100 GWh https://www.teslarati.com/tesla-battery-recycling-redwood-materials-100-gwh-goal/ (TESLARATI, 2022).
Xiao, J., Liu, J., Lee, H., Liu, D. & Niu, C. Lithium metal pouch cells and methods of making the same. US patent US20200274148A1 (2020).
Niu, C. et al. Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions. Nat. Nanotechnol. 14, 594–601 (2019).
Zhu, P. et al. A review of current collectors for lithium ion batteries. J. Power Sources 485, 229321 (2021).
Cho, J.-H., Li, X. & Picraux, S. T. The effect of metal silicide formation on silicon nanowire-based lithium ion battery anode capacity. J. Power Sources 205, 467–473 (2012).
Tan, D. H. S., Banerjee, A., Chen, Z. & Meng, Y. S. From nanoscale interface characterization to sustainable energy storage using all-solid-state batteries. Nat. Nanotechnol. 15, 170–180 (2020).
Wu, B. et al. Good practices for rechargeable lithium metal batteries. J. Electrochem. Soc. 166, A4141–A4149 (2019).
Patel, D., Robinson, J. B., Ball, S., Brett, D. J. L. & Shearing, P. R. Thermal runaway of a Li-ion battery studied by combined ARC and multi-length scale X-ray CT. J. Electrochem. Soc. 167, 090511 (2020).
Ruther, R. E. et al. Chemical evolution in silicon–graphite composite anodes investigated by vibrational spectroscopy. ACS Appl. Mater. Interfaces 10, 18641–18649 (2018).
Benavente, L. et al. FTIR mapping as a simple and powerful approach to study membrane coating and fouling. J. Membr. Sci. 520, 477–489 (2016).
Christian, M. J. & Alain, M. In situ Raman analyses of electrode materials for Li ion batteries. AIMS Mater. Sci. 5, 650–698 (2018).
Hollricher, K., Strom, D. & Schmidt, U. Looking into batteries with Raman correlative RISE microscopy studies of Li-ion cells. Imaging Microsc. 23, 14–15 (2021).
Degarmo, E., Black, J. and Kohser, R. Materials and Processes in Manufacturing 9th edn (Wiley, 2003).
Yang, L., Chen, H.-S., Song, W.-L. & Fang, D. Effect of defects on diffusion behaviors of lithium-ion battery electrodes: in situ optical observation and simulation. ACS Appl. Mater. Interfaces 10, 43623–43630 (2018).
Lu, Y. et al. Dry electrode technology, the rising star in solid-state battery industrialization. Matter 5, 876–898 (2022).
Deng, Z. et al. Ultrasonic scanning to observe wetting and ‘unwetting’ in Li-ion pouch cells. Joule 4, 2017–2029 (2020). This article discusses the application of non-destructive ultrasonic scanning approach to map wetted areas in lithium ion pouch cells.
Acknowledgements
This work is jointly supported by the Vehicle Technologies Office (VTO) and Advanced Manufacturing Office (AMO) of Energy Efficiency and Renewable Energy (EERE), US Department of Energy, through a joint programme under award number DE-LC-000L080. J.X. thanks VTO’s Advanced Battery Materials Research Program (Battery500 Consortium) for support. Discussion on silicon materials is supported by VTO’s Silicon Consortium Project. PNNL is operated by Battelle for the Department of Energy under contract DE-AC05-76RLO1830.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Energy thanks the anonymous reviewers for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xiao, J., Shi, F., Glossmann, T. et al. From laboratory innovations to materials manufacturing for lithium-based batteries. Nat Energy 8, 329–339 (2023). https://doi.org/10.1038/s41560-023-01221-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41560-023-01221-y
- Springer Nature Limited
This article is cited by
-
Re-evaluation of battery-grade lithium purity toward sustainable batteries
Nature Communications (2024)
-
Safe electrolyte for long-cycling alkali-ion batteries
Nature Sustainability (2024)
-
Proof of Aerobically Autoxidized Self-Charge Concept Based on Single Catechol-Enriched Carbon Cathode Material
Nano-Micro Letters (2024)
-
CH3COOLi-assisted lithium source on the synthesis of high-performance single-crystal Ni-rich cathode material
Ionics (2024)
-
Trimming the Degrees of Freedom via a K+ Flux Rectifier for Safe and Long-Life Potassium-Ion Batteries
Nano-Micro Letters (2023)