Abstract
A polypyrrole (PPy) film containing dodecyl sulfonate (SDS) as an organic counter ion and primary phosphate as an inorganic counter ion was electrodeposited on a stainless steel wire. The process was carried out under a constant deposition potential of 1.5 V that was applied to an aqueous solution containing pyrrole monomer, SDS and phosphate ions in varying concentrations. Films (with thicknesses 66 μm) were synthesized in the presence and absence of phosphate ions, and their surfaces were characterized by scanning electron microscopy. The surface structure of the PPy–SDS–H2PO4 − film compared to films made from PPy-SDS only or PPy-phosphate only, are more porous and less smooth. The effects of counter ions and their weight ratios, of applied voltage and time for electrodeposition were optimized. The applicability of this unbreakable coating is demonstrated by headspace solid-phase micro extraction of selected chlorobenzenes from aqueous samples. Extraction temperature and time, ionic strength, desorption conditions and stirring rates were also optimized. Under optimum conditions and by a gas chromatography–mass spectrometry for separation and detection, the relative standard deviations for the determination of chlorobenzenes in distilled water spiked at a level of 30 ng L−1 were 3–8 % (for n = 3), the limits of detection are between 0.5 and 1 ng L−1, and the calibration plots cover the 2.5 to 1,000 ng L−1 range. The method was applied to the analysis of (spiked) water samples, and relative recoveries were found to range from 95 to 103 %.
Similar content being viewed by others
References
Belardi RG, Pawliszyn J (1989) The application of chemically modified fused silica fibres in the extraction of organics from water matrix samples and their rapid transfer to capillary columns. Water Pollut Res J Can 24:179–191
Zhang Z, Pawliszyn J (1995) Quantitative extraction using internally cooled solid phase micro extraction device with simultaneous heating of the sample. Anal Chem 67:34–43
Pawliszyn J (1999) Applications of Solid-Phase Micro extraction. Royal Society of Chemistry, UK
Qin Z, Bragg L, Ouyang G, Niri VH, Pawliszyn J (2009) Solid-phase micro extraction under controlled agitation conditions for rapid on-site sampling of organic pollutants in water. J Chromatogr A 1216:6979–6985
Azenha MA, Nogueira PJ, Silva AF (2006) Unbreakable solid-phase micro extraction fibers obtained by sol–gel deposition on titanium wire. Anal Chem 78:2071–2074
Budziak D, Martendal E, Carasek E (2008) New poly (ethylene glycol) solid-phase micro extraction fiber employing zirconium oxide electrolytically deposited onto a NiTi alloy as substrate for sol–gel reactions. J Chromatogr A 1198–1199:54–58
Iroh JO, Williams C (1999) Formation of thermally stable polypyrrole-naphthalene/benzene sulfonate-carbon fiber composites by an electrochemical process. Synth Met 99:1–8
Wang LX, Li XG, Yang YL (2001) Preparation, properties and applications of polypyrroles. React Funct Polym 47:125–139
Bagheri H, Babanezhad E, Khalilian F (2009) An interior needle electropolymerized pyrrole-based coating for headspace solid-phase dynamic extraction. Anal Chim Acta 634:209–214
Bagheri H, Mohammadi A (2003) Pyrrole-based conductive polymer as the solid-phase extraction medium for the preconcentration of environmental pollutants in water samples followed by gas chromatography with flame ionization and mass spectrometry detection. J Chromatogr A 1015:23–30
Sahin Y, Ercan B, Sahin M (2008) In situ electrochemical solid-phase extraction of anions and cations using polypyrrole and over oxidized sulfonated polypyrrole. Talanta 75:369–375
Svetlicic V, Schmidt AJ, Miller LL (1998) Conductometric sensors based on the hypersensitive response of plasticized polyaniline films to organic vapors. Chem Mater 10:3305–3307
