Skip to main content
SpringerLink
Log in

Preparation of 3D electrocatalysts and catalysts for gas-phase reactions, through electrodeposition or galvanic displacement

  • Research Article
  • Published:
Journal of Applied Electrochemistry Aims and scope Submit manuscript

Abstract

Metal foams are interesting supports for the preparation of electrocatalysts and catalysts for gas-phase processes, like partial and total low-temperature oxidation of hydrocarbons and other chemicals, owing to their large surface area, electrical conductivity, efficient mass and heat transfer, mechanical strength and resistance to oxidation. High catalytic activity in specific processes can be imparted to metal foams by the deposition of appropriately chosen noble metal nanoparticles. Deposition may be achieved electrochemically or through spontaneous deposition processes based on galvanic displacement reactions in which a noble metal displaces a less noble one. In the materials prepared by these methods, noble metal nanoparticles are in direct electrical contact with metal foams, so cyclic voltammetry may be effectively used to determine their surface area, a parameter of primary importance in heterogeneous catalysis. These features are illustrated by reviewing the preparation, characterization and catalytic testing of various noble-metal-modified Ni and Fe–Cr–Al alloy metal foams, highlighting advantages and limitations of the proposed methods, as compared with state of the art approaches.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Alkire RC, Kibler LA, Kolb DM, Lipkowski J (eds) (2013) Advances in electrochemical science and engineering. In: Electrocatalysis: theoretical foundations and model experiments. vol 14. Wiley-VCH, Weinheim

  2. Lavacchi A, Miller H, Vizza F (2013) Nanotechnology in electrocatalysis for energy. Springer, New York

    Book  Google Scholar 

  3. Cybulski A, Moulijn J (eds) (2006) Structured catalysts and reactors, 2nd edn. Taylor & Francis, Boca Raton

    Google Scholar 

  4. Ertl G, Knözinger H, Weitkamp J (eds) (2007) Handbook of heterogeneous catalysis. VCH, Weinheim

    Google Scholar 

  5. Langlois S, Coeuret F (1989) Flow-through and flow-by porous electrodes of nickel foam I. Material characterization. J Appl Electrochem 19:43–50

    Article  CAS  Google Scholar 

  6. Langlois S, Coeuret F (1989) Flow-through and flow-by porous electrodes of nickel foam. II. Diffusion-convective mass transfer between the electrolyte and the foam. J Appl Electrochem 19:51–60

    Article  CAS  Google Scholar 

  7. Yamauchi Y, Komatsu M, Takai A, Sebata R, Sawada M, Momma T, Fuziwara M, Osaka T, Kuroda K (2007) Direct deposition of nanostructured Pt particles onto a Ni foam from lyotropic liquid crystalline phase by displacement plating. Electrochim Acta 53:604–609

    Article  CAS  Google Scholar 

  8. Bidault F, Brett DJL, Middleton PH, Abson N, Brandon NP (2009) A new application for nickel foam in alkaline fuel cells. Int J Hydrogen Energy 34:6799–6808

    Article  CAS  Google Scholar 

  9. He H, Liu H, Liu F, Zhou K (2006) Structures and electrochemical properties of amorphous nickel sulphur coatings electrodeposited on the nickel foam substrate as hydrogen evolution reaction cathodes. Surf Coat Technol 201:958–964

    Article  CAS  Google Scholar 

  10. Yang B, Yu G, Shuai D (2007) Electrocatalytic hydrodechlorination of 4-chlorobiphenyl in aqueous solution using palladized nickel foam cathode. Chemosphere 67:1361–1367

    Article  CAS  Google Scholar 

  11. Kvernes I, Oliveira M, Kofstad P (1977) High temperature oxidation of Fe-13Cr-xAl alloys in air/H2O vapour mixtures. Corros Sci 17:237–252

    Article  CAS  Google Scholar 

  12. Cerri I, Pavese M, Saracco G, Specchia V (2003) Premixed metal fibre burners based on a Pd catalyst. Catal Today 83:19–31

    Article  CAS  Google Scholar 

  13. Giani L, Cristiani C, Groppi G, Tronconi E (2006) Washcoating method for Pd/γ-Al2O3 deposition on metallic foams. Appl Catal B 62:121–131

    Article  CAS  Google Scholar 

  14. Basile F, Benito P, Del Gallo P, Fornasari G, Gary D, Rosetti V, Scavetta E, Tonelli D, Vaccari A (2008) Highly conductive Ni steam reforming catalysts prepared by electrodeposition. Chem Commun 25:2917–2919

    Article  Google Scholar 

  15. Basile F, Benito P, Fornasari G, Rosetti V, Scavetta E, Tonelli D, Vaccari A (2009) Electrochemical synthesis of novel structured catalysts for H2 production. Appl Catal B 91:563–572

    Article  CAS  Google Scholar 

  16. Benito P, Monti M, Bersani I, Basile F, Fornasari G, Scavetta E, Tonelli D, Vaccari A (2012) Coating of Fecralloy foam with Rh catalysts: optimization of electrosynthesis parameters and catalyst composition. Catal Today 197:162–169

    Article  CAS  Google Scholar 

  17. Verlato E, Barison S, Cimino S, Dergal F, Mancino G, Lisi L, Musiani M, Vázquez-Gómez L (2014) Catalytic partial oxidation of methane over nanosized Rh catalyst supported on Fecralloy foams. Int J Hydrogen Energy 39:11473–11485

    Article  CAS  Google Scholar 

  18. Vázquez-Gómez L, Cattarin S, Comisso N, Guerriero P, Musiani M, Verlato E (2012) Spontaneous deposition of Pd onto Fe-Cr-Al alloys. Electrochim Acta 68:114–122

