Abstract
A series of first-, second-, and third-generation dendronic triazolo-pyridazinones were synthesized in good yields via the CuI-catalyzed azide–alkyne cycloaddition reactions of 4,6-diphenyl-2-(prop-2-yn-1-yl)pyridazin-3(2H)-one, possessing a terminal alkyne functional group with aromatic mono- and diazides with long alkyl and chiral glycol side-chain substituents. The chemical structures of the new compounds were characterized using different spectroscopic methods. The morphology of the dendrons was examined using the scanning electron microscope (SEM) analysis, which revealed the formation of highly ordered nanofiber and nanorod aggregations, directed by π-stacking interactions and van der Waals forces.
Graphical abstract
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs40097-018-0262-9/MediaObjects/40097_2018_262_Figa_HTML.jpg)
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
Introduction
Molecular self-assembly (MSA) has been ubiquitous in supramolecular chemistry, material sciences, and nanoscience [1,2,3]. It describes the phenomenon in which smaller components come spontaneously and precisely together with the aid of noncovalent forces, such as hydrogen bonding [4], charge-transfer interactions in electron-rich π-donor and electron-deficient π-acceptor systems [5], aromatic π-stacking through molecular orbital overlapping [6], van der Waals forces, [7] or metal-ion interactions [8] to construct well-ordered aggregations and thereby create order out of disorder. As a consequence, the entropic barrier of the organized transition state of the MSA aggregations tends to decrease in comparison with the chaotic monomeric species. The microscopic analysis outcome of the MSA is usually visualized as aggregations of nanofibers [9], nanorods, [10] nanotubes [11], or nanospheres [12]. MSA has been commonly observed in nature, for instance, in the formation of the various intriguing biomolecules, such as the DNA nucleobases, proteins, viruses, and lipid bilayers [13,14,15,16]. A growing interest has been dedicated over the past decades to two-dimensional (2D) self-assembly of supramolecular architectures at solid surfaces due to its impact for developing new nanomaterials [17]. The MSA of materials at solid–liquid surfaces is counterbalanced by many factors, such as the material concentration in the dispersion medium [18], change of pH, or metal complexation [19, 20], leading probably to alteration of the mode of assembly. Recently, MSA directed by hydrophobic–hydrophilic interactions has been given a widespread research interest due to its directionality and selectivity [21,22,23,24]. Inspired by our recent work on the self-assembly of dendrimers [19, 20, 25], we designed and prepared a series of first-, second-, and third-generation dendrons to investigate the roles of aromatic π-stacking interactions and the weak van der Waals forces in controlling the surface morphology of the self-organized materials.
Experiment
Materials and general methods
The microanalytical data were carried out on a Vario El-Mentar instrument, Microanalytical Center, Cairo University, Egypt. The 1H-NMR and 13C-NMR spectra were measured on a JEOL 300 MHz in DMSO-d6, Microanalytical Center, Cairo University, Egypt. The chemical shifts (δ) were expressed in ppm relative to the standard TMS as an internal reference. Mass spectra were measured on a 70 eV EI Ms-QP 1000 EX equipment (Shimadzu, Japan), Microanalytical Center, Cairo University, Egypt. The UPLC separations were performed using a Waters Alliance system (mixtures and gradient mixtures of acetonitrile/water, flow = 0.6 ml/min) equipped with 100 × 2.1 mm AQUITY HSST3 column (1.8 µm phenyl-hexyl material) and consisted of a Waters Separations Module 2695, a Waters Diode Array Detector 996, and a Waters Mass Detector ZQ 2000. Conditions are specified when describing the corresponding compounds. The signals have been detected using UV between 200 and 400 nm (MaxPlot). The SEM measurements were performed using a Quanta FEG 250 instrument, National Research Centre, Egypt.
General click chemistry procedure [26]
A three-necked flask was charged with alkyne 7 (1 equiv.), aryl azide 5, 8, 11, 13, 15, or 17 (1 equiv.), sodium ascorbate (0.3 equiv.), TBTA (0.15 equiv.), and a solvent mixture of H2O/tBuOH/CH2Cl2 (1/2/8, 60 ml). The flask was evacuated and flushed with argon repeatedly (three cycles). Thereafter, CuSO4·5H2O was added (0.15 equiv.) and the reaction mixture was stirred for 2 days at rt in the dark. After consumption of alkyne 7 as indicated by TLC monitoring, the mixture was diluted with CH2Cl2 and transferred into a separating funnel for extraction. The organic phase was separated and washed with an aqueous solution of ethylenediaminetetraacetic acid (EDTA) disodium salt (EDTA-Na2) (3×). The aqueous phase was extracted with CH2Cl2 (3×) and washed with a saturated aqueous solution of NaCl (60 ml volume). The organic phase was dried over anhydrous MgSO4 and filtered. The solvent was evaporated under vacuo and the target compound was obtained after purification with column chromatography.
1,2,3-Tris(hexadecyloxy)benzene 2
In a two-necked flask equipped with a condenser, pyrogallol 1 (1.0 g, 8 mmol, 1 equiv.), 1-bromohexadecane (7.33 g, 24 mmol, 3 equiv.), 18-crown-6 (0.31 g, 1.2 mmol, 0.15 equiv.), tetrabutylammonium iodide (0.44 g, 1.2 mmol, 0.15 equiv.), and K2CO3 (8.29 g, 60 mmol, 7.5 equiv.) were dissolved in 60 ml acetonitrile. The mixture was degassed at rt by evacuating under stirring, flushed with argon (3×), and refluxed overnight. After consumption of pyrogallol as indicated by TLC monitoring, the solution was transferred into a separating funnel and diluted with ethyl acetate (EA) for extraction. The organic phase was washed with a saturated aqueous solution of NaHCO3 (3×), water (3×), and brine. The organic phase was dried over anhydrous MgSO4, filtered, and the solvent was evaporated under vacuo to give the target compound after purification with column chromatography [petroleum ether (PE): EA 2:1]. Yield: 99%, 1H-NMR (300 MHz, CDCl3): δ (ppm) = 0.90 (t, 3J = 6.49 Hz, 9H, CH3), 1.23–1.49 (m, 78H, CH2), 1.74–1.87 (m, 6H, CH2), 3.95–4.0 (m, 6H, CH2), 6.57 (d, 3J = 8.34 Hz, 2H, ArH), and 6.92 (t, 3J = 8.33 Hz, 1H, ArH). 13C-NMR (75 MHz, CDCl3): δ (ppm) = 14.13 (CH3), 22.73 (CH2), 26.15 (CH2), 26.19 (CH2), 28.22 (CH2), 28.81 (CH2), 29.42 (CH2), 29.48 (CH2), 29.59 (CH2), 29.70 (CH2), 29.72 (CH2), 29.76 (CH2), 30.39 (CH2), 31.97 (CH2), 32.88 (CH2), 33.90 (CH2), 69.07 (OCH2), 73.36 (OCH2), 106.75 (CAr), 123.10 (CAr), 138.44 (CO), and 153.43 (CO). MS (EI, T = 37–50 °C): m/z = 800.31 (Calcd. 800.39 for [M+H+]). Elemental analysis, calcd. (%) for C54H102O3: C 81.13, H 12.86; found C 81.17, H 12.79.
