Skip to main content
SpringerLink
Log in

Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites

  • Published:
Metallurgical and Materials Transactions A Aims and scope Submit manuscript

Abstract

The morphology, structure, and hardness variations of garnet reinforced EN AW6082 Al-alloy composites have been investigated. High-energy ball milling of EN AW6082 Al-alloy powder, with and without garnet reinforcement, was performed under argon atmosphere for various duration, i.e., up to 50 hours. The study aimed at exploring the role of alloying elements and hard reinforcement particles on the structural evolution at different stages of mechanical milling. The composite powders were characterized in terms of the morphological variation, microstructural evolution, and thermal stability. Conventional microindentation and nanoindentation measurements were carried out on the individual powders as well as composite particles to estimate the changes in the mechanical properties of the composites with milling time. The results reveal that incorporation of hard garnet particles hastens the milling effect and leads to significant improvement in hardness and modulus of unreinforced pure aluminum and aluminum alloy. This work has demonstrated the possibility of producing composites from industrial by-product, with properties better than those of aluminum alloys and aluminum-based composites.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

References

  1. K.K. Chawla: Composite Materials Science and Engineering, 1997, 2nd Ed., Springer, New York.

    Google Scholar 

  2. T.W. Clyne, P.J. Withers: An introduction to metal matrix composites, 1993, Cambridge university press, Cambridge.

    Book  Google Scholar 

  3. D.B. Miracle: Compos. Sci. Techno., 2005, vol. 65, pp. 2526--40.

    Article  Google Scholar 

  4. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus and W.S. Miller: Mater. Sci. Eng. A, 2000, vol. 280, pp. 102-7.

    Article  Google Scholar 

  5. D.J. Lloyd: Mater. Rev., 1994, vol. 39, pp. 1-23.

    Article  Google Scholar 

  6. J.M. Torralba, C.E. Da Costa and F. Velasco: J Mater. Process Technol., 2003, vol. 133, pp. 203-6.

    Article  Google Scholar 

  7. J.J. Sobczak and L. Drenchev: J Mater. Sci. Tech., 2013, vol. 29, pp. 297-316.

    Article  Google Scholar 

  8. L. Lu, M. O. Lai and C.W. Ng: Mater. Sci. Eng. A, 1998, vol. 252, pp. 203-11.

    Article  Google Scholar 

  9. S.A. Khadem, S. Nategh and H. Yoozbashizadeh: J Alloys Compd., 2011, vol. 509, pp.2221-26.

    Article  Google Scholar 

  10. B. Prabhu, C. Suryanarayana, L. An and R. Vaidyanathan: Mater. Sci. Eng. A, 2006, vol. 425, pp. 192-200.

    Article  Google Scholar 

  11. M. Khakbiz and F. Akhlaghi: J Alloys Compd., 2009, vol. 479, pp. 334-41.

    Article  Google Scholar 

  12. L.E.G. Cambronero, E. Sánchez, J.M. Ruiz-Roman and J.M. Ruiz-Prieto: J Mater. Process Technol., 2003, vol. 143-144, pp. 378-83.

    Article  Google Scholar 

  13. A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, B.K. Mishra and J. Eckert: J Alloys Compd., 2012, vol. 536, pp. S134-37.

    Article  Google Scholar 

  14. M.H. Lee, J.H Kim, J.S. Park, W.T. Kim, D.H. Kim: Mater. Sci. Forum, 2005, vol. 475, pp. 3427-30.

    Article  Google Scholar 

  15. F. Ali, S. Scudino, G. Liu, V.C. Srivastava, N.K. Mukhopadhyay, M. Samadi Khoshkhoo, K.G. Prashanth, V. Uhlenwinkel, M. Calin and J. Eckert: J Alloys Compd., 2012, vol. 536, pp. S130-33.

