Skip to main content

Advertisement

Log in

Composite coating composed of zeolite Y (FAU) and binder prepared from bis(triethoxysilyl)ethane

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

Composite coatings were prepared from dealuminated zeolite Y and a hybrid polymer sol made from bis(triethoxysilyl)ethane. The zeolite pore accessibility and the microstructure were determined by gas sorption experiments and SEM measurements. The influence of different zeolite loadings was analyzed. In conclusion, the samples offered good pore accessibility if the zeolite content was at least 60% by weight. Such samples exhibited secondary pores in the macropore dimension. Furthermore, the obtained coatings offered wipe resistance and could easily be applied on flexible substrates. In addition, they showed reversible adsorption capacity of formaldehyde, which demonstrates their potential for application as an adsorptive layer for pollutants.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. Corma, A, Miguel, PJ, Orchillés, AV, “Product Selectivity Effects During Cracking of Alkanes at Very Short, Longer Times on Stream.” Appl. Catal. A, 138 57–73 (1996)

    Article  Google Scholar 

  2. Jolly, S, Saussey, J, Bettahar, MM, Lavalley, JC, Benazzi, E, “Reaction Mechanisms, Kinetics in the n-Hexane Cracking Over Zeolites.” Appl. Catal. A, 156 71–96 (1997)

    Article  Google Scholar 

  3. Wichterlová, B, Čejka, J, Žilková, N, “Selective Synthesis of Cumene, p-Cymene over Al, Fe Silicates With Large, Medium Pore Structures.” Microporous Mater., 6 405–414 (1996)

    Article  Google Scholar 

  4. Kuznicki, SM, Bell, VA, Langner, TW, Curran, JS, “Method of Static Water Softening Using Zeolites of Novel Morphology”. U.S. Patent 6572776, June 03, 2003.

  5. Bouvier, L, Nicolas, S, Medevielle, A, Alex, P, “Zeolite Adsorbent Having an Organic Binder”. U.S. Patent Appl. 0259828, Oct 27, 2011.

  6. Tchernev, DJ, “Heat Pump Energized by Low-Grade Heat Source”. WIPO. Patent Appl. 85/05170, November 11, 1985.

  7. Gunschera, J, Markewitz, D, Koberski, U, Salthammer, T, “Catalyzed Reactions on Mineral Plaster Materials Used for Indoor Air Purification.” Clean, Soil, Air Water, 41 (41) 437–446 (2013)

    Article  Google Scholar 

  8. Mehretie, S, Losada, J, Tessema, M, Admassie, S, Solomon, T, Perez-Pariente, J, Díaz, I, “Stripping voltammetric determination of pyridine-2-aldoxime methochloride at the iron (iii) doped zeolite modified glassy carbon electrode.” Analyst, 137 5625–5631 (2012)

    Article  Google Scholar 

  9. Ono, Y, Kimura, K, Wakita, H, Yamade, Y, Nishida, H, “Catalytic Body and Process for Producing the Same.” U.S. Patent 5278113, Jan 11, 1994.

  10. Ohno, K, Kunieda, M, Ido, T, “Honeycomb Structure.” Eur. Pat. Appl. 2130600, Dec 09, 2009.

  11. Shiraishi, F, Yamaguchi, S, Ohbuchi, Y, “A Rapid Treatment of Formaldehyde in a Highly Tight Room Using a Photocatalytic Reactor Combined with a Continuous Adsorption and Desorption Apparatus.” Chem. Eng. Sci., 58 929–934 (2003)

    Article  Google Scholar 

  12. Shah, D, Kissick, K, Ghorpade, A, Hannah, R, Bhattacharyya, D, “Pervaporation of Alcohol–Water, Dimethylformamide–Water Mixtures Using Hydrophilic Zeolite NaA Membranes: Mechanisms, Experimental Results.” J. Membr. Sci., 179 185–205 (2000)

    Article  Google Scholar 

  13. Lim, HM, Jung, JS, Kim, BY, Lee, SH, “Application of Zeolites on Cellulose Fiber.” Key Eng. Mat., 317–318 777–780 (2006)

    Article  Google Scholar 

  14. Lisi, L, Pirone, R, Russo, G, Stanzione, V, “Cu-ZSM5 Based Monolith Reactors for NO Decomposition.” Chem. Eng. J., 154 341–347 (2009)

    Article  Google Scholar 

  15. Pina, K, Mallada, R, Arruebo, M, Urbiztondo, M, Navascués, N, de la Iglesia, O, Santamaria, J, “Zeolite Films and Membranes. Emerging Applications.” Microporous Mesoporous Mater., 144 19–27 (2011)

    Article  Google Scholar 

  16. Lakiss, L, Yordanov, I, Majano, G, Metzger, T, Mintova, S, “Effect of Stabilizing Binder, Dispersion Media on Spin-On Zeolite Thin Films.” Thin Solid Films, 518 2241–2246 (2010)