1,2,3-Tris(hexadecyloxy)-5-nitrobenzene 3
1,2,3-Tris(hexadecyloxy)benzene 2 (0.5 g, 0.6 mmol, 1 equiv.) was dissolved in 15 ml CH2Cl2, and an aqueous solution of sodium nitrite was added (0.08 g, 1.25 mmol, 2 equiv.). The suspension was cooled to 0 °C, and 2 ml nitric acid 65% was added dropwise over the course 20 min. The mixture was stirred at rt for 3 h and 100 ml of PE was added. The organic layer was washed with a saturated solution of NaHCO3, brine, dried over anhydrous MgSO4, and filtered over a small pad of silica gel using CH2Cl2 as an eluent; the solvent was evaporated under vacuo and the residue was dried overnight using a vacuum pump. Yield: 71%, 1H-NMR (300 MHz, CDCl3): δ (ppm) = 0.90 (t, 3J = 6.50 Hz, 9H, CH3), 1.45–1.51 (m, 78H, CH2), 1.71–1.90 (m, 6H, CH2), 4.03–4.10 (m, 6H, OCH2), and 7.49 (s, 2H, ArH). 13C-NMR (75 MHz, CDCl3): δ (ppm) = 14.11 (CH3), 22.71 (CH2), 26.04 (CH2), 28.21 (CH2), 28.80 (CH2), 29.12 (CH2), 29.40 (CH2), 29.48 (CH2), 29.54 (CH2), 29.58 (CH2), 29.65 (CH2), 30.33 (CH2), 31.96 (CH2), 32.87 (CH2), 33.86 (CH2), 69.40 (OCH2), 73.76 (OCH2), 102.06 (CAr), 143.13 (NO2CAr), 143.77 (CO), and 152.69 (CO). MS (EI, T = 37–50 °C): m/z = 845.43 (Calcd. 845.39 for [M+H+]). Elemental analysis, calcd. (%) for C54H101NO5: C 76.81, H 12.06, N 1.66; found C 76.85, H 12.11, N 1.98.
3,4,5-Tris(hexadecyloxy)aniline 4
In a one-necked flask, 1,2,3-tris(hexadecyloxy)-5-nitrobenzene 3 (4.36 g, 5.17 mmol, 1 equiv.) was dissolved in 50 ml of methanol, 0.430 mg Pd/C was added, and the mixture was degassed at rt under vacuo and flushed with H2 (3x). After stirring overnight at 60 °C under an atmosphere of H2, the mixture was filtered through a Celite pad and the solvent was evaporated under vacuo. Yield: 91%, 1H-NMR (300 MHz, CDCl3): δ (ppm) = 0.90 (t, 3J = 6.49 Hz, 9H, CH3), 1.2–1.4 (m, 78H, CH2), 1.7–1.8 (m, 6H, CH2), 3.8–3.9 (m, 6H, OCH2), 4.13–4.18 (brs, 2H, NH2), and 5.99 (s, 2H, ArH). 13C-NMR (75 MHz, CDCl3): δ (ppm) = 14.13 (CH3), 22.71 (CH2), 26.12 (CH2), 26.21 (CH2), 29.40 (CH2), 29.44 (CH2), 29.68 (CH2), 29.74 (CH2), 30.32 (CH2), 31.95 (CH2), 68.97 (OCH2), 73.58 (OCH2), 94.56 (CAr), 131.19 (CO), 141.96 (NH2CAr), and 153.72 (CO). MS (EI, T = 37–50 °C): m/z = 815.48 (Calcd. 815.41 for [M+H+]). Elemental analysis, calcd. (%) for C54H103NO3: C 79.64, H 12.75, N 1.72; found C 79.69, H 12.71, N 1.78.
5-Azido-1,2,3-tris(hexadecyloxy)benzene 5
In a round-bottomed flask, 3,4,5-tris(hexadecyloxy)aniline 4 (2.48 g, 3 mmol, 1 equiv.) was dissolved in 10 ml of acetonitrile and cooled to 0 °C in an ice bath. To the stirred mixture was added t-BuONO (0.46 g, 4.5 mmol, 1.5 equiv.) followed by dropwise addition of TMSN3 (0.41 g, 3.6 mmol, 1.2 equiv.). The resulting solution was stirred at rt for 1 h. The reaction mixture was concentrated under vacuo, and the crude product was purified by silica gel chromatography using PE to give the product. 1H-NMR (300 MHz, CDCl3): δ (ppm) = 0.90 (t, 3J = 6.48 Hz, 9H, CH3), 1.28–1.49 (m, 78H, CH2), 1.72–1.84 (m, 6H, CH2), 3.90–3.98 (m, 6H, OCH2), and 6.23 (s, 2H, ArH). 13C-NMR (75 MHz, CDCl3): δ (ppm) = 14.13 (CH3), 22.72 (CH2), 26.07 (CH2), 26.14 (CH2), 29.30 (CH2), 29.40 (CH2), 29.66 (CH2), 29.74 (CH2), 29.76 (CH2), 30.30 (CH2), 31.95 (CH2), 69.15 (OCH2), 73.55 (OCH2), 97.65 (CAr), 134.97 (CO), 135.46 (N3CAr), and 153.92 (CO). MS (EI, T = 37–50 °C): m/z = 841.31 (Calcd. 841.41 for [M+H+]). Elemental analysis, calcd. (%) for C54H101N3O3: C 77.18, H 12.11, N 5.00; found C 77.25, H 12.06, N 5.04.
