Erratum to: Fire Technology DOI: 10.1007/s10694-014-0408-3

The dimensions given in Figures 1 and 2 in the original publication contain errors. These errors are corrected in this erratum.

Figure 1
figure 1

Section drawing of the building

Full size image
Figure 2
figure 2

Floor plan with location of openings and equipment

Full size image

The tests were performed in an apartment on the first floor located 3 m above ground level. The walls in the experimental setup were made of lightweight concrete (blocks) with a cement-based coating and with a total thickness of approximately 300 mm. The dimensions in Figures 1 and 2 in this erratum are given from enclosure surface to enclosure surface (i.e. the thickness of walls are not included).