Abstract
Specific chemical environments step out in the industry objects. Portland cement composites (concrete and mortar) were impregnated by using the special polymerized sulfur and technical soot as a filler (polymer sulfur composite). Sulfur and technical soot was applied as the industrial waste. Portland cement composites were made of the same aggregate, cement and water. The process of special polymer sulfur composite applied as the industrial waste is a thermal treatment process in the temperature of about 150–155 \(^{\circ }\hbox {C}\). The result of such treatment is special polymer sulfur composite in a liquid state. This paper presents the plastic constants and coefficients of thermal expansion of special polymer sulfur composites, with isotropic porous matrix, reinforced by disoriented ellipsoidal inclusions with orthotropic symmetry of the thermoplastic properties. The investigations are based on the stochastic differential equations of solid mechanics. A model and algorithm for calculating the effective characteristics of special polymer sulfur composites are suggested. The effective thermoplastic characteristics of special polymer sulfur composites, with disoriented ellipsoidal inclusions, are calculated in two stages: First, the properties of materials with oriented inclusions are determined, and then effective constants of a composite with disoriented inclusions are determined on the basis of the Voigt or Rice scheme. A brief summary of new products related to special polymer sulfur composites is given as follows: Impregnation, repair, overlays and precast polymer concrete will be presented. Special polymer sulfur as polymer coating impregnation, which has received little attention in recent years, currently has some very interesting applications.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Bień, J., Hoła, J., Sadowski, Ł.: Modern NDT techniques in diagnostics of transport infrastructure concrete structures. J. Nondestruct. Test. Ultrason. 18(11), 1–10 (2013). http://www.ndt.net/search/link.php?id=14888&file=article/ndt-canada2013/content/papers/36_Sadowski_Rev1.pdf
Błaszczyński, T.Z.: The influence of crude oil products on RC structure destruction. Civ. Eng. Manag. 17(1), 146–156 (2011). doi:10.3846/13923730.2011.561522
Criado, M., et al.: Corrosion behaviour of coated steel rebars in carbonated and chloride-contaminated alkali-activated fly ash mortar. Prog. Org. Coat. 99, 11–22 (2016). doi:10.1016/j.porgcoat.2016.04.040
Czarnecki, L., Garbacz, A.: Evaluation of polymer coating-crack-bridging ability. International Colloquium “Industrial Floors”95, Esslingen (1995)
Czarnecki, L., Emmons, P.H.: Repair and protection of concrete structures [Naprawa i Ochrona Konstrukcji Betonowych]. Wydawnictwo Polski Cement, Kraków (2002) (in Polish)
Czarnecki, L.: Polymer concretes. Cement Wapno Beton XV/LXXVII(2), 63–85 (2010)
Czarnecki, L., Głodkowska, W., Wiackowska, A.: Model of compatibility of polymer composite—cement concrete (PC—CC) System. In: Cardon, A. H., Verchery, G. (eds.) Durability of Polymer Based Composite Systems for Structural Applications, pp. 484–493. Elsevier (1991)
Czarnecki, L., Woyciechowski, P.: Concrete carbonation as a limited process and its relevance to concrete cover thickness. ACI Mater. J. Am. Concr. Inst. 109(3), 275 (2012)
Fiertak, M.: Trwałość materiałów budowlanych poddanych działaniom środowiska chemicznego (2005)
Głodkowska, W., Kobaka, J.: Modelling of properties and distribution of steel fibres within a fine aggregate concrete. Constr. Build. Mater. 44, 645–653 (2013)
Gorzelańczyk, T., Hoła, J., Sadowski, Ł., Schabowicz, K.: Methodology of nondestructive identification of defective concrete zones in unilaterally accessible massive members. Civ. Eng. Manag. 19(6), 775–786 (2013). doi:10.3846/13923730.2013.812577
