Abstract
In this paper we report recent advances in pulsed-laser-deposited AIN thin films for high-temperature capping of SiC, passivation of SiC-based devices, and fabrication of a piezoelectric MEMS/NEMS resonator on Pt-metallized SiO2/Si. The AlN films grown using the reactive laser ablation technique were found to be highly stoichiometric, dense with an optical band gap of 6.2 eV, and with a surface smoothness of less than 1 nm. A low-temperature buffer-layer approach was used to reduce the lattice and thermal mismatch strains. The dependence of the quality of AlN thin films and its characteristics as a function of processing parameters are discussed. Due to high crystallinity, near-perfect stoichiometry, and high packing density, pulsed-laser-deposited AlN thin films show a tendency to withstand high temperatures up to 1600°C, and which enables it to be used as an anneal capping layer for SiC wafers for removing ion-implantation damage and dopant activation. The laser-deposited AlN thin films show conformal coverage on SiC-based devices and exhibit an electrical break-down strength of 1.66 MV/cm up to 350°C when used as an insulator in Ni/AlN/SiC metal-insulator-semiconductor (MIS) devices. Pulsed laser deposition (PLD) AlN films grown on Pt/SiO2/Si (100) substrates for radio-frequency microelectrical and mechanical systems and nanoelectrical and mechanical systems (MEMS and NEMS) demonstrated resonators having high Q values ranging from 8,000 to 17,000 in the frequency range of 2.5–0.45 MHz. AlN thin films were characterized by x-ray diffraction, Rutherford backscattering spectrometry (in normal and oxygen resonance mode), atomic force microscopy, ultraviolet (UV)-visible spectroscopy, and scanning electron microscopy. Applications exploiting characteristics of high bandgap, high bond strength, excellent piezoelectric characteristics, extremely high chemical inertness, high electrical resistivity, high breakdown strength, and high thermal stability of the pulsed-laser-deposited thin films have been discussed in the context of emerging developments of SiC power devices, for high-temperature electronics, and for radio frequency (RF) MEMS.
Similar content being viewed by others
References
S. Strite and H. Morkoc, J. Vac. Sci. Technol. B 10, 1237 (1992).
R.F. Davis, Proc. IEEE 79, 702 (1991).
R.D. Vispute, H. Wu, and J. Narayan, Appl. Phys. Lett. 67, 1549 (1995).
S. Iwama, K. Hayakawa, and T. Arizumi, J. Cryst. Growth 56, 265 (1982).
J.B. MacChesney, P.M. Bridenbaugh, and P.B. O’Connor, Mater. Res. Bull. 5, 783 (1970).
G.A. Slack and S.F. Bartram, J. Appl. Phys. 46, 89 (1975).
W.J. Meng, Properties of Group III Nitrides, ed. J. H. Edgar, EMIS Data Reviews Series no. N11, (London: INSPEC, 1994), pp. 22–29.
A.T. Collins, E.C. Lightowlers, and P.J. Dean, Phys. Rev. 158, 833 (1967).
H. Okano, N. Tanaka, Y. Takahashi, T. Tanaka, K. Shibata, and S. Nakano, Appl. Phys. Lett. 64, 166 (1994).
D. Alexson et al., J. Phys. Condens. Matter 17, R637 (2005).
T.P. Chow and R. Tyagi, IEEE Trans. Electron Devices 41, 1481 (1994).
Silicon Carbide, A Review of Fundamental Questions and Applications To Current Device Technology, Vols. I and II, ed. W.J. Choyke, H.M. Matsunami, and G. Pensi (Berlin: Akademic Verlag, 1998).
Properties of Silicon Carbide, ed. G. Harries, Emis Data Review Series, Vol. 13 (London: INSPEC, 1995).
J.J. Sumakeris, J.R. Jenny, and A.R. Powell, MRS Bull. 30, 280 (2005).
R.F. Davis, G. Kelner, M. Shur, J.W. Palmour, and J.A. Edmond, Proc. IEEE 79, 677 (1991).
H.L. Dunlap and O.J. Marsh, Appl. Phys. Lett. 15, 311 (1969).