4,6-Diphenyl-2-(prop-2-ynyl)pyridazin-3(2H)-one 7
In a two-necked flask fitted with an efficient reflux condenser was dissolved 4,6-diphenylpyridazin-3(2H)-one 6 (10 mmol) in DMF (20 ml) followed by addition of Na2CO3 (30 mmol). The reaction mixture was heated to 50–60 °C for 30 min and then cooled to rt. Propargyl bromide 80% in toluene (20 mmol) was added. The reaction mixture was stirred at the same temperature and the reaction progress was monitored by TLC. After consumption of the starting material (about 4 h), the mixture was poured into ice water (100 ml) with stirring. The resulting solution was extracted with Et2O (100 ml) (3×). The combined organic extracts were washed with cold water (100 ml) (2×) and dried over anhydrous MgSO4. The organic solvent was evaporated under vacuo to give the title compound as a pale yellow material (94%). TLC (PE/EA 8/2) Rf = 0.39. 1H-NMR (300 MHz, DMSO-d6): δ (ppm) = 3.27 (s, 1H, C≡CH), 5.03 (s, 2H, CH2), 7.47–7.52 (m, 6H, ArH), 7.94–8.01 (m, 4H, ArH), and 8.15 (s, 1H, ArH). 13C-NMR (75 MHz, DMSO-d6): δ (ppm) = 38.68 (CH2), 75.24 (C≡CH), 78.46 (C≡CH), 126.02 (CAr), 127.32 (CAr), 128.03 (CAr), 128.73 (CAr), 128.87 (CAr), 129.34 (CAr), 129.40 (CAr), 133.65 (CAr), 134.36 (CAr), 138.63 (CAr), 144.23 (CAr), and 157.75 (CO). MS (EI, T = 37–50 °C): m/z = 287.34 (Calcd. 287.34 for [M+H+]). Elemental analysis, calcd. (%) for C19H14N2O: C 79.70, H 4.93, N 9.78; found C 79.75, H 4.88, N 9.84.
Dihexadecyl-5-(4-((6-oxo-3,5-diphenylpyridazin-1(6H)-yl)methyl)-1H-1,2,3-triazol-1-yl)isophthalate 9
The title compound was separated and purified by column chromatography (PE/EA, 7/3) as a white solid (89%). TLC (PE/EA, 7/3) Rf = 0.48. 1H-NMR (300 MHz, DMSO-d6): δ (ppm) = 0.82 (t, 3J = 6.55 Hz, 6H, CH3), 1.19–1.32 (m, 52H, CH2), 1.77–1.82 (m, 4H, CH2), 3.96 (t, 3J = 6.76 Hz, 4H, CO2CH2), 5.58 (s, 2H, CH2), 6.99–7.48 (m, 6H, ArH), 7.63–8.28 (m, 8H, ArH+C5-H), and 8.65 (s, 1H, ArH). 13C-NMR (75 MHz, DMSO-d6): δ (ppm) = 14.11 (CH3), 22.69 (CH2), 25.98 (CH2), 28.61 (CH2), 29.25 (CH2), 29.36 (CH2), 29.54 (CH2), 29.61 (CH2), 29.70 (CH2), 31.91 (CH2), 50.43 (CH2), 65.98 (OCH2), 118.65 (CAr), 119.20 (CAr), 124.81 (CAr), 127.52 (CAr), 128.47 (CAr), 128.64 (CAr), 128.69 (CAr), 128.84 (CAr), 129.07 (CAr), 130.64 (CAr), 131.85 (CAr), 133.17 (CAr), 133.84 (CAr), 135.24 (CAr), 144.10 (CAr), 149.32 (CAr), 157.70 (CO), and 165.21 (CO2). MS (EI, T = 37–50 °C): m/z = 965.31 (Calcd. 965.31 for [M + Na+]). Elemental analysis, calcd. (%) for C59H83N5O5: C 75.20, H 8.88, N 7.43; found C 75.14, H 8.82, N 7.35.
4,6-Diphenyl-2-((1-(3,4,5-tris(hexadecyloxy)phenyl)-1H-1,2,3-triazol-4-yl)methyl)pyridazin-3(2H)-one 10
The title compound was separated and purified by column chromatography (PE/EA, 7/3) as a white solid (86%). TLC (PE/EA 7/3) Rf = 0.39. 1H-NMR (300 MHz, DMSO-d6): δ (ppm) = 0.85 (t, 3J = 7.03 Hz, 9H, CH3), 1.20–1.35 (m, 78H, CH2), 1.80–1.85 (m, 6H, CH2), 3.85–3.93 (m, 6H, OCH2), 5.57 (s, 2H, CH2), 7.23–7.33 (m, 5H, ArH), 7.49–7.56 (m, 5H, ArH), and 7.92–8.12 (m, 4H, ArH+C5-H). 13C-NMR (75 MHz, DMSO-d6): δ (ppm) = 14.12 (CH3), 22.53 (CH2), 25.94 (CH2), 27.68 (CH2), 29.28 (CH2), 29.34 (CH2), 29.56 (CH2), 29.60 (CH2), 29.73 (CH2), 31.87 (CH2), 50.72 (CH2), 70.53 (OCH2), 74.12 (OCH2), 102.82 (CAr), 119.31 (CAr), 122.59 (CAr), 123.37 (CAr), 127.69 (CAr), 128.45 (CAr), 128.67 (CAr), 128.78 (CAr), 128.97 (CAr), 129.11 (CAr), 130.01 (CAr), 131.84 (CAr), 131.89 (CAr), 135.52 (CAr), 140.27 (OCAr), 144.15 (CAr), 148.65 (OCAr), 156.42 (CAr), and 158.31 (CO). MS (EI, T = 37–50 °C): m/z = 1127.73 (Calcd. 1127.73 for [M+H+]). Elemental analysis, calcd. (%) for C73H115N5O4: C 77.82, H 10.29, N 6.22; found C 77.86, H 10.24, N 6.17.
