Abstract
In statistical process control, an important issue in phase I is to identify the time of a change in process parameters. Control charts monitor the process over time, but the time an alarm is signaled by a control chart is not necessarily the real time of change in the process. Finding the real time of change, called as change point, is important because it leads to saving cost and time in detecting the assignable cause. Recently, profile monitoring in which a response variable and one or more explanatory variables are modeled by a regression function is attracted by many researchers. One type of profiles considered in the literature is a logistic profile where the distribution of the response variable is binary. In this paper, we develop two methods including likelihood ratio test and clustering to estimate the real time of a step change in phase I monitoring of the logistic profiles. The performance of the proposed methods is evaluated and compared through simulation studies. The results show the efficiency of both estimator methods. A real case is also studied to show the applicability of the proposed methods in practice.
Similar content being viewed by others
References
Stover FS, Brill RV (1998) Statistical quality control applied to ion chromatography calibrations. J Chromatogr A 804(1–2):37–43
Kang L, Albin SL (2000) On-line monitoring when the process yields a linear profile. J Qual Technol 32(4):418–426
Mahmoud MA, Woodall WH (2004) Phase I analysis of linear profiles with calibration applications. Technometrics 46(4):380–391
Gupta S, Montgomery DC, Woodall WH (2006) Performance evaluation of two methods for online monitoring of linear calibration profiles. Int J Prod Res 44(10):1927–1942
Mahmoud MA, Parker PA, Woodall WH (2007) A change point method for linear profile data. Qual Reliab Eng Int 23(2):247–268
Jensen WA, Birch JB, Woodall WH (2008) Monitoring correlation within linear profiles using mixed models. J Qual Technol 40(2):167–183
Amiri A, Zand A, Soudbakhsh D (2011) Monitoring simple linear profiles in the leather industry (a case study). Proceedings of the International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia
Woodall WH, Spitzner DJ, Montgomery DC, Gupta S (2004) Using control charts to monitor process and product quality profiles. J Qual Technol 36(3):309–320
Woodall WH (2007) Current research on profile monitoring. Producão 17(3):420–425
Noorossana R, Saghaei A, Amiri A (2011) Statistical analysis of profile monitoring. Wiley, New York
Pignatiello JJ, Samuel TR (2001) Estimation of the change point of a normal process mean in SPC applications. J Qual Technol 33(1):82–95
Timmer DH, Pignatiello JJ (2003) Change point estimates for the parameter of an AR (1) process. Qual Reliab Eng Int 19(4):355–369
Montgomery DC (2005) Introduction to statistical quality control, 5th edn. Wiley, New York
Perry MB, Pignatiello JJ (2006) Estimation of the change point of a normal process mean with a linear trend disturbance in SPC. Qual Technol Quant Manag 3(3):325–334
Zou C, Tsung F, Liu Y (2008) A change point approach for phase I analysis in multistage processes. Technometrics 50(3):344–356
Alaeddini A, Ghazanfari M, Aminnayeri M (2009) A hybrid fuzzy-statistical clustering approach for estimating the time of changes in fixed and variable sampling control charts. Inform Sci 179(11):1769–1784
Zarandi MHF, Alaeddini A (2010) A general fuzzy-statistical clustering approach for estimating the time of change in variable sampling control charts. Inform Sci 180(16):3033–3044
Noorossana R, Atashgar K, Saghaei A (2011) An integrated supervised learning solution for monitoring process mean vector. Int J Adv Manuf Technol 56(5–8):755–765
Amiri A, Allahyari S (2011) Change point estimation methods for control chart post-signal diagnostics: a literature review. Qual Reliab Eng Int 28(7):673–685
Zou C, Zhang Y, Wang Z (2006) A control chart based on a change-point model for monitoring linear profiles. IIE Trans 38(12):1093–1103
Zou C, Tsung F, Wang Z (2007) Monitoring general linear profiles using multivariate exponentially weighted moving average schemes. Technometrics 49(4):395–408
Mahmoud MA, Parker PA, Woodall WH, Hawkins DM (2007) A change point method for linear profile data. Qual Reliab Eng Int 23(2):247–268
Kazemzadeh RB, Noorossana R, Amiri A (2008) Phase I monitoring of polynomial profiles. Commun Stat Theory Methods 37(10):1671–1686
Eyvazian M, Noorossana R, Saghaei A, Amiri A (2011) Phase II. Monitoring of multivariate multiple linear regression profiles. Qual Reliab Eng Int 27(3):281–296
Sharafi A, Aminnayeri M, Amiri A (2012) Identifying the time of step change in binary profiles. To appear in The International Journal of Advanced Manufacturing Technology.
Yeh B, Huwang L, Li YM (2009) Profile monitoring for binary response. IIE Trans Qual Reliab Eng 41(11):931–941
Agresti A (2002) Categorical data analysis. Wiley, Hoboken
Ghazanfari M, Alaeddini A, Akhavan Niaki ST, Aryanezhad MB (2008) A clustering approach to identify the time of a step change in Shewhart control charts. Qual Reliab Eng Int 24(7):765–777
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zand, A., Yazdanshenas, N. & Amiri, A. Change point estimation in phase I monitoring of logistic regression profile. Int J Adv Manuf Technol 67, 2301–2311 (2013). https://doi.org/10.1007/s00170-012-4651-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-012-4651-9