Lakard B, Segut O, Lakard S, Herlem G, Gharbi T (2007) Potentiometric miniaturized pH sensors based on polypyrrole films. Sensors Actuators B 122:101–108
Liljegren G, Nyholm L (2003) Electrochemically controlled solid-phase micro extraction and preconcentration using polypyrrole coated microarray electrodes in a flow system. Analyst 128:232–236
Yu JCC, Lai EPC (2005) Polypyrrole modified stainless steel frits for on-line micro solid phase extraction of ochratoxin A. Anal Bioanal Chem 381:948–952
Sumida T, Wada Y, Kitamura T, Yanagida S (2000) Electrochemical preparation of acroporous polypyrrole films with regular arrays of interconnected spherical voids. Chem Commun 17:1613–1614
Iroh JO, Su W (2002) Adhesion of electrochemically formed polypyrrole coatings to low carbon steel. J Appl Polym Sci 85:2757–2763
Mohammadi A, Yamini Y, Alizadeh N (2005) Dodecylsulfate-dopedpolypyrrole film prepared by electrochemical fiber coating technique for headspace solid phase micro extraction of polycyclic aromatic hydrocarbons. J Chromatogr A 1063:1–8
Cheng FL, Zhang ML, Wang H (2005) Fabrication of polypyrrole nanowire and nanotube arrays. Sensors 5:245–249
Mehdinia A, Bashour F, Roohi F, Jabbari A (2012) A strategy to enhance the thermal stability of a nanostructured polypyrrole-based coating for solid phase micro extraction. Microchim Acta 177:301–308
Sakkopoulos S, Vitoratos E, Dalas E (1998) Conductivity degradation due to thermal aging in conducting polyaniline and polypyrrole. Synth Met 92:63–67
Sadki S, Schottland P, Brodie N, Sabouraud G (2000) The mechanisms of pyrrole electropolymerization. Chem Soc Rev 29:283–293
Skotheim TA (1986) Handbook of conducting polymers. vols. 1 and 2, 2nd ed. Marcel Dekker, New York
Bagheri H, Ayazi Z, Naderi M (2013) Conductive polymer-based micro extraction methods. Anal Chim Acta 767:1–13
Ming Z, Markus P, Beate G, Jurgen HJ (2002) Electropolymerization of pyrrole and electrochemical study of polypyrrole. 5. Controlled electrochemical synthesis and solid-state transition of well-defined polypyrrole variants. Phys Chem B 106:10065–10073
Qian R, Qiu J (1987) Electrochemically prepared polypyrroles from aqueous solutions. Polym J 19:157–172
Ge M, Wallace GG (1992) Ion exchange properties of polypyrrole. React Polym 18:133–140
Mollahosseini A, Noroozian E (2009) Polyphosphate-doped polypyrrole coated on steel fiber for the solid-phase micro extraction of organo chlorine pesticides in water. Anal Chim Acta 638:169–174
Aziz-Zanjani MO, Mehdinia A (2014) A review on procedures for the preparation of coatings for solid phase micro extraction. Microchim Acta 181:1169–1190
He Y, Wang Y, Lee HK (2000) Trace analysis of ten chlorinated benzenes in water by headspace solid-phase micro extraction. J Chromatogr A 847:149–154
Bagheri H, Aghakhani A (2011) Novel nanofibers coatings prepared by electro spinning technique for headspace solid-phase micro extraction of chlorobenzenes from environmental samples. Anal Methods 3:1284–1289
Grueiro-Noche G, Fernández Laespada M, Pérez Pavón J, Moreno Cordero B, Muniategui Lorenzo S (2013) Determination of chlorobenzenes in water samples based on fully automated micro extraction by packed sorbent coupled with programmed temperature vaporization-gas chromatography–mass spectrometry. Anal Bioanal Chem 405:6739–6748
Acknowledgments
The Research Council and Graduates School of Sharif University of Technology (SUT) are acknowledged for supporting the project.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
ESM 1
(PDF 211 kb)
Rights and permissions
About this article
Cite this article
Bagheri, H., Roostaie, A. & Allahdadlalouni, M. A polypyrrole film with dual counter ions as a highly efficient medium for headspace solid-phase extraction of chloro-organic compounds. Microchim Acta 182, 617–624 (2015). https://doi.org/10.1007/s00604-014-1368-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00604-014-1368-5