(S)-2,5,8,11-Tetraoxatetradecan-13-yl-3,5-bis(4-((6-oxo-3,5-diphenylpyridazin-1(6H)-yl)methyl)-1H-1,2,3-triazol-1-yl)benzoate 12
The title compound was separated and purified by column chromatography (PE/EA, 8/2) as a beige solid (79%). TLC (PE/EA, 8/2) Rf = 0.36. 1H-NMR (300 MHz, DMSO-d6): δ (ppm) = 1.27 (d, 2J = 6.2 Hz, 3H, CHCH3), 3.10 (s, 3H, OCH3), 3.25–3.41 (m, 14H, OCH2), 5.24–5.33 (m, 1H, CHCH3), 5.57 (s, 4H, CH2), 7.39–7.42 (m, 10H, ArH), 7.47 (d, 2J = 2.1 Hz, 4H, ArH), 7.91–7.96 (m, 7H, ArH), 8.08 (m, 2H, C5-H), 8.62 (s, 2H, ArH), and 9.03 (s, 2H, ArH). 13C-NMR (75 MHz, DMSO-d6): δ (ppm) = 16.20 (CHCH3), 47.71 (CH2), 57.87 (OCH3), 69.44 (CHCH3), 69.65 (OCH2), 69.73 (OCH2), 70.06 (OCH2), 71.12 (OCH2), 71.26 (OCH2), 72.52 (OCH2), 115.50 (CAr), 119.57 (CAr), 122.83 (CAr), 126.00 (CAr), 127.04 (CAr), 127.98 (CAr), 128.68 (CAr), 128.91 (CAr), 129.25 (CAr), 129.38 (CAr), 132.95 (CAr), 133.75 (CAr), 134.43 (CAr), 137.61 (CAr), 138.56 (CAr), 143.67 (CAr), 144.10 (CAr), 158.21 (CO), and 163.32 (CO2). MS (EI, T = 37–50 °C): m/z = 982.11 (Calcd. 982.07 for [M+H+]). Elemental analysis, calcd. (%) for C55H52N10O8: C 67.33, H 5.34, N 14.28; found C 67.39, H 5.28, N 14.34.
3,5-Diazidobenzoic acid 13
In a one-necked round-bottomed flask, (4 mmol, 1 equiv.) of 3,5-diaminobenzoic acid was dissolved in 18% HCl under heating with a heat gun and the mixture was cooled to 0 °C in an ice bath. Sodium nitrite (8.4 mmol, 2.1 equiv.) was added in small portions. The mixture was stirred for 15 min at 0 °C, then NaN3 (8.8 mmol, 2.2 equiv.) was added in small portions and the stirring was continued for 30 min, while the temperature was maintained at 0 °C. The mixture was poured into 400 ml ice water, filtered, and the solid was washed with water. The title compound was obtained as a colorless solid (86%) and was found to be sufficiently pure for characterization without further purification. 1H-NMR (300 MHz, D2O): δ (ppm) = 7.01 (s, 1H, ArH), 7.33 (s, 2H, ArH), and 13.43 (s, 1H, CO2H). 13C-NMR (75 MHz, D2O): δ (ppm) = 113.98 (CAr), 116.00 (CAr), 133.92 (CAr), 141.46 (CAr), and 165.73 (CO2).
3,5-Bis(4-((6-oxo-3,5-diphenylpyridazin-1(6H)-yl)methyl)-1H-1,2,3-triazol-1-yl)benzoic acid 14
The title compound was separated and purified by column chromatography (PE/EA, 7/3) as a beige solid (75%). TLC (PE/EA, 7/3) Rf = 0.41. 1H-NMR (300 MHz, DMSO-d6): δ (ppm) = 5.59 (s, 4H, CH2), 7.45–7.50 (m, 11H, ArH), 7.93–7.99 (m, 10H, ArH), 8.14 (m, 2H, C5-H), 8.65 (s, 2H, ArH), 9.06 (s, 2H, ArH), and 13.21 (s, 1H, CO2H). 13C-NMR (75 MHz, DMSO-d6): δ (ppm) = 47.69 (CH2), 114.25 (CAr), 116.14 (CAr), 122.83 (CAr), 124.64 (CAr), 126.10 (CAr), 127.21 (CAr), 128.04 (CAr), 128.37 (CAr), 128.77 (CAr), 128.98 (CAr), 129.32 (CAr), 129.41 (CAr), 133.83 (CAr), 134.52 (CAr), 138.67 (CAr), 143.73 (CAr), 144.17 (CAr), 158.26 (CO), and 164.89 (CO2). MS (EI, T = 37–50 °C): m/z = 777.35 (Calcd. 777.81 for [M+H+]). Elemental analysis, calcd. (%) for C45H32N10O4: C 69.58, H 4.15, N 18.03; found C 69.53, H 4.21, N 17.95.
