Abstract
A novel nanocomposite of rigid polyurethane foam was prepared by the polymerization of a sucrose-based polyol, a glycerol-based polyol and polymeric methylene diphenyl diisocyanate in the presence of cellulose whiskers. The cell morphology of the resulting foams was examined by scanning electron microscopy which showed both the pure foam and the nanocomposite foam had homogeneous cell dispersion and uniform cell size of approximately 200 μm. Analysis of the foams by Fourier transform infrared (FT-IR) spectroscopy indicated that both samples exhibited signals attributed to the polyurethane including the NH stretching and bending vibrations at 3320 cm−1 and 1530 cm−1, the OC=O vibration at 1730 cm−1 and the CO-NH vibration at 1600 cm−1. FT-IR analysis of the nanocomposite indicated that cellulose whiskers were crosslinked with the polyurethane matrix as the signal intensity of the OH stretch at 3500 cm−1 was significantly reduced in comparison to the spectral data acquired for a control sample prepared from the pure polyurethane foam mixed with cellulose whiskers. According to ASTM standard testing procedures, the tensile modulus, tensile strength and yield strength of the nanocomposite foam were found to be improved by 36.8%, 13.8% and 15.2%, and the compressive modulus and strength were enhanced by 179.9% and 143.4%, respectively. Dynamic mechanical analysis results testified the improvements of mechanical properties and showed a better thermal stability of the nanocomposite foam.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
D. Klemm, B. Heublein, H. P. Fink and A. Bohn, Angew. Chem. Int. Ed. 44, 3358 (2005). doi:10.1002/anie.200460587.
J. G. Zhang, T. J. Elder, Y. Pu and A. J. Ragauskas, Carbohydr. Polym. 69, 607 (2007). doi:10.1016/j.carbpol.2007.01.019.
X. D. Cao, H. Dong and C. M. Li, Biomacromol. 8, 899 (2007). doi:10.1021/bm0610368.
S. Harbaugh, N. K. Loughnane, M. Davidson, L. Narayanan, S. Trott, Y. G Chushak and M. O. Stone, Biomacromol. 6, 1055 (2005). doi:10.1021/bm049291k.
M. A. S. A Samir, F. Alloin and A. Dufresne, Biomacromol. 6, 612 (2005). doi:10.1021/bm0493685.
N. E. Marcovich, M. L. Auad, N. E. Bellesi, S. R. Nutt and M. I. Aranguren, J. Mater. Res. 21, 870 (2006). doi:10. 1557/jmr.2006.0105.
Y. Pu, J. Zhang, T. Elder, Y. Deng, P. Gatenholm and A. J. Ragauskas, Compos. Part B 38, 360 (2007). doi:10.1016/j.compositesb.2006.07.008.
M. A. S. A. Samir, F. Alloin, J. Y. Sanchez, N. E. Kissi and A. Dufresne, Macromolecules 37, 1386 (2004). doi:10.1021/ma030532a.
M. O. Seydibeyoglu and K. Oksman, Compos. Sci. Technol. 68, 908 (2008). doi:10.1016/j.compscitech.2007.08.008.
G. Siqueira, J. Bras and A. Dufresne, Biomacromolecules 10, 425 (2009).
D. Randall, S. Lee, The Polyurethanes Book, Huntsman Polyurethanes, Belgium, 2002.
C. A. Cateto, M.F. Barreiro, A. E. Rodrigues and M. N. Belgacem, Ind. Eng. Chem. Res. 48, 2583 (2009). doi:10.1021/ie801251r.
T. U. Patro, G. Harikrishnan, A. Misra and D.V. Khakhar, Polym. Eng. Sci. 48, 1778 (2008). doi:10.1002/pen.21145.
Z. B. Xu, X. L. Tang, A. J. Gu and Z. P. Fang, J. Appl. Polym. Sci. 106, 439 (2007). doi:10.1002/app.26497.
I. Banik and M. M. Sain, J. Reinf. Plast. Comp. 27, 357 (2008). doi:10.1177/0731684407083955.
X. Cao, T. Widy, C. Macosko and L.J. Lee, Polymer 46, 775 (2005). doi:10.1016/j.polymer.2004.11.028.
I. Banik and M. M. Sain, J. Reinf. Plast. Comp. 27, 1515 (2008). doi:10.1177/0731684407086317.
I. Banik and M. M. Sain, J. Reinf. Plast. Comp. 27, 1745 (2008). doi:10.1177/0731684407081442.
M. C. Saha, M. E. Kabir and S. Jeelani, Mat. Sci. Eng. A 479, 213 (2008). doi:10.1016/j.msea.2007.06.060.
M. Modesti, A. Lorenzetti and S. Besco, Polym. Eng. Sci. 47, 1351 (2007). doi:10.1002/pen.20819.
S. B. Candanedo, M. Roman and D.G. Gray, Biomacromolecules 62, 1048 (2005). doi:10.1021/ bm049300p.
M. Thirumal, D. Khastgir, N. K. Singha, B. S. Manjunath and Y. P. Naik, J. Appl. Polym. Sci. 108, 1810 (2008). doi:10.1002/app.27712.
J. L. Rivera-Armenta, T. Heinze and A. M. Mendoza-Martinez, Eur. Polym. J. 40, 2803 (2004). doi:10.1016/j.eurpolymj.2004.07.015.
A. J. Birch. US Patent, 5451615, (1995).
E. A. Turi, Thermal Characterization of Polymeric Materials, Academic Press, New York, 1997.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, Y., Ren, H. & Ragauskas, A.J. Rigid polyurethane foam reinforced with cellulose whiskers: Synthesis and characterization. Nano-Micro Lett. 2, 89–94 (2010). https://doi.org/10.1007/BF03353624
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03353624