Abstract
Approximately 80% of the international transport of goods is carried on by means of ships. A large portion of the transport capacity is represented by Roll-on-Roll-off (RoRo) ships. Especially in Europe this is a relevant potential for the RoRo segment. Consequently, the design and construction of RoRo ships plays an increasing role for German shipyards and their suppliers. In order to make the loading and unloading procedure of trailer economically more competitive, ship owners would like to improve the lashing of trailers on the ship. On the basis of a multibody system formalism, a software tool has been developed which allows for an optimization of the loading of trailers on RoRo ships.
Similar content being viewed by others
References
Clauss, G., Hennig, J., Cramer, H., Krüger, S.: Development of safer ships by deterministic analysis of extreme roll motions in harsh seas. In: Proceedings of OMAE 2003, 22nd International Conference on Offshore Mechanics and Arctic Engineering (2003)
Clauss, G., Henning, J., Cramer, H., Brink, K.-E.: Validation of numerical motion simulations by direct comparison with time series from ship model tests in deterministic wave sequences. In: Proceedings of OMAE 2005, 24th International Conference on Offshore Mechanics and Arctic Engineering (2005)
Kreuzer, E.: Symbolische Berechnung der Bewegungsgleichungen von Mehrkörper-systemen. Fortschritt-Berichte der VDI-Zeitschriften, Reihe 11, Nr. 32. VDI, Düsseldorf (1979)
Kreuzer, E., Leister, G.: Programmsystem NEWEUL ’90. Anleitung AN-24. Institut für Mechanik, Stuttgart (1991)
Kreuzer, E., Schiehlen, W.: NEWEUL—software for the generation of symbolical equations of motion. In: Multibody System Handbook, pp. 181–202 (1990)
IMO: Resolution A.581 (14), Guidelines for securing arrangements for the transport of road vehicles on Ro-Ro ships. International Maritime Organization (1985)
IMO: Resolution A. 714(17), Code for safe practice for cargo stowing and securing. International Maritime Organization (1995)
IMO: IMO MSC/Circ. 745, Guidelines for the preparation of the cargo securing manual. International Maritime Organization (1997)
Dallinga, R.: Safe securing of trailers and deck cargo. In: International Conference on Marine Transport using Roll-on/Roll-off and Horizontal Handling Methods. Gothenburg (1994)
Turnbull, S.R., Dawson, D.: The securing of rigid semi-trailers on roll-on/roll-off ships. Int. J. Mech. Sci. 39, 1–14 (1997)
Turnbull, S.R., Dawson, D.: The dynamic behaviour of flexible semi-trailers on board ro–ro ship. Int. J. Mech. Sci. 41, 1447–1460 (1999)
Turnbull, S.R.: Roll-on/roll-off semi-trailer models: a comparison of results. Marine Sci. Technol. 5, 101–106 (2000)
Andersson, P.: Securing of road trailers on board Ro/Ro ships. Research Report. Sweden MariTerm AB, Göteborg (1983)
Schiehlen, W., Eberhard, P.: Technische Dynamik: Modelle fur Regelung und Simulation. Teubner, Stuttgart (2004)
Author information
Authors and Affiliations
Corresponding author
Additional information
Commemorative Contribution.
Rights and permissions
About this article
Cite this article
Kreuzer, E., Schlegel, V. & Stache, F. Multibody simulation tool for the calculation of lashing loads on RoRo ships. Multibody Syst Dyn 18, 73–80 (2007). https://doi.org/10.1007/s11044-007-9061-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11044-007-9061-7