(S)-2,5,8,11-Tetraoxatetradecan-13-yl-3-(4-(4-(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-6-((triisopropylsilyl)ethynyl)pyridin-2-yl)-1H-1,2,3-triazol-1-yl)-5-(4-((6-oxo-3,5-diphenylpyridazin-1(6H)-yl)methyl)-1H-1,2,3-triazol-1-yl)benzoate 16
The title compound was separated and purified by column chromatography (PE/EA, 6/4) as a beige solid (82%). TLC (PE/EA, 6/4) Rf = 0.55 1H-NMR (300 MHz, DMSO-d6): δ (ppm) = 1.01 (q, J = 7.5 Hz, 3H, SiCHCH3), 1.09 (d, 2J = 1.8 Hz, 18H, SiCHCH3), 1.33 (d, 2J = 6.0 Hz, 3H, CHCH3), 3.20 (s, 3H, OCH3), 3.28 (s, 3H, OCH3), 3.36–3.60 (m, 22H, OCH2), 3.91 (t, 3J = 4.9 Hz, 2H, OCH2), 4.19 (t, 3J = 4.6 Hz, 2H, OCH2), 5.22–5.29 (m, 1H, CHCH3), 5.63 (s, 2H, CH2), 7.08 (d, 2J = 2.1 Hz, 2H, ArH), 7.29 (d, 2J = 2.5 Hz, 2H, ArH), 7.43–7.45 (m, 5H, ArH), 7.96–7.99 (m, 3H, ArH), 8.16 (s, 1H, C5-H), 8.54, 8.56 (ss, 2H, ArH), 9.02 (s, 2H, ArH), and 9.50 (s, 1H, ArH). 13C-NMR (75 MHz, CDCl3): δ (ppm) = 11.06 (SiCH), 16.27 (CHCH3), 18.45 (SiCHCH3), 47.79 (CH2), 57.91 (OCH3), 57.99 (OCH3), 68.60 (OCH2), 69.48 (OCH2), 69.61 (OCH2), 69.70 (OCH2), 69.78 (OCH2), 70.00 (OCH2), 70.08 (OCH2), 71.17 (OCH2), 71.26 (OCH2), 71.35 (OCH2), 72.56 (OCH2), 90.28 (C≡C), 106.08 (C≡C), 106.50 (CAr), 115.12 (CAr), 117.25 (CAr), 119.68 (CAr), 120.59 (CAr), 120.70 (CAr), 122.33 (CAr), 122.75 (CAr), 126.10 (CAr), 127.17 (CAr), 127.70 (CAr), 128.01 (CAr), 128.76 (CAr), 128.98 (CAr), 129.41 (CAr), 133.11 (CAr), 133.85 (CAr), 134.52 (CAr), 137.66 (CAr), 138.65 (CAr), 143.51 (CAr), 143.85 (CAr), 144.19 (CAr), 147.56 (CAr), 151.15 (CAr), 158.27 (CO), and 165.44 (CO2). MS (EI, T = 37–50 °C): m/z = 1141.21 (Calcd. 1141.41 for [M+H+]). Elemental analysis, calcd. (%) for C61H77N9O11Si: C 64.25, H 6.81, N 11.05; found C 64.28, H 6.87, N 10.98.
Octa(S)-2,5,8,11-tetraoxatetradecan-13-yl-5,5′,5″,5‴-(4,4′,4″,4‴-(4,4′-(4,4′-(4-(4-((6-oxo-3,5-diphenylpyridazin-1(6H)-yl)methyl)-1H-1,2,3-triazol-1-yl)pyridine-2,6-diyl)bis(1H-1,2,3-triazole-4,1-diyl))bis(pyridine-6,4,2-triyl))tetrakis(1H-1,2,3-triazole-4,1-diyl))tetraisophthalate 18
The title compound was separated and purified by column chromatography (CH2Cl2/CH3OH, 100/2) as a yellow solid (69%), TLC (CH2Cl2/CH3OH, 100/2) Rf = 0.36. 1H-NMR (300 MHz, CDCl3): δ (ppm) = 1.22 (d, 2J = 5.57 Hz, 24H, CHCH3), 3.09 (s, 24H, OCH3), 3.14–3.23 (m, 112H, CH2), 5.21 (s, 8H, CO2CH), 5.58 (s, 2H, CH2), 7.19–7.27 (m, 8H, ArH), 7.45–7.58 (m, 6H, ArH), 7.95 (s, 2H, ArH), 8.13 (s, 1H, C5-H), 8.20–8.32 (m, 11H, ArH), and 8.67–8.95 (m, 8H, ArH). 13C-NMR (75 MHz, CDCl3): δ (ppm) = 16.15 (CHCH3), 50.59 (CH2), 58.25 (OCH3), 65.73 (CH2), 69.98 (CH2), 70.08 (CH2), 70.42 (CH2), 70.89 (CH2), 72.18 (CH2), 74.35 (CH2), 117.06 (CAr), 117.43 (CAr), 120.12 (CAr), 126.11 (CAr), 121.68 (CAr), 123.45 (CAr), 125.34 (CAr), 127.42 (CAr), 128.07 (CAr), 128.57 (CAr), 128.71 (CAr), 128.89 (CAr), 129.15 (CAr), 129.54 (CAr), 130.21 (CAr), 132.26 (CAr), 133.80 (CAr), 134.71 (CAr), 135.18 (CAr), 136.02 (CAr), 137.02 (CAr), 139.87 (CAr), 141.61 (CAr), 142.03 (CAr), 145.42 (CAr), 152.75 (CAr), 157.82 (CO), and 164.51 (CO2). UPLC Rt = 5.82, 67% peak area. HRMS (ESI) m/z = 3254.466 (Calcd. 3254.482 for [M+H+]). Elemental analysis, calcd. (%) for C158H206N26O49: C 58.33, H 6.38, N 11.19; found C 58.27, H 6.45, N 11.12.
Results and discussion
We have utilized the CuI-catalyzed azide–alkyne cycloaddition reaction to prepare the dendronic materials under investigation in this work. To investigate the role of van der Waals forces in controlling the MSA of the dendronic triazolo-pyridazinones, long alkyl side chains were introduced into the dendronic framework through azide 5, which was prepared in a stepwise reaction as shown in Scheme 1.
Pyrogallol 1 reacted with 1-bromohexadecane in acetonitrile to afford the 1,2,3-tris(hexadecyloxy)benzene 2, which upon nitration gave the 1,2,3-tris(hexadecyloxy)-5-nitrobenzene 3. Thereafter, the 1,2,3-trisubstituted nitrobenzene 3 underwent hydrogenation over Pd/C catalyst in methanol to yield the corresponding 3,4,5-tris(hexadecyloxy)aniline 4, which was subsequently reacted with tert-butyl nitrite and trimethylsilyl azide to furnish the corresponding 5-azido-1,2,3-tris(hexadecyloxy)benzene 5. The chemical structure of azidobenzene 5 was determined using the various spectroscopic characterization techniques. The 1H-NMR of 5 showed the expected signals of the aliphatic chains at δ 0.90–3.98 ppm and the two symmetric aromatic signals at δ 6.23 ppm. The electron impact (EI) mass spectrum of 5 showed the expected protonated molecular ion at m/z 841.31 as [M+H+]. On the other hand, pyridazin-3(2H)-one 7, possessing two phenyl moieties and a free terminal alkyne group, was prepared in excellent yield (94%) via the basic treatment of 4,6-diphenylpyridazin-3(2H)-one 6 [27] with propargyl bromide in DMF. The 1H-NMR spectrum of 7 showed two singlet signals at δ 3.27 ppm and δ 5.03, corresponding to the acetylenic CH and CH2 protons, respectively. The EI mass spectrum showed the anticipated protonated molecular ion [M+H+] at m/z 287.34. The dihexadecyl-5-azidoisophthalate 8 with two long-chain alkyl side chains was prepared according to the reported synthetic procedure [28].
