Abstract
The electrical power generation from low temperature heat source attracts more and more attentions but the temperature mismatching between the heat sources and working medium in the organic Rankine cycle (ORC) becomes an issue. The organic flash cycle (OFC) is an effective solution to this issue. In this paper, the OFC is analyzed by the concept of entransy loss and the T-Q̇ (temperature-heat flow rate) diagram for the heat-work conversion. The equations for cycles of the basic OFC and the OFC whose heat source is the exhaust gas of the turbine in a Brayton cycle (the combined cycle) are derived theoretically and the results indicate that larger entransy loss rate leads to larger output power with prescribed inlet parameters of the hot stream in the discussed cases, which is displayed by the T-Q̇ diagram intuitively. Two numerical examples demonstrate that the optimal mass flow rate of the working medium for the maximum entransy loss rate is the same as that for the maximum output power. The T-Q̇ diagram analyses is in accordance with the numerical results. The concept of entransy loss can be used as the criteria for the OFC optimization.
Similar content being viewed by others
References
Weng C C, Huang M J. A simulation study of automotive waste heat recovery using a thermoelectric power generator. Int J Therm Sci, 2013, 71: 302–309
Lovegrove K, Dennis M. Solar thermal energy systems in Australia. Int J Environ Stud, 2006, 63: 791–802
Tchanche B F, Lambrinos G, Frangoudakis A, et al. Low-grade heat conversion into power using organic Rankine cycle-A review of various applications. Renew Sust Energ Rev, 2011, 15: 3963–3979
Desai N B, Bandyopadhyay S. Process integration of organic Rankine cycle. Energy, 2009, 34: 1674–1686
Chacartegui R, Sánchez D, Muñoz J M, et al. Alternative ORC bottoming cycles for combined cycle power plants. Energy, 2009, 34: 1674–1686
Quoilin S, Broek M V D, Declaye S, et al. Techno-economic survey of organic Rankine cycle (ORC) systems. Renew Sust Energ Rev, 2013, 22: 168–186
Ho T, Mao S S, Greif R. Comparison of the organic flash cycle (OFC) to other advanced vapor cycles for intermediate and high temperature waste heat reclamation and solar thermal energy. Energy, 2012, 42: 213–223
Wang J L, Zhao L, Wang X D. A comparative study of pure and zeotropic mixtures in low-temperature solar Rankine cycle. Appl Energ, 2010, 87: 3366–3373
Wang X D, Zhao L. Analysis of zeotropic mixtures used in low-temperature solar Rankine cycles for power generation. Sol Energ, 2009, 83: 605–613
Wu C. Non-azeotropic mixture energy conversion. Energy Convers Manage, 1985, 25: 199–206
Chen H, Goswami D Y, Rahman M M, et al. A supercritical Rankine cycle using zeotropic mixture working fluids for the conversion of low-grade heat into power. Energy, 2010, 36: 549–555
Gu Z, Sato H. Performance of supercritical cycles for geothermal binary design. Energy Convers Manage, 2002, 43: 961–971
Chen Y, Lundqvist P, Johansson A, et al. A comparative study of the carbon dioxide transcritical power cycle compared with an organic Rankine cycle with R123 as working fluid in waste heat recovery. Appl Therm Eng, 2006, 26: 2142–2147
Ho T, Mao S S, Greif R. Increased power production through enhancements to the organic flash cycle (OFC). Energy, 2012, 45: 686–695
Guo Z Y, Zhu H Y, Liang X G. Entransy-A physical quantity describing heat transfer ability. Int J Heat Mass Transfer, 2007, 50: 2545–2556
Chen Q, Zhu H Y, Pan N, et al. An alternative criterion in heat transfer optimization. Proc R Soc A, 2011, 467: 1012–1028.
Chen L G. Progress in entransy theory and its applications. Chin Sci Bull, 2012, 57: 4404–4426
Feng H J, Chen L G, Sun F R. “Volume-point” heat conduction constructal optimization based on entransy dissipation rate minimization with three-dimensional cylindrical element and rectangular and triangular elements at micro and nanoscales. Sci China Tech Sci, 2012, 55: 779–794
Feng H J, Chen L G, Sun F R. Constructal optimization for H-shaped multi-scale heat exchanger based on entransy theory. Sci China Tech Sci, 2013, 56: 299–307
Feng H J, Chen L G, Xie Z H, et al. Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall. Int Commun Heat Mass Transfer, 2014, 52: 26–32
Cheng X T, Liang X G. Entransy loss in thermodynamic processes and its application. Energy, 2012, 44: 964–972
Wang W H, Cheng X T, Liang X G. Entropy and entransy analyses and optimizations of the Rankine cycle. Energy Convers Manage, 2013, 68: 82–88
Zhou B, Cheng X T, Liang X G. Power output analyses and optimizations of the stirling cycle. Sci China Tech Sci, 2013, 56: 228–236
Cheng X T, Liang X G. Heat-work conversion optimization of one-stream heat exchanger networks. Energy, 2012, 47: 421–429
Yang A B, Chen L G, Xia S J, et al. The optimal configuration of reciprocating engine based on maximum entransy loss. Chin Sci Bull, 2014, 59: 2031–2038
Cheng X T, Wang W H, Liang X G. Optimization of heat transfer and heat-work conversion based on generalized heat transfer law. Sci China Tech Sci, 2012, 55: 2847–2855
Chen Q, Xu Y C, Guo Z Y. The property diagram in heat transfer and its applications. Chin Sci Bull, 2012, 57: 4646–4652
Cheng X T, Liang X G. T-q diagram of heat transfer and heat-work conversion. Int Commun Heat Mass Transfer, 2014, 53: 9–13
Cheng X T, Wang W H, Liang X G. Entransy analysis of open thermodynamic systems. Sci China Tech Sci, 2012, 57: 2934–2940
Chen Z S. Advance Engineering Thermodynamics (in Chinese). Beijing: Higher Education Press, 2008
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, W., Cheng, X. & Liang, X. T-Q̇ diagram analyses and entransy optimization of the organic flash cycle (OFC). Sci. China Technol. Sci. 58, 630–637 (2015). https://doi.org/10.1007/s11431-014-5765-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-014-5765-0