Skip to main content

Advertisement

Log in

A case study on regional impacts of climate change: peak loads on the power grid in Rochester, New York

  • Published:
Journal of Environmental Studies and Sciences Aims and scope Submit manuscript

Abstract

Understanding the effects of climate change and determining appropriate mitigation and adaptation measures comprise a paradigmatic example of an issue that crosses traditional disciplinary boundaries and requires communication and collaboration across many fields of study. For example, it is well documented that power consumption in the USA increases drastically when summer temperatures spike (Wong et al., IEEE Trans Powere Syst 25:480–488, 2010). As people resort to air conditioning to curb the heat, the strain on the power grid can become overwhelming, occasionally leading to blackouts. This is already a serious issue in some areas of the USA. However, it is unclear to what extent future climate scenarios will increase electrical demand in any particular area and whether this will lead to increased risk of blackouts from excessive electrical demand. To illustrate the powerful potential for interdisciplinary collaboration between departments of mathematics and environmental studies and sciences, we use predictions of peak electrical load and the likelihood of resultant blackouts in Rochester, NY under the IPCC A2 climate change scenario as a case study. Using publicly available climate simulations and regional climate data, coupled with simple mathematical modeling of extreme events (generalized extreme value distributions), we develop a planning tool for predicting regional power demand. In this case, our model forecasts that a given extreme peak load which now occurs only once every 20 years, will occur annually by around 2050. This information is crucial for planning our future electrical power needs.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3

Similar content being viewed by others

Notes

  1. Return levels are the output of Eq. 2 populated with the parameters from Table 2, and p = 1/t is the input. So for this example, an input of p = 1/20 will give the most extreme average maximum temperature over two consecutive days that we may expect to occur over a period of 20 years.

  2. This is accomplished simply by using the return level curves plotted in Fig. 2 as the input for the regression model, Eq. 6.

References

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Thomas J. Pfaff.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Constable, S., Hamilton, J. & Pfaff, T.J. A case study on regional impacts of climate change: peak loads on the power grid in Rochester, New York. J Environ Stud Sci 3, 15–20 (2013). https://doi.org/10.1007/s13412-012-0097-5

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13412-012-0097-5

Keywords

Navigation