The CuI-catalyzed 1,3-dipolar cycloaddition reactions of aromatic azides 5 and 8 with the terminal alkyne functional group of the pyridazinone 7 afforded the first-generation G1 dendrons 9 and 10, possessing two and three long alkyl chains and two phenyl substituents loaded on the pyridazinone ring (Scheme 2). The 1,2,3-triazole rings function as junction units between the phenyl-substituted pyridazinones and the di- or tri-alkyl-substituted phenyl rings. The 1H-NMR spectrum of 9, for example, showed the signals corresponding to the alkyl chains at δ 0.82–3.96 ppm, in addition to the singlet CH2 protons at δ 5.58 ppm. The CH signal of the junction 1,2,3-triazole appeared downfield shifted, overlapping with the aromatic protons, at δ 7.63–8.28 ppm. The 13C-NMR spectrum of 9 showed the signal of the carbonyl group of the pyridazinone ring at δ 157.70 ppm, while the signal of the carbonyl group of the ester group appeared at δ 165.21 ppm. The EI mass spectrum showed the molecular ion peak at m/z 965.31 as [M+Na+]. On the other side, click chemistry was employed to prepare the second-generation G2 dendrons 12, 14, and 16. The click reactions of the terminal alkyne moiety of the pyridazinone 7 with the diazides 11 [29] and 13 afforded dendrons 12 and 14, thus introducing four phenyl rings to the dendronic structural framework to enhance the intermolecular π-stacking interactions as demonstrated in Scheme 3. The non-symmetric azide 15 was prepared according to the literature [29]. As similar, the click reaction of the pyridazinone 7 with azide 15 afforded the second-generation G2 dendron 16.
The 1H-NMR spectrum of dendron 12, for instance, showed the expected signals of the chiral glycol side chain at δ 1.27–5.33 ppm and the singlet CH2 at δ 5.57 ppm. The singlet CH signal of the junction 1,2,3-triazole appeared downfield shifted at δ 8.08 ppm (Fig. 1). The 13C-NMR spectrum of dendron 12 showed the signal of the carbonyl group of the pyridazinone ring and the carbonyl group of the glycol ester functionalities at δ 158.21 and 163.32 ppm, respectively. The EI mass spectrum confirmed the molecular weight of dendron 12 via the appearance of the characteristic peak of the protonated molecular ion at m/z 982.11 as [M+H+]. The third-generation G3 dendron 17 [30] with a terminal azide group underwent click reaction with the terminal alkyne group of pyridazinone 7 to give dendron 18 (Scheme 4). The 1H-NMR spectrum of 18 showed the signals of the chiral glycol chains at δ 1.22–5.21 ppm and the singlet CH2 signal at δ 5.58 ppm. The singlet signal of the junction 1,2,3-triazole ring appeared at δ 8.13 ppm. The 13C-NMR spectrum of dendron 18 showed the signal of the carbonyl group of the pyridazinone ring and the carbonyl group of the glycol ester group at δ 157.82 and 164.51 ppm, respectively. The high-resolution electrospray ionization (ESI) mass spectrum of dendron 18 showed the anticipated protonated molecular ion peak at m/z 3254.466 as [M+H+]. The surface morphology of dendrons 9, 10, 12, 14, and 18 was investigated using the scanning electron microscope (SEM) analysis to investigate the roles of π-stacking and van der Waals forces in controlling the self-assembly of the dendronic materials. The dendrons 9 and 10 were self-assembled to form well-ordered and uniform nanofibrous aggregations as shown in Fig. 2. The self-assembly was most probably directed cooperatively by intermolecular π-stacking of the phenyl rings and the weak van der Waals forces of the long alkyl substituents.
The second-generation dendrons 12 and 14 incorporated four benzene rings in their structures to reinforce the intermolecular π-stacking interactions. However, they exhibited considerably different morphological features. The SEM examination of the dendron 14 revealed the formation of long extended and entwined nanofibers via π-stacking interactions, occurring between the phenyl substituents, as the main driving force of the intermolecular self-assembly, while dendron 12 formed interesting nanorod aggregations with a well-defined rectangle structure. As similar to dendron 14, the mode of assembly displayed by the dendron 12 was controlled by the intermolecular π-stacking interactions and the chirality introduced through the glycol chain, which was expected additionally to direct the MSA to form the rectangle nanorods. Unfortunately, the third-generation dendron 18 did not show any interesting morphological features as the role of the π-stacking interactions of the two phenyl rings might not be effectively relative to the structure of the dendron. The literature is rich with many examples which demonstrate the morphological dependence on the secondary noncovalent interactions of the self-assembled materials [31,32,33,34,35,36,37,38]. A recent example was reported by Yam and co-workers on the MSA of the platinum(II) 2,6-bis(benzimidazol-2-yl)pyridine double complex salts via metal–metal and π–π stacking interactions to form 1D infinite chains in water [39]. Another example was reported by Palanisamy et al. in which three weak noncovalent interactions, including van der Waals forces between the alkyl side chains, hydrogen bonding, and π-stacking, participated cooperatively in the MSA of aromatic biscarbamate architectures into xerogel fibers [40].
