Abstract
The process of creating special polymerized sulfur composites through application of industrial waste material is a thermal treatment process in the temperature of about 150–155 \(^{\circ }\hbox {C}\). The result of such treatment is a special polymerized sulfur composite in a liquid state. This paper presents the effective plastic constants and coefficients of thermal expansion of stochastic special polymer sulfur composites, with isotropic porous matrix, reinforced by disoriented ellipsoidal inclusions with orthotropic symmetry of the thermoplastic properties. The investigations are based on the stochastic differential equations of solid mechanics. A model and algorithm for calculating the effective characteristics of special polymer sulfur composites are suggested. The effective thermoplastic characteristics of special polymer sulfur composites, with disoriented ellipsoidal inclusions, are calculated in two stages: First, the properties of materials with oriented inclusions are determined, and then, effective constants of a composite with disoriented inclusions are determined on the basis of the Voigt or Rice scheme. In this paper, the review of the literature has been done, among other things, about selecting and using special polymerized sulfur coating in buildings, about the methods of surface protection against corrosion of concretes, and about the methods of the evaluation of the protection layer on these materials. Special polymerized sulfur as polymer coating impregnation, which has received little attention in recent years, currently has some very interesting applications. An innovative overlay for use in areas where freezing and thawing are prevalent has been developed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Czarnecki, L., Garbacz, A.: Evaluation of polymer coating-crack-bridging ability. International Colloquium “Industrial Floors” 95, Esslingen (1995)
Hoła, J., Książek, M.: Research on usability of sulphur polymer composite for corrosion protection of reinforcing steel in concrete. Arch. Civ. Mech. Eng. 9(1), 47–59 (2009). http://www.acme.pwr.wroc.pl/repository/230/online.pdf
Hoła, J., Schabowicz, K.: New technique of nondestructive assessment of concrete strength using artificial intelligence. NDT & E Int. 38(4), 251–259 (2005)
Kamiński, M., Musiał, M., Ubysz, A.: Eigenfrequencies of the reinforced concrete beams—methods of calculations. J. Civ. Eng. Manag. 17(2), 278–283 (2011). http://www.tandfonline.com/doi/abs/10.3846/13923730.2011.576812
Książek, M.: Use in the building cement composites impregnated with special polymerized sulfur. J. Build. Eng. 4, 255–267 (2015). doi:10.1016/j.jobe.2015.09.007
Książek, M.: The experimental research on properties, structures and applies polymer sulfur composites as the industrial waste material in the industry objects. Mater. Struct. 48(10), 3269–3278 (2015). doi:10.1617/s11527-014-0397-1
Książek, M.: The experimental research on special polymerized sulfur composite-impregnated concrete and cement mortar. J. Mater. Sci. Eng. 4, 160 (2015). doi:10.4172/2169-0022.1000160
Książek, M.: Biological corrosion of the sandstone of the quay of the river of Odra in Wrocław. Eng. Fail. Anal. 44, 338–344 (2014). doi:10.1016/j.engfailanal.2014.05.003
Książek, M.: The biocorrosion of city sewer collector impregnated special polymer sulfur binder—polymerized sulfur applied as the industrial waste material. Constr. Build. Mater. 68, 558–564 (2014). doi:10.1016/j.conbuildmat.2014.06.077
Książek, M.: The influence of penetrating special polymer sulfur binder—polymerized sulfur applied as the industrial waste material on concrete watertightness. Compos. Part B Eng. 62(62C), 137–142 (2014). doi:10.1016/j.compositesb.2014.02.027
Książek, M.: The evaluate tendencies of corrosion process for reinforcing steel when covered with special polymer sulfur coating. Eng. Fail. Anal. 39, 1–11 (2014). doi:10.1016/j.engfailanal.2014.01.005
