Erratum to: Hydrogeology Journal (2016)
DOI 10.1007/s10040-016-1510-z
The correct version of Figure 1 is shown here. Note Figure 1a now correctly depicts the Borden aquifer sand.
a Grain-size curve for the well-sorted Borden aquifer sand as reported by Thomson et al. (2007). b Hydraulic conductivity estimates from the 15 HydrogeoSieveXL equations from v. 2.1 and v. 2.2 (invoking the d m and n e recommended values in the Comment) compared to the field measured values of hydraulic conductivity. c Grain-size curve for the weakly sorted aquifer at Woodstock, Ontario, as reported by Schillig (2012). d Hydraulic conductivity estimates from the 15 HydrogeoSieveXL equations from v. 2.1 and v. 2.2 (invoking the d m and n e recommended values in the Comment) compared to the field estimated values back-calculated from tracer tests, hydraulic head measurements and Darcy’s Law (Critchley et al. 2014)
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at http://dx.doi.org/10.1007/s10040-016-1510-z.
Rights and permissions
About this article
Cite this article
Devlin, J.F. Erratum to: Reply to Comment on “HydrogeoSieveXL: an Excel-based tool to estimate hydraulic conductivity from grain-size analysis”: technical note published in Hydrogeology Journal (2015) 23: 837–844, by J. F. Devlin. Hydrogeol J 25, 597–598 (2017). https://doi.org/10.1007/s10040-016-1529-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10040-016-1529-1