Hoła, J., Bień, J., Sadowski, Ł., Schabowicz, K.: Non-destructive and semi-destructive diagnostics of concrete structures in assessment of their durability. Bull. Pol. Acad. Sci. Tech. Sci. 63(1), 87–96 (2015). doi:10.1515/bpasts-2015-0010
Hoła, B., Schabowicz, K.: Estimation of earthworks execution time cost by means of artificial neural networks. Autom. Constr. 19(5), 570–579 (2010). doi:10.1016/j.autcon.2010.02.004
Hoła, J., Sadowski, Ł., Reiner, J., Stach, S.: Usefulness of 3D surface roughness parameters for nondestructive evaluation of pull-off adhesion of concrete layers. Constr. Build. Mater. 84, 111–120 (2015). doi:10.1016/j.conbuildmat.2015.03.014
Hoła, J., Sadowski, Ł., Schabowicz, K.: Nondestructive identification of delaminations in concrete floor toppings with acoustic methods. Autom. Constr. 20(7), 799–807 (2011). doi:10.1016/j.autcon.2011.02.002
Hoła, J., Książek, M.: Research on usability of sulphur polymer composite for corrosion protection of reinforcing steel in concrete. Arch. Civ. Mech. Eng. 9(1), 47–59. (2009) http://www.acme.pwr.wroc.pl/repository/230/online.pdf
Kamiński, M., Musiał, M., Ubysz, A.: Eigenfrequencies of the reinforced concrete beams—methods of calculations. J. Civ. Eng. Manag. 17(2), 278–283 (2011). doi:10.3846/13923730.2011.576812
Kruszyna, Maciej, Rychlewski, Jeremi: Influence of approaching tram on behaviour of pedestrians in signalised crosswalks in Poland. Accid. Anal. Prev. 55, 185–191 (2013)
Książek, M.: Use in the building cement composites impregnated with special polymerized sulfur. J. Build. Eng. 4, 255–267 (2015). doi:10.1016/j.jobe.2015.09.007
Książek, M.: The experimental research on properties, structures and applies polymer sulfur composites as the industrial waste material in the industry objects. Mater. Struct. 48(10), 3269–3278 (2015). doi:10.1617/s11527-014-0397-1
Książek, M.: The experimental research on special polymerized sulfur composite-impregnated concrete and cement mortar. J. Mater. Sci. Eng. 4, 160 (2015). doi:10.4172/2169-0022.1000160
Książek, M.: Biological corrosion of the sandstone of the quay of the river of Odra in Wrocław. Eng. Fail. Anal. 44, 338–344 (2014). doi:10.1016/j.engfailanal.2014.05.003
Książek, M.: The biocorrosion of city sewer collector impregnated special polymer sulfur binder—polymerized sulfur applied as the industrial waste material. Constr. Build. Mater. 68, 558–564 (2014). doi:10.1016/j.conbuildmat.2014.06.077
Książek, M.: The influence of penetrating special polymer sulfur binder—polymerized sulfur applied as the industrial waste material on concrete watertightness. Compos. Part B Eng. 62(62C), 137–142 (2014). doi:10.1016/j.compositesb.2014.02.027
Książek, M.: The evaluate tendencies of corrosion process for reinforcing steel when covered with special polymer sulfur coating. Eng. Fail. Anal. 39, 1–11 (2014). doi:10.1016/j.engfailanal.2014.01.005
Książek, M.: The experimental investigations of propriety and applies in the building special coating—sulphur polymer composite as the industrial waste material. Compos. Part B: Eng. 58(58C), 378–385 (2014). doi:10.1016/j.compositesb.2013.10.087
Książek, M.: City sewer collectors biocorrosion. Cent. Eur. J. Eng. 4(4), 398–407 (2014). doi:10.2478/s13531-013-0177-7
Książek, M.: The experimental research on properties, structures and applies polymer sulfur composites as the industrial waste material in the industry objects. Mater. Struct. RILEM. (2014). doi:10.1617/s11527-014-0397-1
Książek, M.: The intensity of corrosion processes influenced by tensile stress for reinforcing steel covered with sulphur polymer composite applied as industrial waste material. Compos. Part B Eng. 45(1), 1126–1132 (2013). doi:10.1016/j.compositesb.2012.04.072
