Skip to main content
SpringerLink
Log in

A Study on the Bending and Seismic Performance of High Performance Cold Forming Composite Beam

  • Published:
International Journal of Steel Structures Aims and scope Submit manuscript

Abstract

Nowadays, the researches about composite structure system are being implemented in various fields, and many steel structures are designed based on that. In this study, the bending and seismic performance of the newly developed high-performance cold forming composite beam are evaluated by several experiments. As a result of the bending performance test, the bending moment of beam was increased stably depending on the depth and plate thickness of beam, and it is considered that the bending moment can be evaluated by the equation of a composite beam design. As a result of the seismic performance test, it was verified that sufficient seismic performance was obtained despite the increase of a negative moment rebar and depth of beam. In addition, the nominal bending moment has obtained the strength above the plastic bending moment, and also the plastic rotation angle has satisfied the requirement of composite intermediate moment frame.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

References

  • AIK. (2009). Korea building code and commentary structural. Architectural Institute of Korea (KBC 2009).

  • AISC. (2010). Steel construction manual 14th, Seismic Design Manual 2nd. American Institute of Steel Construction, USA.

  • Heo, B. W., Kwak, M. K., Bae, K. W., & Jeong, S. M. (2007). Flexural capacity of the profiled steel composite beams-deep deck plate. Journal of Korean Society of Steel Construction, 19(3), 247–258.

    Google Scholar 

  • Hicks, S. J., & Smith, A. L. (2014). Stud shear connectors in composite beams that support slabs with profiled steel sheeting. Structural Engineering International, 24(2), 246–253.

    Article  Google Scholar 

  • JISF. (1996). A valuation basis proposal of standard test method for a seismic capacity evaluation performance of steel structure, Japan.

  • Jung, J. C., Lee, C. N., Lee, S. H., & Kim, H. S. (2014). Seismic performance test of TSC composite beam to CRC composite column connections. Journal of Architectural Institute of Korea, 30(11), 21–28.

    Google Scholar 

  • Kim, S. B., Kim, S. S., Lee, W. R., Kim, J. Y., Lee, S. B., Ryu, D. S., et al. (2012a). Study on the flexible strength of U-shape hybrid composite beam. Journal of Korean Society of Steel Construction, 24(5), 521–534.

    Article  Google Scholar 

  • Kim, S. B., Kim, S. S., & Ryu, D. S. (2013). Study on the cyclic seismic testing of U-shape hybrid composite beam-to-composite column connections. Journal of Korean Society of Steel Construction, 25(1), 47–59.

    Article  Google Scholar 

  • Kim, H. S., Lee, C. N., Lee, S. H., & Kim, B. R. (2012b). Seismic performance test of concrete-filled u-shaped steel beam-to-prefabricated column connections. Journal of Architectural Institute of Korea, 28(4), 55–64.

    Google Scholar 

  • KSSC. (2011). Korean steel structure design code and commentary-load and resistance factored design. Korean Society of Steel Construction.

  • Lee, D. H., Kim, K. S., Oh, J. Y., Lim, J. H., Choi, S. M., & Kim, J. H. (2010). Experimental study on prestressed composite girder with corrugated webs. Journal of Architectural Institute of Korea, 26(11), 57–65.

    Google Scholar 

  • Plumier, A., & Doneux, C. (2001). Seismic behavior and design of composite steel concrete structures. Research Report, LNEC, Portugal.

  • Salmon, C. G., Johnson, J. E., & Malhas, F. A. (2009). Steel structures-design and behavior (5th ed.). USA: Prentice Hall.

    Google Scholar 

  • Yang, I. S. (2011). Strength of composite beam using shear connectors installed in driving pin under vertical loading. Journal of Architectural Institute of Korea, 27(9), 85–92.

    Google Scholar 

Download references

Acknowledgements

This paper was supported by the National Research Foundation of Korea in 2016 (No. NRF-2014 R1A2A1A11052803).

Author information

Authors and Affiliations

  1. Department of Architectural Engineering, KOREATECH, Cheonan, 31253, Korea

    Young Han Choi & Hyung Ju Hong

  2. The Naeun Structural Engineering, Seoul, 07205, Korea

    Sung Bae Kim

  3. School of Design and Architectural Engineering, KOREATECH, Cheonan, 31253, Korea

    Sang Seup Kim

Authors
  1. Young Han Choi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Sung Bae Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Hyung Ju Hong
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Sang Seup Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Sang Seup Kim.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Choi, Y.H., Kim, S.B., Hong, H.J. et al. A Study on the Bending and Seismic Performance of High Performance Cold Forming Composite Beam. Int J Steel Struct 18, 1772–1783 (2018). https://doi.org/10.1007/s13296-018-0088-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13296-018-0088-9

Keywords

Search

Navigation