    Article  Google Scholar 

  16. R. Perez-Bustamante, I. Estrada-Guel, W. Antunez-Flores, M. Miki-Yoshida, P. J. Ferreira and R. Martinez-Sanchez: J Alloys Compd., 2008, vol. 450, pp. 323-26.

    Article  Google Scholar 

  17. E. Rodrigues de Araujo, S.J. Ferreira Alves, F.A. Filho, S.L. Urtiga Filho, and O. Olimpio de Araujo Filho: Eighth International Latin American Conference on Powder Technology, Costao do Santinho, Florianopolis, SC, Brazil, 2011, pp. 325–30.

  18. K.H.W. Seah, M. Krishna, V.T. Vijayalakshmi, and J. Uchil: Corrosion Science, 2002, vol. 44, pp. 917-25.

    Article  Google Scholar 

  19. S.C. Sharma: Wear, 2001, vol. 249, pp. 1036-45.

    Article  Google Scholar 

  20. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22-31.

    Article  Google Scholar 

  21. W.C. Oliver and G.M. Pharr: J Mater. Res., 2004, vol. 19, pp. 3-20.

    Article  Google Scholar 

  22. R. Deaquino-Lara, I. Estrada-Guel, G. Hinojosa-Ruiz, R. Flores-Campos, J. M. Herrera-Ramirez and R. Martinez-Sanchez: J Alloys Compd., 2011, vol. 509S, pp. S284-89.

    Article  Google Scholar 

  23. S. Sivasankaran, K. Sivaprasad, R. Narayanasamy and V. Kumar Iyer: J. Alloys Compd., 2010, vol. 491, pp. 712-21.

    Article  Google Scholar 

  24. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1-184.

    Article  Google Scholar 

  25. J.R. Ares and F. Cuevas: Acta Mater., 2005, vol. 53, pp. 2157-67.

    Article  Google Scholar 

  26. M. Delshad Chermahinia, S. Sharafia, H. Shokrollahi, M. Zandrahimia, and A. Shafyei: J. Alloys Compd. 2009, vol. 484, pp. 54–58.

    Article  Google Scholar 

  27. S.S. Razavi Tousi, R. Yazdani Rad, E. Salahi, I. Mosbasherpour and M. Razavi: Powder Technol. 2009, vol. 192, pp. 346–51.

    Article  Google Scholar 

  28. N. Zhao, P. Nash and X. Yang: J Mater. Process Technol., 2005, vol. 170, pp. 586-92.

    Article  Google Scholar 

  29. L. Wang and F.S. Li: J Magn. Magn. Mater., 2001, vol. 223, pp. 233-37.

    Article  Google Scholar 

  30. B. Lonnberg: J Mater. Sci., 1994, vol. 29, pp. 3224-30.

    Article  Google Scholar 

  31. H.J. Fecht: Nanostructured Mater., 1995, vol. 6, pp. 33-42.

    Article  Google Scholar 

  32. W.Qin, Z.H. Chen, P.Y. Huang, Y.H. Zhuang: J Alloys Compd., 1999, vol. 292, pp. 230-32.

    Article  Google Scholar 

  33. J.B. Fogognolo, F. Velasco, M.H. Robert, and J.M. Torralba: Mater. Sci. Eng. A, 2003, vol. 342, pp. 131-43.

    Article  Google Scholar 

  34. Z. Razavi Hesabi, A. Simchi and S.M. Seyed Reihani: Mater. Sci. Eng. A, 2006, vol. 428, pp. 159–68.

    Article  Google Scholar 

  35. A. Santos-Beltrán, V. Gallegos-Orozco and I. Estrada-Guel: J Alloy Compd., 2006, vol. 435, pp. 514-17.

    Google Scholar 

  36. K.D. Woo and H.W. Huo: Metals and Mater. Inter., 2006, vol. 12, pp. 45-50.

    Article  Google Scholar 

  37. J.L. Hernandez R, J.J. Cruz R, C. Gomez, Y.O. Coreno A and R. Martinez-Sanchez: Mater. Transactions, 2010, vol. 51, pp. 1120-26.