    Article  Google Scholar 

  17. Kobi, R, Nimrod, E, Ziv, G, “Clumping Animal Litter and Method of Making Same”. U.S. Patent 6745720, June 08, 2004.

  18. C. Toles Coated Print Media and Method for Making the Same. WIPO Pat. Appl. 2010/123505, October 28, 2010.

  19. Li, YY, Perera, SP, Crittenden, BD, Bridgewater, J, “The Effect of the Binder on the Manufacture of a 5A Zeolite Monolith.” Powder Technol., 116 85–96 (2001)

    Article  Google Scholar 

  20. Choudhary, VR, Devadas, P, Kinage, AK, Guisnet, M, “Influence of Binder on the Acidity and Performance of H-Gallosilicate (MFI) Zeolite in Propane Aromatization.” Appl. Catal. A, 162 223–233 (1997)

    Article  Google Scholar 

  21. De Lucas, A, Sánchez, P, Fúnez, A, Ramos, MJ, Valverde, JL, “Influence of clay binder on the liquid phase hydroisomerization of n-octane over palladium-containing zeolite catalysts.” J. Mol. Catal. A: Chem., 259 259–266 (2006)

    Article  Google Scholar 

  22. Macko, T, Denayer, JF, Pasch, H, Baron, GV, “Adsorption of Polyethylene from Thermodynamically Good Solvents on a Zeolite Stationary Phase.” J. Sep. Sci., 26 1569–1574 (2003)

    Article  Google Scholar 

  23. Macko, T, Pasch, H, Denayers, JF, “Adsorption of Polypropylene from Dilute Solutions on a Zeolite Column Packing.” J. Sep. Sci., 28 59–64 (2005)

    Article  Google Scholar 

  24. Hermsen, GF, de Geeter, BA, van der Vegt, NFA, Wessling, M, “Monte Carlo Simulation of Partially Confined Flexible Polymers.” Macromolecules, 35 5267–5272 (2002)

    Article  Google Scholar 

  25. Buttersack, C, Rudolph, H, Mahrholz, J, Buchholz, K, “High Specific Interaction of Polymers with the Pores of Hydrophobic Zeolites.” Langmuir, 12 3101–3106 (1996)

    Article  Google Scholar 

  26. Padareva, V, Touleshkov, N, Kirov, G, “Modification of Polyethylene with Activated Natural Zeolite.” J. Macromol. Sci. Part A: Pure Appl. Chem, 35 1079–1091 (1998)

    Article  Google Scholar 

  27. Macko, T, Denayer, JF, Pasch, H, Pan, L, Li, J, Raphael, A, “Adsorption of Polypropylene and Polyethylene on Liquid Chromatographic Column Packings.” Chromatographia, 59 461–467 (2004)

    Google Scholar 

  28. Hamciuc, C, Hamciuc, E, Okrasa, L, Kalvachev, Y, “The Effect of Zeolite L Content on Dielectric Behavior, Thermal Stability of Polyimide Thin Films.” J. Mater. Sci., 47 6354–6365 (2012)

    Article  Google Scholar 

  29. Suárez, S, Devaux, A, Bañuelos, J, Bossart, O, Kunzmann, A, Calzaferri, G, “Transparent Zeolite-Polymer Hybrid Materials with Adaptable Properties.” Adv. Funct. Mater., 17 2298–2306 (2007)

    Article  Google Scholar 

  30. Husain, S, Koros, WJ, “Mixed Matrix Hollow Fiber Membranes Made with Modified HSSZ-13 Zeolite in Polyetherimide Polymer Matrix for Gas Separation.” J. Membr. Sci., 288 195–207 (2007)

    Article  Google Scholar 

  31. Vangeneugden, D, Paulussen, S, Goossens, O, Rego, R, Rose, K, “Aerosol-Assisted Plasma Deposition of Barrier Coatings using Organic-Inorganic Sol-Gel Precursor Systems.” Chem. Vap. Depos., 11 491–496 (2005)

    Article  Google Scholar 

  32. Haas, K-H, Amberg-Schwab, S, Rose, K, Schottner, G, “Functionalized Coatings Based on Inorganic–Organic Polymers (ORMOCER®s), Their Combination with Vapor Deposited Inorganic Thin Films.” Surf. Coat. Technol., 111 72–79 (1999)

    Article  Google Scholar 

  33. Duval, J-M, Kemperman, AJB, Folkers, B, Mulder, MHV, Desgrandchamps, G, Smolders, CA, “Preparation of Zeolite Filled Glassy Polymer Membranes.” J. Appl. Polym. Sci., 54 409–418 (1994)