Książek, M.: The experimental investigations of propriety and applies in the building special coating—sulphur polymer composite as the industrial waste material. Compos. Part B Eng. 58(58C), 378–385 (2014). doi:10.1016/j.compositesb.2013.10.087
Książek, M.: City sewer collectors biocorrosion. Central Eur. J. Eng. 4(4), 398–407 (2014). doi:10.2478/s13531-013-0177-7
Książek, M.: The experimental research on properties, structures and applies polymer sulfur composites as the industrial waste material in the industry objects. Mater. Struct. RILEM (2014). doi:10.1617/s11527-014-0397-1
Książek, M.: The intensity of corrosion processes influenced by tensile stress for reinforcing steel covered with sulphur polymer composite applied as industrial waste material. Compos. Part B Eng. 45(1), 1126–1132 (2013). doi:10.1016/j.compositesb.2012.04.072
Książek, M.: The experimental and innovative research on intensity of corrosion processes influenced by tensile stress for reinforcing steel covered with sulphur polymer composite applied as industrial waste material. Adv. Sci. Lett. 19(1), 247–251 (2013). doi:10.1166/asl.2013.4652
Książek, M.: Experimental research on the surface protection of concrete by polymer sulfur composite. Mag. Concrete Res. 64(10), 945–955 (2012). doi:10.1680/macr.11.00142
Książek, M.: The experimental and innovative research on usability of sulphur polymer composite for corrosion protection of reinforcing steel and concrete. Compos. Part B Eng. 42(5), 1084–1096 (2011). doi:10.1016/j.compositesb.2011.03.022
Książek, M.: The experimental research on polarization of tensioned rebars coated with sulphur polymer composite. In: 10th Youth Symposium on Experimental Solid Mechanics, Chemnitz, 25th–28th May 2011. Institute of Mechanics and Thermodynamics, pp. 67–68. Department of Solid Mechanics, Chemnitz University of Technology (2011)
Książek, M.: Experimental research of the intensity of corrosion processes influence by tensile stress for reinforcing steel covered with polymer sulphur composites. In: Concrete Solutions: Proceedings of Concrete Solutions. 4th International Conference on Concrete Repair, Dresden, Germany, 26–28 September 2011, pp. 257–265 (2012)
Książek, M.: The mechanical destruction of sulphur composites [Niszczenie mechaniczne kompozytów siarkowych]. Prace Naukowe Instytutu Budownictwa Politechniki Wroclawskiej 03249875(80), 105–112 (2001)
Książek M., The sulphur binders - Their potential possibilities of using in buildings [Spoiwa siarkowe - Ich potencjalne możliwości zastosowań w budownictwie]. Prace Naukowe Instytutu Budownictwa Politechniki Wroclawskiej, ISSN: 03249875, Issue 75, CONFERENCE NO. 26, pp. 77–78 (1999)
Ramli, M., Amin, A.T.: Porosity, pore structure and water absorption of polymer-modified mortars: an experimental study under different curing conditions. Compos. Part B Eng. 55, 221–233 (2013). doi:10.1016/j.compositesb.2013.06.022
Vlahović, M.M., Jovanić, P.B., Martinović, S.P., Boljanac, T.D., Volkov-Husović, T.D.: Quantitative evaluation of sulfur-polymer matrix composite quality. Compos. Part B Eng. 44(1), 458–466 (2013). doi:10.1016/j.compositesb.2012.04.005
Nazarenko, L.V.: Models of coupled deformation and microdamaging of anisotropic composite materials of stochastic structure. DSci Thesis, 2009, S.P.Timoshenko Institute of Mechanics of the National Academy of Sciences of Ukraine, Kyiv
Nazarenko, L.V.: Thermoelasticity of matrix composite with disoriented orthotropic inclusions. In: Nazarenko, L.V. (ed) Proceedings of 7th International Conference Modern Building Materials, Structures and Techniques, Vilnius, Lithuania, pp. 322–324 (2001)
Nazarenko, L.V.: Investigation of effective thermoelastic properties of stochastic composite materials, ISSN: 03249875, Issue 75. CONFERENCE NO. 26, 115–122 (1999)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Książek, M. The research on thermoplastic properties cement composites impregnated with the waste of sulfur. Acta Mech 228, 31–48 (2017). https://doi.org/10.1007/s00707-016-1692-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-016-1692-4