    Article  Google Scholar 

  19. Cimino S, Gerbasi R, Lisi L, Mancino G, Musiani M, Vázquez-Gómez L, Verlato E (2013) Oxidation of CO and CH4 on Pd-Fecralloy foam catalysts prepared by spontaneous deposition. Chem Eng J 230:422–431

    Article  CAS  Google Scholar 

  20. Verlato E, Cattarin S, Comisso N, Gambirasi A, Musiani M, Vázquez-Gómez L (2012) Preparation of Pd-modified Ni foam electrodes and their use as anodes for the oxidation of alcohols in basic media. Electrocatal 3:48–58

    Article  CAS  Google Scholar 

  21. Cimino S, Lisi L, Mancino G, Musiani M, Vázquez-Gómez L, Verlato E (2012) Catalytic partial oxidation of CH4-H2 mixtures over Ni foams modified with Rh and Pt. Int J Hydrogen Energy 37:17040–17051

    Article  CAS  Google Scholar 

  22. Fiameni S, Herraiz-Cardona I, Musiani M, Pérez-Herranz V, Vázquez-Gómez L, Verlato E (2012) The HER in alkaline media on Pt-modified three-dimensional Ni cathodes. Int J Hydrogen Energy 37:10507–10516

    Article  CAS  Google Scholar 

  23. Verlato E, Cattarin S, Comisso N, Mattarozzi L, Musiani M, Vázquez-Gómez L (2013) Reduction of nitrate ions at Rh-modified Ni foam electrodes. Electrocatal 4:203–211

    Article  CAS  Google Scholar 

  24. Woods R (1976) Chemisorption at electrodes: hydrogen and oxygen on noble metals and their alloys. In: Bard AJ (ed) Electroanalytical chemistry. Marcel Dekker, New York, pp 1–162

    Google Scholar 

  25. Sattar MA, Conway BE (1969) Electrochemistry of the nickel-oxide electrode—VI. Surface oxidation of nickel anodes in alkaline solution. Electrochim Acta 14:695–710

    Article  CAS  Google Scholar 

  26. Verlato E, Cattarin S, Comisso N, Mattarozzi L, Musiani M, Vázquez-Gómez L (2015) EIS study of the preparation of electrocatalysts through galvanic displacement reactions. J Electroanal Chem 737:100–107

    Article  CAS  Google Scholar 

  27. Bianchini C, Shen PK (2009) Palladium-based electrocatalysts for alcohol oxidation in half cells and in direct alcohol fuel cells. Chem Rev 109:4183–4206

    Article  CAS  Google Scholar 

  28. Trasatti S (1992) Electrocatalysis of hydrogen evolution: progress in cathode activation. In: Gerischer H, Tobias CW (eds) Advances in electrochemical science and engineering. VCH, Weinheim, pp 1–85

    Google Scholar 

  29. Rosca V, Duca M, de Groot MT, Koper MTM (2009) Nitrogen cycle electrocatalysis. Chem Rev 109:2209–2244

    Article  CAS  Google Scholar 

  30. Pierozynski B, Mikolajczyk T, Turemko M (2015) On the temperature performance of ethanol oxidation reaction at palladium-activated nickel foam. Electrocatal 6:51–59

    Article  CAS  Google Scholar 

  31. Vázquez-Gómez L, Cattarin S, Guerriero P, Musiani M (2008) Hydrogen evolution on porous Ni cathodes modified by spontaneous deposition of Ru or Ir. Electrochim Acta 53:8310–8318

    Article  Google Scholar 

  32. Brylev O, Sarrazin M, Roué L, Bélanger D (2007) Nitrate and nitrite electrocatalytic reduction on Rh-modified pyrolytic graphite electrodes. Electrochim Acta 52:6237–6247

    Article  CAS  Google Scholar 

  33. Mattarozzi L, Cattarin S, Comisso N, Guerriero P, Musiani M, Vázquez-Gómez L, Verlato E (2013) Electrochemical reduction of nitrate and nitrite in alkaline media at CuNi alloy electrodes. Electrochim Acta 89:488–496

    Article  CAS  Google Scholar 

  34. Ribeiro FH, Chow M, Dalla Betta RA (1994) Kinetics of the complete oxidation of methane over supported palladium catalysts. J Catal 146:537–544

    Article  CAS  Google Scholar 

  35. Cimino S, Mancino G, Lisi L (2013) Sulphur tolerance of a P-doped Rh/γ-Al2O3 catalyst during the partial oxidation of methane to syngas. Applied Catal B 138–139:342–352

    Article  Google Scholar 

Download references

Acknowledgments

The authors acknowledge the financial support of the Italian Ministry for Economic Development (MiSE-CNR Agreement on National Electrical System). They are indebted to Dr. Simona Barison and Dr. Paolo Guerriero, IENI CNR Padova, for recording SEM images.

Author information

Authors and Affiliations

  1. IENI - CNR, C.so Stati Uniti 4, 35127, Padua, Italy

    M. Musiani, S. Cattarin, N. Comisso, L. Mattarozzi, L. Vázquez-Gómez & E. Verlato

  2. IRC - CNR, P.le V. Tecchio 80, 80125, Naples, Italy

    S. Cimino

Authors
  1. M. Musiani
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Cattarin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Cimino
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. N. Comisso
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. L. Mattarozzi
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. L. Vázquez-Gómez
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. E. Verlato
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. Musiani.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Musiani, M., Cattarin, S., Cimino, S. et al. Preparation of 3D electrocatalysts and catalysts for gas-phase reactions, through electrodeposition or galvanic displacement. J Appl Electrochem 45, 715–725 (2015). https://doi.org/10.1007/s10800-015-0808-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10800-015-0808-1

Keywords

Search

Navigation