    Article  Google Scholar 

  34. Li, Y, Guana, H-M, Chunga, T-S, Kulprathipanja, S, “Effects of Novel Silane Modification of Zeolite Surface on Polymer Chain Rigidification, Partial Pore Blockage in Polyethersulfone (PES) Zeolite A Mixed Matrix Membranes.” J. Membr. Sci., 275 17–28 (2006)

    Article  Google Scholar 

  35. Gallagher, D, Ring, TA, “Sol-Gel Processing of Ceramic Films.” Chimia, 43 298–304 (1989)

    Google Scholar 

  36. Brinker, CJ, Scherer, GW, Sol-Gel Science, 1st ed. Academic Press, San Diego (1990)

    Google Scholar 

  37. De Graeve, I, Tourwé, E, Biesemans, M, Willem, R, Terryn, R, “Silane Solution Stability and Film Morphology of Water-Based Bis-1,2-(triethoxysilyl)ethane for Thin-Film Deposition on Aluminium.” Prog. Org. Coat., 63 38–42 (2008)

    Article  Google Scholar 

  38. Franquet, A, Biesemans, M, Willem, R, Terryn, H, Vereecken, J, “Multinuclear 1D- and 2D-NMR Study of the Hydrolysis and Condensation of Bis-1,2-(triethoxysilyl)Ethane.” J. Adhes. Sci. Technol., 18 765–778 (2004)

    Article  Google Scholar 

  39. Matinlinna, J, Özcan, M, Lassila, L, Kalk, W, Vallittu, P, “Effect of the cross-linking silane concentration in a novel silane system on bonding resin-composite cement.” Acta Odontol. Scand., 66 250–255 (2008)

    Article  Google Scholar 

  40. Thompson, RW, Libby, BE, Berry, MB, Rose, K, Haas, K-H, “Anorganisch/Organische Polysiloxanhybridpolymere”. DE. Patent Appl. 19853971, May 25, 2000.

  41. Berry, MB, Libby, BE, Rose, K, Haas, K-H, Thompson, RW, “Incorporation of Zeolites into Composite Matrices.” Microporous Mesoporous Mater., 39 205–217 (2000)

    Article  Google Scholar 

  42. Ogihara, T, Yagihashi, F, Nakagawa, H, Sasago, M, “Composition for Forming Porous Film, Porous Film and Method for Forming the Same, Interlevel Insulator Film, and Semiconductor Device”. U.S. Patent 7309722, Dec 18, 2007.

  43. Liu, W, Huang, C, Chiang, S, “Transparent Aqua-Based Nano Sol-Gel Composition and Method of Applying the Same”. Br. Patent App. 2454774, May 20, 2009.

  44. Kumbar, SM, Selvam, T, Gellermann, C, Storch, W, Ballweg, T, Breu, J, Sextl, G, “ORMOCERs (Organic–Inorganic Hybrid Copolymers)-Zeolite Beta (BEA) Nanocomposite Membranes for Gas Separation Applications.” J. Membr. Sci., 347 132–140 (2010)

    Article  Google Scholar 

  45. Kumbar, SM, “ORMOCER (Inorganic-Organic Hybrid Polymer)-Zeolite Nanocomposites: Advanced Membrane Materials for Gas Separation. Ph.D. Dissertation, Universität Bayreuth, 2010.

  46. Gunschera, J, Thole, V, Markewitz, D, Bokelmann, K, Selvam, T, Halbhuber, A, “Wood Material Product and Method for the Production Thereof”. U.S. Patent Appl. 2012/0108707, May 03, 2012.

  47. Kim, KJ, Kil, MJ, Song, JS, Yoo, EH, “Efficiency of Volatile Formaldehyde Removal by Indoor Plants: Contribution of Aerial Plant Parts versus the Root Zoe.” J. Am. Soc. Hort. Sci., 133 521–526 (2008)

    Google Scholar 

  48. Janssen, AH, Koster, AJ, de Jong, KP, “Three-Dimensional Transmission Electron Microscopic Observations of Mesopores in Dealuminated Zeolite Y.” Angew. Chem. Int. Ed., 40 1102–1104 (2001)

    Article  Google Scholar 

  49. Janssen, AH, Koster, AJ, de Jong, KP, “On the Shape of the Mesopores in Zeolite Y: A Three-Dimensional Transmission Electron Microscopy Study Combined with Texture Analysis.” J. Phys. Chem. B, 106 11905–11909 (2002)

    Article  Google Scholar 

  50. van Donk, S, Janssen, AH, Bitter, JH, de Jong, KP, “Generation, Characterization, Impact of Mesopores in Zeolite Catalysts.” Catal. Rev., 45 297–319 (2003)

    Article  Google Scholar 

  51. Lohmeier, SJ, Klank, D, “Physisorptionsstudien mit Unterschiedlichen Adsorptiven zur Charakterisierung von Mikro- und Mesoporösen Materialien—Zeolithe, MOFs und poröse Silica—Teil 2.” Quantachrome Partikelwelt, 142 22–27 (2012)

