Abstract
This paper summarizes recent developments in the field of nanoindentation analysis of highly heterogeneous composites. The fundamental idea of the proposed approach is that it is possible to assess nanostructure from the implementation of micromechanics-based scaling relations for a large array of nanoindentation tests on heterogeneous materials. We illustrate this approach through the application to calcium-silicate-hydrate (C-S-H), the binding phase of all cement-based materials. For this important class of materials, we show that C-S-H exists in at least three structurally distinct but compositionally similar forms: low density, high density and ultra-high density. These three forms differ merely in the packing density of 5-nm sized particles. The proposed approach also gives access to the solid particle properties of C-S-H, which can now be compared with results from atomistic simulations. By way of conclusion, we show how this approach provides a new way of analyzing complex hydrated nanocomposites, in addition to classical microscopy techniques and chemical analysis. This approach will turn out invaluable in our quest of adding the necessary “green” value to a commodity, concrete, by nano-engineering higher strength and toughness from first principles.
Similar content being viewed by others
References
ACI Committee 318: Building code requirements for reinforced concrete (ACI 318-95). American Concrete Institute, Farmington Hills (1995)
Bobko C., Ulm F.-J.: The nano-mechanical morphology of shale. Mech. Mater 40(4–5), 318–337 (2008)
Cariou S., Ulm F.J., Dormieux L.: Hardness-packing density scaling relations for cohesive-frictional porous materials. J. Mech. Phys. Solids 56, 924–952 (2008)
Constantinides G., Ulm F.-J.: The effect of two types of C-S-H on the elasticity of cement-based materials: results from nanoindentation and micromechanical modeling. Cem. Concr. Res 34(1), 67–80 (2004)
Constantinides G., Ulm F.-J.: The nanogranular nature of C-S-H. J. Mech. Phys. Solids 55(1), 64–90 (2007)
Constantinides G., Ulm F.-J., Van Vliet K.: On the use of nanoindentation for cementitious materials. Mater. Struct 36(3), 191–196 (2003)
Dalgleish B.J., Ibe K.: “Thin foil studies of hydrated cements. ” Cement and Concrete Research 11, 729–739 (1981)
DeJong M.J., Ulm F.-J.: The nanogranular behavior of C-S-H at elevated temperatures (up to 700°C). Cem. Concr. Res 37(1), 1–12 (2007)
Donev A., Cisse I., Sachs D., Variano E.A., Stillinger F.H., Connely R., Torquato S., Chaikin P.M.: Improving the density of jammed disordered packings using ellipsoids. Science 303, 990–993 (2004)
Dormieux L., Kondo D., Ulm F.-J.: Microporomechanics. Wiley, UK (2006)
Gathier, B.; Ulm, F.-J.: Multiscale strength homogenization - application to shale nanoindentation. MIT-CEE Res. Rep. R08-01, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge (2008)
Groves G.W.: TEM studies of cement hydration. Mat. Res. Soc. Symposium Proc 85, 3–12 (1987)
Helmuth, R.A.; Turk, D.H.;: Elastic moduli of hardened portland cement and tricalcium silicate pastes: effect of porosity. In: Symposium on structure of Portland cement paste and concrete, pp. 135–144 (1966)
Jaeger H.M., Nagel S.R.: Physics of granular state. Science 255(5051), 1523–1531 (1992)
Jennings H.M.: A model for the microstructure of calcium silicate hydrate in cement paste. Cem. Concr. Res 30, 101–116 (2000)
Jennings H.M.: Colloid model of C-S-H and implications to the problem of creep and shrinkage. Mat. Struct 37((265), 59–70 (2004)
Jennings H.M.: Refinements to colloid model of C-S-H in cement: CM-II. Cem Concr Res 38((3), 275–289 (2008)
Jennings H.M., Thomas J.J., Gevrenov J.S., Constantinides G., Ulm F-J.: A multi-technique investigation of the nanoporosity of cement paste. Cem. Concr. Res 37((3), 329–336 (2007)