    Article  Google Scholar 

  38. M. Azabou, M. Khitouni and A. Kolsi: Mater. Charact., 2009, vol. 60, pp. 499-505.

    Article  Google Scholar 

  39. R. Maiti and M. Chakraborty: J Alloys Compd., 2008, vol. 458, pp. 450-56.

    Article  Google Scholar 

  40. J. Safari, G.H. Akbari, A. Shahbazkhan and M. Delshad Chermahini: J Alloys Compd., 2011, vol. 509, pp. 9419-24.

    Article  Google Scholar 

  41. M.F. Ashby: Phil. Mag., 1970, vol.21, pp. 399-424.

    Article  Google Scholar 

  42. L.M. Brown and R.K. Ham: Strengthening Methods in Crystals, Elsevier, Amsterdam, 1971, pp. 9-135.

    Google Scholar 

  43. E.O. Hall: Proc Phys Soc (London), 1951, vol. B64: pp. 747-53.

    Article  Google Scholar 

  44. N.J. Petch: Cleavage strength of polycrystals, J Iron Steel Inst., 1953, vol. 174: pp. 25–28.

    Google Scholar 

  45. D. Tabor: The hardness of metals, 1951, Oxford University Press, Oxford.

    Google Scholar 

  46. H. Abdoli, M. Ghanbari and S. Baghshahi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6702-07.

    Article  Google Scholar 

  47. Y.S. Sato, M. Urata, H. Kokawa and K. Ikeda: Mater. Sci. Eng. A, 2003, vol. 354, pp. 298-305.

    Article  Google Scholar 

  48. Z. Zhang and D. L. Chen: Scripta Mater., 2006, vol. 54, pp. 1321-26.

    Article  Google Scholar 

  49. Z. Zhang and D.L. Chen: Sci. and Technol. Advanced Mater., 2007, vol. 8, pp. 5-10.

    Article  Google Scholar 

  50. N. Ramakrishnan: Acta Mater., 1996, vol. 44, pp. 69-77.

    Article  Google Scholar 

  51. L.F. Mondolfo: Aluminium alloys: structure and properties. Butterworth, London, 1976.

    Google Scholar 

  52. S. Nayak, L. Riester and N.B. Dahotre: J Mater. Res., 2004, vol. 19, pp. 202-07.

    Article  Google Scholar 

  53. N.K Mukhopadhyay and P. Paufler: Intern. Mater. Rev., 2006, vol. 51, pp. 209-45.

    Article  Google Scholar 

Download references

Acknowledgments

The authors would like to thank Dr. A. Rajkumar, CSIR-NML Madras Centre, for providing the garnet powder and wish to express their gratitude to Dr. Ansu J. Kailath and Dr. Suman Kumari Mishra, CSIR-NML, Jamshedpur, for their valuable technical assistance.

Author information

Authors and Affiliations

  1. CSIR-National Metallurgical Laboratory, Jamshedpur, 831 007, India

    M. Raviathul Basariya (Doctoral Student) & V. C. Srivastava (Principal Scientist)

  2. Department of Metallurgical Engineering, Indian Institute of Technology (BHU), Varanasi, 221005, India

    M. Raviathul Basariya (Doctoral Student), V. C. Srivastava (Principal Scientist) & N. K. Mukhopadhyay (Professor)

Authors
  1. M. Raviathul Basariya
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. V. C. Srivastava
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. N. K. Mukhopadhyay
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to V. C. Srivastava.

Additional information

Manuscript submitted August 19, 2014.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Raviathul Basariya, M., Srivastava, V.C. & Mukhopadhyay, N.K. Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metall Mater Trans A 46, 1360–1373 (2015). https://doi.org/10.1007/s11661-014-2685-3

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11661-014-2685-3

Keywords

Search

Navigation