S. Seshadri, G.W. Eldridge, and A.K. Agarwal, Appl. Phys. Lett. 72, 2026 (1998).
K.A. Jones, K. Xie, D.W. Eckart, M.C. Wood, V. Talyansky, R.D. Vispute, T. Venkatesan, K. Wongchotigul, and M. Spencer, J. Appl. Phys. 83, 8010 (1998).
K.A. Jones, M.A. Derenge, T.S. Zheleva, K.W. Kirchner, M.H. Ervin, and M.C. Wood, J. Electron. Mater. 29, 262 (2000).
K.A. Jones, M.A. Derenge, M.H. Ervin, P.B. Shah, J.A. Freitas, Jr., and R.D. Vispute, Phys. Status Solidi 201A, 486 (2004).
S. Osono, Y. Uchiyama, M. Kitazoe, K. Saito, M. Hayama, A. Masuda, A. Izumi, and H. Matsumura, Thin Solid Films 430, 165 (2003).
CRC Materials Science and Engineering Handbook, 63rd ed. (Boca Raton, FL: CRC Press, 1982–1983).
F. Xu, R.A. Wolf, T. Yoshimura, and S. Trolier-McKinstry, Proceedings of 11th International Symposium on Electrets, ed. R.J. Fleming (Piscataway, NJ: IEEE, 2002), pp. 386–396.
G.M. Rebeiz, RF MEMS: Theory, Design, and Technology (Hoboken, NJ: John Wiley & Sons, Inc., 2003).
A.N. Cleland, M. Pophristic, and I. Ferguson, Appl. Phys. Lett. 79, 2070 (2001).
A. Ballato, J.G. Gualtieri, and J.A. Kosinski, Proc. Ninth IEEE Intl. Symp. Appl. Ferroelectrics, 674 (1994).
T.S. Low and W. Guo, J. MEMS 4, 230 (1995).
A.E. Wickenden, L.J. Currano, T. Takacs, J. Pulskamp, M. Dubey, S.S. Hullavarad, and R.D. Vispute, Integr. Ferroelectr. 54, 565 (2003).
S.H. Lee, J. Lee, and K. Yoon, J. Vac. Sci. Technol., A 21, 1 (2003).
C.R. Aita, J. Appl. Phys. 53, 1807 (1982).
S. Muhl, J.A. Zapien, J.M. Mendez, and E. Andrade, J. Phys. D 30, 2147 (1997).
S. Yoshida, S. Misawa, and Y. Fujii, J. Vac. Sci. Technol. 16, 990 (1979).
M.T. Duffy, C.C. Wang, and G.D. O’Clock, J. Electron. Mater. 2, 359 (1973).
A.H. Khan, M.F. Odeh, and J.M. Meese, J. Mater. Sci. 29, 4314 (1994).
J.K. Liu, K.M. Lakin, and K.L. Wang, J. Appl. Phys. 46, 3703 (1975).
R.D. Vispute, J. Narayan, H. Wu, and K. Jagannadham, J. Appl. Phys. 77, 4724 (1995).
C.J. Scozzie, A.J. Lelis, F.B. McLean, R.D. Vispute, S. Choopun, A. Patel, R.P. Sharma, and T. Venkatesan, J. Appl. Phys. 86, 4052 (1999).
A.J. Lelis, C.J. Scozzie, F.B. McLean, B.R. Geil, R.D. Vispute, and T. Venkatesan, Mater. Res. Forum 338–342, 1137 (2000).
C.M. Zetterling, M. Ostling, K. Wongchotigul, M.G. Spencer, X. Tang, C.I. Harris, N. Nordell, and S.S. Wong, J. Appl. Phys. 82, 2990 (1997).
Pulsed Laser Deposition of Thin Films, ed. D.B. Chrisey and G.K. Hubler (New York: John Wiley & Sons, 1994).
41.I.N. Mihailescu, E. Gyorgy, and T. Asakura (ed.), Pulsed Laser Deposition: An Overview, Springer Series in Optical Science (New York: Springer-Verlag, 1999), pp. 201–214.
S.S. Hullavarad, R.D. Vispute, B. Varughese, S. Dhar, I. Takeuchi, and T. Venkatesan, J. Vac. Sci. Technol. A 23, 982 (2005).