Mondal P., Shah S.P., Marks L.: A reliable technique to determine the local mechanical properties at the nanoscale for cementitious materials. Cem. Concr. Res 37(10), 1440–1444 (2007)
Oliver W.C., Pharr G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res 7(6), 1564–1583 (1992)
Pellenq R.J.M. et al.: A realistic molecular model of cement hydrates. PNAS 106(38), 16102–16107 (2009)
Powers, T.C.; Brownyard, T.L.: Studies of the physical properties of hardened Portland cement paste. Bull. 22, Res. Lab. of Portland Cement Association, Skokie, IL, U.S. J. Am. Concr. Inst. (Proc.), 43 (1947) 101–132, 249–336, 469–505, 549–602, 669–712, 845–880, 933–992 (reprint) (1947)
Richardson I.G.: The nature of C-S-H in hardened cements. Cem. Concr. Res 29, 1131–1147 (1999)
Richardson I.G.: “Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of C-S-H: applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume. Cem. Concr. Res 34, 1733–1777 (2004)
Richardson I.G., Rodger S.A., Groves G.W.: The porosity and pore structure of hydrated cement pastes as revealed by electron microscopy techniques. Mat. Res. Soc. Symp. Proc 137, 313–318 (1989)
Sanahuja J., Dormieux L., Chanvillard G.: Modelling elasticity of a hydrating cement paste. Cem. Concr. Res 37, 1427–1439 (2007)
Scrivener K.L., Patell H.H., Pratt P.L., Parrott L.J.: Analysis of phases in cement paste using backscattered electron images, methanol adsorption and thermogravimetric analysis. Mat. Res. Soc. Symp. Proc 85, 67–76 (1985)
Sloane N.J.A.: Kepler’s conjecture confirmed. Nature 395, 435–436 (1998)
Taplin J.H.: A method for following the hydration reaction in portland cement paste. Aust. J. Appl. Sci 10, 329–345 (1959)
Taylor H.F.W.: Studies on the chemistry and microstructure of cement pastes. Proc. Brit. Ceram. Soc 35, 65–82 (1984a)
Taylor H.F.W.: Newbury DE, An electron microprobe study of a mature cement paste. Cem. Concr. Res 14, 565–573 (1984b)
Tennis P.D., Jennings H.M.: A model for two types of calcium silicate hydrate in the microstructure of portland cement pastes. Cem. Concr. Res 30, 855–863 (2000)
Thomas, J.J.; Jennings, H.M.; Allen, A.J.: The surface area of cement paste as measured by neutron scattering: evidence for two C-S-H morphologies. Cem. Concr. Res. 28(6), 897–905
Ulm, F.J.; Jennings, H.M.: Does C-S-H particle shape matter? A discussion of the paper ‘Modelling elasticity of a hydrating cement paste’, by Julien Sanahuja, Luc Dormieux and Gilles Chanvillard. CCR 37 (2007) 1427–1439. Cem. Concr. Res. 38(8–9), 1126–1129 (2008)
Ulm F-J., Constantinides G., Heukamp F.H.: Is concrete a poromechanics material? A multiscale investigation of poroelastic properties. Mater. Struct 37((265), 43–58 (2004)
Ulm F.J., Vandamme M., Bobko C., Ortega J.A., Tai K., Ortiz C.: Statistical indentation techniques for hydrated nanocomposites: concrete, bone, and shale. J. Am. Ceram. Soc 90(9), 2677–2692 (2007)
Vandamme M., Ulm F-J., Fonollosa P.: Nanogranular packing of C-S-H at substochiometric conditions. Cem. Concr. Res 40, 14–26 (2010)
Verbeck, G.J.; Helmuth, R.A.: Structures and physical properties of cement paste. In: 5th Internaional congress cement chemistry, Tokyo, pp. 1–44 (1969)
Viehland D., Li J.F., Yuan L.J., Xu Z.K.: Mesostructure of calcium silicate hydrate (C-S-H) gels in portland-cement paste-a short range ordering nanocrystallinity and local compositional order. J. Am. Ceram. Soc 79(7), 1731–1744 (1996)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ulm, FJ. Nano-Engineering of Concrete. Arab J Sci Eng 37, 481–488 (2012). https://doi.org/10.1007/s13369-012-0181-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-012-0181-x