Conclusion
The CuI-catalyzed azide–alkyne cycloaddition reactions have been utilized to furnish the first-, second-, and third-generation dendrons via reacting 4,6-diphenyl-2-(prop-2-yn-1-yl)pyridazin-3(2H)-one 7, which possess free terminal alkyne group with aromatic mono- and diazides, possessing alkyl and glycol chain substituents. We have demonstrated the unique self-assembling ability of a series of alkyl- and aromatic-substituted dendrons into nanofiber and nanorod materials. The roles displayed by aromatic π-stacking and van der Waals interactions in controlling the morphology of the dendrons were investigated by the SEM analysis. The formation of extended fibers in case of dendrons 9 and 10 was most likely directed by cooperative aggregations resulted from the π-stacking interactions of the benzene groups and the van der Waals interactions between the long alkyl side-chain substituents. On the other side, the main driving force for the MSA of dendrons 12 and 14 into highly ordered nanorods with well-defined rectangle morphology or nanofibers was expected to be the π-stacking interactions of the aromatic substituents. The 4,6-diphenylpyridazin-3(2H)-one 6 has been shown to be a versatile precursor for the synthesis of both nanofibrous and nanorod materials through the introduction of the long alkyl chains via the click chemistry approach and the aromatic substituents loaded on the molecule.
References
Busseron, E., Ruff, Y., Moulin, E., Giuseppone, N.: Supramolecular self-assemblies as functional nanomaterials. Nanoscale 5, 7098–7140 (2013)
Zhan, J., Cai, Y., Ji, S., He, S., Cao, Y., Ding, D., Wang, L., Yang, Z.: Spatiotemporal control of supramolecular self-assembly and function. ACS Appl. Mater. Interfaces. 9(11), 10012–10018 (2017)
Soto, M.A., Tiburcio, J.: Self-assembly of a supramolecular network with pseudo-rotaxane cross-linking nodes and its transformation into a mechanically locked structure by rotaxane formation. Chem. Commun. 52, 14149–14152 (2016)
Cheng, C.-C., Wang, J.-H., Chuang, W.-T., Liao, Z.-S., Huang, J.-J., Huang, S.-Y., Fan, W.-L., Lee, D.-J.: Dynamic supramolecular self-assembly: hydrogen bonding-induced contraction and extension of functional polymers. Polym. Chem. 8, 3294–3299 (2017)
Satapathy, S., Prasad, E.: Charge transfer modulated self-assembly in poly(aryl ether) dendron derivatives with improved stability and transport characteristics. ACS Appl. Mater. Interfaces 8(39), 26176–26189 (2016)
Sivadas, A.P., Saleesh Kumar, N.S., Prabhu, D.D., Varghese, S., Krishna Prasad, S., Shankar Rao, D.S., Das, S.: Supergelation via purely aromatic π–π driven self-assembly of pseudodiscotic oxadiazole mesogens. J. Am. Chem. Soc. 136(14), 5416–5423 (2014)
Xu, Q., Zhao, X.: Electrostatic interactions versus van der Waals interactions in the self-assembly of dispersed nanodiamonds. J. Mater. Chem. 22, 16416–16421 (2012)
Kawano, S.-I., Murai, T., Harada, T., Tanaka, K.: Columnar liquid-crystalline macrocycles synthesized via metal ion-assisted self-assembly. Inorg. Chem. 57(7), 3913–3919 (2018)
Rolandi, M., Rolandi, R.: Self-assembled chitin nanofibers and applications. Adv. Colloid Interface Sci. 207, 216–222 (2014)
Leung, F.C.-M., Leung, S.Y.-L., Chung, C.Y.-S., Yam, V.W.-W.: Metal–metal and π–π interactions directed end-to-end assembly of gold nanorods. J. Am. Chem. Soc. 138(9), 2989–2992 (2016)
Durmus, A., Gunbas, G., Farmer, S.C., Olmstead, M.M., Mascal, M., Legese, B., Cho, J.-Y., Beingessner, R.L., Yamazaki, T., Fenniri, H.: Synthesis of N-substituted pyrido[4,3-d]pyrimidines for the large-scale production of self-assembled rosettes and nanotubes. J. Org. Chem. 78(22), 11421–11426 (2013)
Putaux, J.-L., Lancelon-Pin, C., Legrand, F.-X., Pastrello, M., Choisnard, L., Gèze, A., Rochas, C., Wouessidjewe, D.: Self-assembly of amphiphilic biotransesterified β-cyclodextrins: supramolecular structure of nanoparticles and surface properties. Langmuir 33(32), 7917–7928 (2017)
Saikia, N., Pandey, R.: Polarity-induced surface recognition and self-assembly of noncanonical DNA nucleobases on h-BN monolayer. J. Phys. Chem. C 122, 3915–3925 (2018)
Rong, J., Niu, Z., Lee, L.A., Wang, Q.: Self-assembly of viral particles. Curr. Opin. Colloid Interface Sci. 16, 441–450 (2011)
Jackman, J.A., Tabaei, S.R., Zhao, Z., Yorulmaz, S., Cho, N.-J.: Self-assembly formation of lipid bilayer coatings on bare aluminum oxide: overcoming the force of interfacial water. ACS Appl. Mater. Interfaces 7(1), 959–968 (2015)
Semerdzhiev, S.A., Dekker, D.R., Subramaniam, V., Claessens, M.M.A.E.: Self-assembly of protein fibrils into suprafibrillar aggregates: bridging the nano- and mesoscale. ACS Nano 8(6), 5543–5551 (2014)
Teyssandier, J., De Feyter, S., Mali, K.S.: Host-guest chemistry in two-dimensional supramolecular networks. Chem. Commun. 52, 11465–11487 (2016)
Cai, Z.-F., Yan, H.-J., Wang, D., Wan, L.-J.: Potential- and concentration-dependent self-assembly structures at solid/liquid interfaces. Nanoscale 10, 3438–3443 (2018)
El Malah, T., Ciesielski, A., Piot, L., Troyanov, S.I., Mueller, U., Weidner, S., Samorì, P., Hecht, S.: Conformationally pre-organized and pH-responsive flat dendrons: synthesis and self-assembly at the liquid–solid interface. Nanoscale 4, 467–472 (2012)