Książek, M.: The experimental and innovative research on intensity of corrosion processes influenced by tensile stress for reinforcing steel covered with sulphur polymer composite applied as industrial waste material. Adv. Sci. Lett. 19(1), 247–251 (2013). doi:10.1166/asl.2013.4652
Książek, M.: Experimental research on the surface protection of concrete by polymer sulfur composite. Mag. Concr. Res. 64(10), 945–955 (2012). doi:10.1680/macr.11.00142
Książek, M.: The experimental and innovative research on usability of sulphur polymer composite for corrosion protection of reinforcing steel and concrete. Compos. Part B Eng. 42(5), 1084–1096 (2011). doi:10.1016/j.compositesb.2011.03.022
Książek, M.: The experimental research on polarization of tensioned rebars coated with sulphur polymer composite. In: 10th Youth Symposium on Experimental Solid Mechanics, Chemnitz, 25th–28th, May 2011, Chemnitz University of Technology. Institute of Mechanics and Thermodynamics. Department of Solid Mechanics, pp. 67–68 (2011)
Książek, M.: Experimental research of the intensity of corrosion processes influence by tensile stress for reinforcing steel covered with polymer sulphur composites. In: Concrete Solutions: Proceedings of Concrete Solutions. 4th International Conference on Concrete Repair, Dresden, Germany, 26–28 September 2011, pp. 257–265 (2012)
Książek, M.: The mechanical destruction of sulphur composites [Niszczenie mechaniczne kompozytów siarkowych]. Prace Naukowe Instytutu Budownictwa Politechniki Wroclawskiej, ISSN 03249875(80), 105–112 (2001)
Książek, M.: The sulphur binders—their potential possibilities of using in buildings [Spoiwa siarkowe - Ich potencjalne możliwości zastosowań w budownictwie]. Prace Naukowe Instytutu Budownictwa Politechniki Wroclawskiej, ISSN: 03249875, Issue 75, CONFERENCE NO. 26, pp. 77–78 (1999)
Lowińska-Kluge, A., Błaszczyńskin, T.: The influence of internal corrosion on the durability of concrete. Arch. Civ. Mech. Eng. 12(2), 219–227 (2012). doi:10.1016/j.acme.2012.03.002
Łukowski, P.: Rola polimerów w kształtowaniu właściwości spoiw i kompozytów polimerowo-cementowych. Prace Naukowe Politechniki Warszawskiej. Budownictwo 148, 3–159 (2008)
Madryas, C.: Forensic investigations of buried utilities failures in Poland. Tunn. Undergr. Sp. Technol. 23(2), 199–205 (2008)
Maksymowicz, M., Cruz, P.J.S., Bień, J.: Load capacity of damaged RC slab spans of railway-bridges. Arch. Civ. Mech. Eng. 11(4), 963–978 (2011)
Nazarenko, L.V.: Investigation of effective thermoelastic properties of stochastic composite materials. ISSN: 03249875, Issue 75. CONFERENCE NO. 26, 115–122 (1999)
Sadowski, L., Nikoo, M.: Corrosion current density prediction in reinforced concrete by imperialist competitive algorithm. Neural Comput. Appl. 25(7–8), 1627–1638 (2014). doi:10.1007/s00521-014-1645-6
Sikora, Paweł, et al.: The effect of nanosilica on the mechanical properties of polymer-cement composites (PCC). Proc. Eng. 108, 139–145 (2015)
Thomas, C., et al.: Influence of recycled aggregates containing sulphur on properties of recycled aggregate mortar and concrete. Compos. Part B Eng. 45(1), 474–485 (2013). doi:10.1016/j.compositesb.2012.05.019
Trapko, T.: Fibre reinforced cementitious matrix confined concrete elements. Mater. Des. 44, 382–391 (2013). doi:10.1016/j.matdes.2013.09.008
Zhang, P.-H., He, J.-J., Zhang, D.-D., Wu, L.-M.: A fault diagnosis method for substation grounding grid based on the square-wave frequency domain model. Metrology and Measurement System 19(1), 63–71 (2012). doi:10.2478/v10178-012-0005-z
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by Andreas Öchsner.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Książek, M. The analysis of thermoplastic characteristics of special polymer sulfur composite. Continuum Mech. Thermodyn. 29, 11–29 (2017). https://doi.org/10.1007/s00161-016-0516-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00161-016-0516-z