Abstract
Attentions have been increasingly paid to the influence of the corrosion on the ultimate strength of ship structures. In consideration of the random characteristics of the corrosion of ship structures, the method for the ultimate strength analysis of the ship stiffened panel structure subjected to random corrosion degradation is presented. According to the measured corrosion data of the bulk carriers, the distribution characteristics of the corrosion data for the stiffened panel on the midship deck are analyzed, and a random corrosion model is established. The ultimate strength of the corroded stiffened panel is calculated by the nonlinear finite element analysis. The statistical descriptions of the ultimate strength of the corroded stiffened panel are defined through the Monte Carlo simulations. A formula is proposed on the ultimate strength reduction of the stiffened panel as a function of the corrosion volume. The reliability analysis of the ultimate strength of the corroded deck stiffened panel is performed. It shows that both the corrosion data of the deck stiffened panel and the ultimate strength of the random corroded deck stiffened panel follow the log-normal distribution. The ultimate stress ratio of the stiffened panel is inversely proportional to the corrosion volume ratio.
Similar content being viewed by others
References
Dunbar, T.E., Pegg, N., Taheri, F. and Jiang, L., 2004. A computational investigation of the effects of localised corrosion on plates and stiffened panels, Mar. Struct., 17(5), 385–402.
Faulkner, D., 1975. A review of effective plating for use in the analysis of stiffened plating in bending and compression, J. Ship Res., 19, 1–17.
Guedes Soares, C. and Garbatov, Y., 1999a. Reliability of maintained corrosion protected plates subjected to non-linear corrosion and compressive loads, Mar. Struct., 12(6), 425–445.
Guedes Soares, C. and Garbatov, Y., 1999b. Reliability of maintained ship hulls subjected to corrosion and fatigue under combined loading, J. Constr. Steel Res., 52(1), 93–115.
Guo, J.T., 2010. Reliability-Based Inspection Planning with Application to Deck Structure Thickness Measurement of Corroded Aging Tankers, The University of Michigan.
Huang, Y., Zhang, Y., Liu, G. and Zhang, Q., 2010. Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression, Ocean Eng., 37(17–18), 1503–1512.
IACS, 2006. Common Structural Rules for Bulk Carriers, London, UK.
Islam, M.R. and Sumi, Y., 2011. Geometrical effects of pitting corrosion on strength and deformability of steel rectangular plates subjected to uniaxial tension and pure bending, Journal of Japanese Society Naval Achitects and Ocean Engineering, 14, 9–17.
ISSC, 2006. Report of specialist committee III.1 Ultimate strength, Proceedings of the 16th International Ship and Offshore Structures Congress, Seoul, Korea, 353–438.
Jiang, X.L. and Guedes Soares, C., 2012a. A closed form formula to predict the ultimate capacity of pitted mild steel plate under biaxial compression, Thin Wall. Struct., 59, 27–34.
Jiang, X.L. and Guedes Soares, C., 2012b. Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads, Mar. Struct., 26(1), 27–41.
Khedmati, M.R., Nouri, Z.H.M.E. and Moradidohezari, K., 2012. A computational investigation of the effects of both-sides general corrosion on the buckling/plastic collapse behaviour and strength of stiffened plates, J. Mar. Sci. Technol., 17(1), 68–93.
Melchers, R.E., 1999. Corrosion uncertainty modelling for steel structures, J. Constr. Steel Res., 52(1), 3–19.
Nakai, T., Masssushita, H. and Yamamoto, N., 2004. Effect of pitting corrosion on local strength of hold frames of bulk carriers (2nd report)-lateral-distortional buckling and local face buckling, Mar. Struct., 17(8), 612–641.
Nakai, T., Masssushita, H. and Yamamoto, N., 2006a. Effect of pitting corrosion on strength of web plates subjected to patch loading, Thin Wall. Struct., 44(1), 10–19.
Nakai, T., Matsushita, H. and Yamamoto, N., 2006b. Effect of pitting corrosion on the ultimate strength of steel plates subjected to inplane compression and bending, J. Mar. Sci. Technol., 11(1), 52–64.
Paik, J.K., Kim, S.K. and Lee, S.K., 1998. Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers, Ocean Eng., 25(10), 837–860.
Paik, J.K., Lee, J.M. and Ko, M.J., 2003. Ultimate compressive strength of plate elements with pit corrosion wastage, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217(4), 185–200.
Paik, J.K. and Thayamballi, A.K., 2003. Ultimate Limit State Design of Steel-Plated Structures, England, John Wiley & Sons.
Qin, S.P. and Cui, W.C., 2003. Effect of corrosion models on the timedependent reliability of steel plated elements, Mar. Struct., 16(1), 15–34.
Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C., 2011. Corrosion-dependant ultimate strength assessment of aged box girders based on experimental results, J. Ship Res., 55(4), 289–300.
Saad-Eldeen, S., Garbatov, Y. and Guedes Soares, C., 2013. Experimental assessment of corroded steel box girders subjected to uniform bending, Ships and Offshore Structures, 8(6), 653–662.
Silva, J.E., Garbatov, Y. and Guedes Soares, C., 2013. Ultimate strength assessment of rectangular steel plates subjected to a random localized corrosion degradation, Eng. Struct., 52, 295–305.
Silva, J.E., Garbatov, Y. and Guedes Soares, C., 2014. Reliability assessment of a steel plate subjected to distributed and localized corrosion wastage, Eng. Struct., 59, 13–20.
Southwell, C.R., Bultman, J.D. and Hummer, J.C.W., 1979. Seawater Corrosion Handbook, New Jersey, USA, Noyes Data Corporation.
Teixeira, A.P., Guedes Soares, C. and Wang, G., 2013. Probabilistic modelling of the ultimate strength of ship plates with non-uniform corrosion, J. Mar. Sci. Technol., 18(1), 115–132.
Wang, G., Lee, A.K., Ivanov, L., Lynch, T.J., Serratella, C. and Basu, R., 2008. A statistical investigation of time-variant hull girderstrength of aging ships and coating life, Mar. Struct., 21(2–3), 240–256.
Yamamoto, N. and Ikagaki, K., 1998. A study on the degradation of coating and corrosion on ship’s hull based on the probabilistic approach, J. Offshore Mech. Arct. Eng., 120(3), 121–128.
Zhang, D.K., Tang, W.Y. and Zhang, S.K., 2007. Time-variant reliability analysis of FPSO hull girder considering corrosion based on statistics, China Ocean Eng., 21(2), 197–205.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: This work was partially supported by the National Natural Science Foundation of China (Grant No. 51279034).
Rights and permissions
About this article
Cite this article
Feng, Gq., Hu, Bn. & Ren, Hl. Reliability of the ultimate strength of ship stiffened panel subjected to random corrosion degradation. China Ocean Eng 31, 11–18 (2017). https://doi.org/10.1007/s13344-017-0002-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13344-017-0002-9