Piot, L., Meudtner, R.M., El Malah, T., Hecht, S., Samorì, P.: Modulating large-area self-assembly at the solid–liquid interface by pH-mediated conformational switching. Chem. Eur. J. 15(19), 4788–4792 (2009)
Lee, H.-Y., Shin, S.H.R., Drews, A.M., Chirsan, A.M., Lewis, S.A., Bishop, K.J.M.: Self-assembly of nanoparticle amphiphiles with adaptive surface chemistry. ACS Nano 8(10), 9979–9987 (2014)
Guan, Z., Liu, D., Lin, J., Wang, X.: Aqueous self-assembly of hydrophobic macromolecules with adjustable rigidity of the backbone. Soft Matter 13, 5130–5136 (2017)
Mishra, A.K., Weissman, H., Krieg, E., Votaw, K.A., McCullagh, M., Rybtchinski, B., Lewis, F.D.: Self-assembly of perylenediimide–single-strand-DNA conjugates: employing hydrophobic interactions and DNA base-pairing to create a diverse structural space. Chem. Eur. J. 23(43), 10328–10337 (2017)
Rubio, J., Alfonso, I., Burguete, M.I., Luis, S.V.: Interplay between hydrophilic and hydrophobic interactions in the self-assembly of a gemini amphiphilic pseudopeptide: from nano-spheres to hydrogels. Chem. Commun. 48, 2210–2212 (2012)
Zornik, D., Meudtner, R.M., El Malah, T., Thiele, C.M., Hecht, S.: Designing structural motifs for clickamers: exploiting the 1,2,3-triazole moiety to generate conformationally restricted molecular architectures. Chem. Eur. J. 17(5), 1473–1484 (2011)
El Malah, T., Nour, H.F., Nayl, A.A., Elkhashab, R.A., Abdel-Megeid, F.M.E., Ali, M.M.: Anticancer evaluation of tris(triazolyl)triazine derivatives generated via click chemistry. Aust. J. Chem. 69(8), 905–910 (2016)
Ameen, M.A., Ahmed, EKh, El Malah, T., Abd El-naby, H.A., Abdel-Kader, A.A.: Click chemistry based synthesis of novel architectures bearing sugar unit at the pyridothienopyrimidines. J. Heterocycl. Chem. 52(4), 1093–1098 (2015)
Cadeddu, A., Ciesielski, A., El Malah, T., Hecht, S., Samorì, P.: Modulating the self-assembly of rigid “clicked” dendrimers at the solid–liquid interface by tuning non-covalent interactions between side groups. Chem. Commun. 47(38), 10578–10580 (2011)
Meudtner, R.M., Hecht, S.: Helicity inversion in responsive foldamers induced by achiral halide ion guests. Angew. Chem. Int. Ed. 47(26), 4926–4930 (2008)
El Malah, T., Rolf, S., Weidner, S.M., Thünemann, A.F., Hecht, S.: Amphiphilic folded dendrimer discs and their thermosensitive self-assembly in water. Chem. Eur. J. 18(19), 5837–5842 (2012)
Zhang, L., Wang, X., Wang, T., Liu, M.: Tuning soft nanostructures in self-assembled supramolecular gels: from morphology control to morphology-dependent functions. Small 11(9–10), 1025–1038 (2015)
Grynʹova, G., Nicolaï, A., Prlj, A., Ollitrault, P., Andrienko, D., Corminboeuf, C.: Charge transport in highly ordered organic nanofibrils: lessons from modelling. J. Mater. Chem. C 5, 350 (2017)
Zang, L., Che, Y., Moore, J.S.: One-dimensional self-assembly of planar π-conjugated molecules: adaptable building blocks for organic nanodevices. Acc. Chem. Res. 41(12), 1596–1608 (2008)
Wu, Z., Pan, K., Lü, B., Ma, L., Yang, W., Yin, M.: Tunable morphology of spiropyran assemblies: from nanospheres to nanorods. Chem. Asian J. 11, 3102–3106 (2016)
Zhou, H., Yan, H., Zhang, A., Zheng, L., Jia, H.: π–π stacking interaction induced the assembly of gold nanorods. Mater. Chem. Phys. 148(3), 503–506 (2014)
Wang, Y., Wu, S., Yan, X., Ma, T., Shao, L., Liu, Y., Guo, Z.: Alkyl bicarbamates supramolecular organogelators with effective selective gelation and high oil recovery from oil/water mixtures. Chemosphere 167, 178–187 (2017)
Kocsis, I., Sorci, M., Vanselous, H., Murail, S., Sanders, S.E., Licsandru, E., Legrand, Y.-M., van der Lee, A., Baaden, M., Petersen, P.B., Georges Belfort, G., Barboiu, M.: Oriented chiral water wires in artificial transmembrane channels. Sci. Adv. 4(3), eaao5603 (2018)
Islam, M.R., Sundararajan, P.R.: Self-assembly of a set of hydrophilic-solvophobic-hydrophobic coil-rod-coil molecules based on perylene diimide. Phys. Chem. Chem. Phys. 15, 21058–21069 (2013)
Wong, V.C.-H., Po, C., Leung, S.Y.-L., Chan, A.K.-W., Yang, S., Zhu, B., Cui, X., Yam, V.W.-W.: Formation of 1D infinite chains directed by metal–metal and/or π–π stacking interactions of water-soluble platinum(II) 2,6-bis(benzimidazol-2′-yl)pyridine double complex salts. J. Am. Chem. Soc. 140(2), 657–666 (2018)
Baddi, S., Sarma, D.S., Palanisamy, A.: Self-assembly of aromatic biscarbamate gelators: effect of spacer length on the gelation and rheology. J. Sol-Gel. Sci. Technol. 79, 637–649 (2016)
Acknowledgements
The authors gratefully acknowledge the financial support of the sector of research projects at the National Research Centre, Cairo, Egypt (Project No. AR110101).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
There are no conflicts of interest to declare.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Malah, T.E., Nour, H.F. Synthesis of dendronic triazolo-pyridazinones and their self-assembly into nanofibers and nanorods. J Nanostruct Chem 8, 159–169 (2018). https://doi.org/10.1007/s40097-018-0262-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40097-018-0262-9