Abstract
To date, bending problems for strips or plates made of composite materials with curved structure have been investigated only in the linear statement. However, in many cases, the necessity arises to investigate the corresponding bending problems in the geometrically nonlinear statement. Therefore, in the present paper, some bending problems for a composite strip with a periodically curved structure is investigated in such a statement using the exact nonlinear equations of elasticity theory in Lagrangian coordinates. The numerical results are obtained by employing the FEM with the use of the Newton-Raphson and the Modified Newton-Raphson algorithms.
Similar content being viewed by others
REFERENCES
S. D. Akbarov and N. Yahnioglu, “Stress distribution in a strip fabricated from a composite material with small-scale structure,” Int. Appl. Mech., 684–690 (March, 1997).
S. D. Akbarov and N. Yahnioglu, “The influence of the local structural damage of the multilayered thick plate material to the stress distribution,” Int. Appl. Mech., 873–878 (March, 1999).
N. Yahnioglu, “Three-dimensional analysis of stress field in the plate fabricated from composite materials with small-scale structural curving,” Mech. Comp. Mater., 33, No. 3, 239–245 (1997).
S. D. Akbarov and A. N. Guz, “Continuum theory in the mechanics of composite materials with small-scale structural distortion,” Sov. Appl. Mech., 107–117 (August, 1991).
S. D. Akbarov, A. N. Guz, and N. Yahnioglu, “Mechanics of composite materials with curved structures and elements of constructions (review),” Int. Appl. Mech., 1067–1069 (May, 1999).
O. C. Zienkiewich and R. L. Taylor, The Finite Element Method, Vol. 1. Basic Formulation and Linear Problems, McGraw-Hill Book Company, London (1989).
O. C. Zienkiewich and R. L. Taylor, The Finite Element Method, Vol. 2. Solid and Fluid Mechanics Dynamics and Non-Linearity, McGraw-Hill Book Company, London (1991).
R. M. Christensen, Mechanics of Composite Materials, Krieger Publishing Company, Florida (1979).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yahnioglu, N., Selim, S. Bending of a Composite Material Strip with Curved Structure in the Geometrically Nonlinear Statement. Mechanics of Composite Materials 36, 459–464 (2000). https://doi.org/10.1023/A:1006702515478
Issue Date:
DOI: https://doi.org/10.1023/A:1006702515478