    Google Scholar 

  52. Lee, J-H, Zapata, P, Choi, S, Meredith, JC, “Effect of Nanowhisker-Modified Zeolites on Mechanical, Thermal Properties of Poly(vinyl Acetate) Composites with Pure-Silica MFI.” Polymer, 51 5744–5755 (2010)

    Article  Google Scholar 

  53. NIST Mass Spec Data Center, Stein, S.E., director, “Mass Spectra”, in: Lindstrom, PJ, Mallard, WG (Eds.), NIST Chemistry Web Book, NIST Standard Reference Database Number 69, National Institute of Standards Technlology, 2013, http://webbook.nist.gov.

  54. Hesse, M, Meier, H, Zeeh, B, Spektroskopische Methoden in der Organischen Chemie, 5th ed. Georg Thieme Verlag Stuttgart, New York (1995)

    Google Scholar 

  55. Stone, FS, Agudo, AL, “The Dehydration of Isopropanol Over Zeolite Catalysts.” Z. Phys. Chem., 64 161–170 (1969)

    Article  Google Scholar 

  56. Schulz, J, Bandermann, F, “Conversion of Ethanol Over Zeolite H-ZSM-5.” Chem. Eng. Technol., 17 179–186 (1994)

    Article  Google Scholar 

  57. Cerqueira, HS, Magnoux, P, Martin, D, Guisnet, M, “Coke Formation, Coke Profiles During the Transformation of Various Reactants at 450°C Over a USHY Zeolite.” Appl. Catal. A, 208 359–367 (2001)

    Article  Google Scholar 

  58. Paweewan, B, Barrie, PJ, Gladden, LF, “Coking During Ethene Conversion on Ultrastable Zeolite Y.” Appl. Catal. A, 167 353–362 (1998)

    Article  Google Scholar 

  59. Guisnet, M, Magnoux, P, “Deactivation by Coking of Zeolite Catalysts. Prevention of Deactivation. Optimal Conditions for Regeneration.” Catal. Today, 36 477–483 (1997)

    Article  Google Scholar 

  60. Oviatt, HW, Shea, KJ, Small, JH, “Alkylene-Bridged Silsesquioxane Sol-Gel Synthesis and Xerogel Characterization. Molecular Requirements for Porosity.” Chem. Mater., 5 943–950 (1993)

    Article  Google Scholar 

  61. Bailey, A, Cadenhead, DA, Davies, DH, Everett, DH, Miles, AJ, “Low Pressure Hysteresis in the Adsorption of Organic Vapours by Porous Carbons.” Trans. Faraday Soc., 67 231–243 (1971)

    Article  Google Scholar 

  62. Tsyurupa, MP, Davankov, VA, “Hypercrosslinked Polymers: Basic Principle of Preparing the New Class of Polymeric Materials.” React. Funct. Polym., 53 193–203 (2002)

    Article  Google Scholar 

  63. Kamiya, Y, Hirose, T, Mizoguchi, K, Naito, Y, “Gravimetric Study of High-Pressure Sorption of Gases in Polymers.” J. Polym. Sci., Part B: Polym. Phys., 24 1525–1539 (1986)

    Article  Google Scholar 

  64. Hatchfield, PB, Carpenter, JM, “The Problem of Formaldehyde in Museum Collections.” Int. J. Mus. Man. Curator, 5 183–188 (1986)

    Article  Google Scholar 

  65. Gibson, LT, Kerr, WJ, Nordon, A, Reglinski, J, Robertson, C, Turnbull, L, Watt, CM, Cheung, A, Johnstone, W, “On-site Determination of Formaldehyde: A Low Cost Measurement Device for Museum Environments.” Anal. Chim. Acta, 623 109–116 (2008)

    Article  Google Scholar 

  66. Brimblecombe, P, “The Composition of Museum Atmospheres.” Atmos. Environ. Part B., 24 1–8 (1990)

    Article  Google Scholar 

Download references

Acknowledgments

The authors are grateful to Professor Josef Breu from the University of Bayreuth for fruitful discussions. Furthermore, our special thanks go to Mr. Michel, Mr. Olsowski, and Ms. Henning for helping with the other experiments. In addition, we are grateful to the Elite Network of Bavaria (ENB) and the Fraunhofer Institute for Silicate Research (ISC) for financial support.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to N. Brockmann.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Brockmann, N., Bokelmann, K., Rose, K. et al. Composite coating composed of zeolite Y (FAU) and binder prepared from bis(triethoxysilyl)ethane. J Coat Technol Res 14, 153–162 (2017). https://doi.org/10.1007/s11998-016-9838-9

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-016-9838-9

Keywords

Navigation