Abstract
The authors examined the problem of the effect of the mechanical characteristics of a unidirectional composite material and of winding methods on the position of the optimum reinforcement trajectories. The conditions are determined which the method of reinforcement of the material in designing a structure on the basis of the equal strength criterion with an allowance made for the elasticity of the binder taken into account should be satisfied. For a network glass-plastic cylindrical shell the optimum reinforcement angle is equal to approximately 56° and the deviation from this value results in a small increase of the shell thickness.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 12, pp. 78–85, December, 1993.
Rights and permissions
About this article
Cite this article
Romashov, Y.P., Sidorin, S.G. Effect of mechanical characteristics of a unidirection composite on the law of optimum reinforcement of fibrous composite materials. Strength Mater 25, 921–927 (1993). https://doi.org/10.1007/BF00774640
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00774640