R.D. Vispute, J. Narayan, and J.D. Budai, Thin Solid Films 299, 94 (1997).
S. Yamada, J. Kato, S. Tanaka, I. Suemune, A. Avramescu, Y. Aoyagi, N. Teraguchi, and A. Suzuki, Appl. Phys. Lett. 78, 3612 (2001).
I. Akasaki, H. Amano, Y. Koide, K. Kiramatsu, and N. Sawaki, J. Cryst. Growth 98, 209 (1989).
R.D. Vispute, A. Patel, R.P. Sharma, T. Venkatesan, T. Zheleva, and K.A. Jones, Mater. Res. Soc. Symp. 587, O7.4.1 (2000).
F.S. Ohuchi and R.H. French, J. Vac. Sci. Technol. A 6, 1695 (1988).
B.C. Chung and M. Gershenzon, J. Appl. Phys. 72, 651 (1992).
K. Jagannadham, A.K. Sharma, Q. Wei, R. Kalyanraman, and J. Narayan, J. Vac. Sci. Technol. A 16, 2804 (1998).
K.A. Jones, P.B. Shah, T.S. Zheleva, M.H. Ervin, M.A. Derenge, J.A. Freitas, S. Harmon, J. McGee, and R.D. Vispute, J. Appl. Phys. 96, 5613 (2004).
K.A. Jones, M.H. Ervin, P.B. Shah, M.A. Derenge, R.D. Vispute, and T. Venkatesan, and J.A. Freitas, AIP Conf. Proc. 680, 694 (2003).
T. Ohno, H. Onose, Y. Sugawara, K. Asano, T. Hayashi, and T. Yatsuo, J. Electron. Mater. 28, 180 (1999).
I.O. Usov, A.A. Suvorova, V.V. Sololov, Y.A. Kudryavtsev, and A.V. Suvorov, J. Appl. Phys. 86, 6039 (1999).
S.S. Hullavarad, R.D. Vispute, T. Venkatesan, and K.A. Jones, “Growth of TaC on SiC and AlN/SiC” (in preparation).
T. Ouisse, H.P.D. Schenk, S. Karmann, and U. Kaiser, in Proceedings of the International Conference on Silicon Carbide III-Nitrides and Related Materials-1997 Vols. 264–268, Materials Science Forum, ed. G. Pensl, H. Morkoc, B. Monemar, and E. Janzen (Ütikon, Zürich, Switzerland: Trans Tech, 1998), p. 1389.
C. Kim, I.K. Robinson, J. Myoung, K.H. Shim, and K. Kim, J. Appl. Phys. 85, 4040 (1999).
T.W. Weeks, Jr., D.M. Bremser, K.S. Alley, E. Carlson, W.G. Perry, and R.F. Davis, Appl. Phys. Lett. 70, 2735 (1997).
S.M. Sze, Physics of Semiconductor Devices, 2nd ed. (New York: Wiley, 1981), p. 402.
Chanana et al., Appl. Phys. Lett. 77, 2560 (2000).
R. Bathe et al., Thin Solid Films 398, 575 (2001).
N. Reeves, E. Muzio, S.S. Hullavarad, R.D. Vispute, T. Venkatesan, B. Geil, A. Lelis, D. Habersat, and C.Z. Scozzie, “AIN Film on SiC Device Side Walls,” PEER-MERIT (University of Maryland, College Park, MD, 2002).
B. Nagaraj, S.S. Hullavarad, R.D. Vispute, T. Venkatesan, A. Lelis, D. Habersat, and C.J. Scozzie, “Dielectric Properties of Sputtered AIN Thin Films on SiC-Based Devices” (under preparation).
L.J. Currano, A.E. Wickenden, M. Dubey, IEEE-NANO 2003 2, 778 (2003).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hullavarad, S.S., Vispute, R.D., Nagaraj, B. et al. Advances in pulsed-laser-deposited AIN thin films for high-temperature capping, device passivation, and piezoelectric-based RF MEMS/NEMS resonator applications. J. Electron. Mater. 35, 777–794 (2006). https://doi.org/10.1007/s11664-006-0138-5
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11664-006-0138-5