A physical and mathematical model is proposed for description of the formation of microporosity in an alloy within the framework of the two-phase zone approximation with account for the real state diagram of the alloy. The formation of microporosity in an Al–Si melt in the process of its solidification as a result of the liberation of hydrogen from it was investigated in the self-similar approximation. The influence of the parameters of solidification of this alloy on the formation of a gas microporosity in it was analyzed.
Similar content being viewed by others
References
J. Campbell, Castings, Butterworth-Heinemann, Oxford (1991).
T. S. Piwonka and M. C. Flemings, Pore formation in solidification, Trans. AIME, 236, 1157–1165 (1966).
K. Kuboand and R. D. Pehlke, Mathematical modeling of porosity formation in solidification, Metall. Trans. B, 16B, 359–366 (1985).
V. A. Zhuravlev, V. M. Kolodkin, S. P. Bakumenko, and V. V. Okat’ev, On the mechanism of formation of pores in the crystallization of alloys, Izv. Akad. Nauk SSSR, Metally, No. 3, 61–65 (1986).
D. R. Poirier, K. Yeum, and A. L. Mapples, A thermodynamic prediction for microporosity. Formation on fluminum-rich Al–Cu alloys, Metall. Trans. A, 18A, 1979–1987 (1987).
J. Huang and J. G. Conley, Simulation of microporosity formation in modified and unmodified A356 alloy castings, Metall. Trans. B, 29B, 1249–1260 (1998).
S. Bounds, G. Moran, K. Pericleous, et al., A computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena, Metall. Trans. B, 31B, 515–527 (2000).
P. O. Lee and J. D. Hunt, Hydrogen porosity in directionally solidified aluminum–copper alloys: A mathematical model, Acta Mater., 49, 1383–1398 (2001).
Ch. Pequet, M. Gremaud, and M. Rappaz, Modeling of microporosity, macroporosity, and pipe shrinkage formation during the solidification of alloys using a mushy-zone refinement method: Applications to aluminum alloys, Metall. Trans. A, 33A, 2095–2106 (2002).
J. A. Taylor, G. B. Schaffer, and D. H. Stjohn, The role of iron in the formation of porosity in Al–Si–Cu based alloys — Part I: Initial experimental observations, Metall. Trans. A, 30A, 1643–1650 (1999).
H. Yin and J. N. Koster, Chemical stratification and solidification in a differently heated melt, ISIJ Int., 40, No. 4, 364–372 (2000).
P. O. Lee, A. Chirazi, and D. See, Modeling microporosity in aluminum–silicon alloys: a review, J. Light Met., 1, 15–30 (2001).
V. T. Borisov, The Theory of the Two-Phase Zone in a Metal Ingot [in Russian], Metallurgiya, Moscow (1987).
V. A. Zhuravlev, Solidification and Crystallization of Alloys with Heterojunctions [in Russian], RKhD, Moscow–Izhevsk (2006).
V. A. Zhuravlev, V. M. Kolodkin, and V. V. Vas’kin, Dynamics of the two-phase zone in metal alloys with chemical reactions, Izv. Akad. Nauk SSSR, Metally, No. 4, 64–68 (1983).
V. V. Vas’kin, Self-similar solution of the equation of double alloy crystallization, Izv. Akad. Nauk SSSR, Metally, No. 1, 83–87 (1986).
A. I. Saifutdinov, V. G. Lebedev, D. A. Fedosimov, Self-similar approximation for the process of formation of microporosity in alloys of light metals, in: Proc. 37 th Concluding Students Sci. Conf., Udmurtsk. Gos. Univ., Izhevsk (2009), pp. 55–58.
G. Couturier and M. Rappaz, Effect of volatile elements on porosity formation in solidifying alloys, Modell. Simul. Mater. Sci. Eng., 14, 253–271 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 86, No. 4, pp. 696–705, July–August, 2013.
Rights and permissions
About this article
Cite this article
Saifutdinov, I., Lebedev, V.G. Self-similar approximation for the process of formation of microporosity in alloys of light metals. J Eng Phys Thermophy 86, 743–753 (2013). https://doi.org/10.1007/s10891-013-0891-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10891-013-0891-2