Abstract
The kinetic spray coating process involves impingement of a substrate by particles of various material types at high velocities. In the process, particles are injected into a supersonic gas stream and accelerated to high velocities. A coating forms when the particles become plastically deformed and bond to the substrate and to one another upon collision with the substrate. Coating formation by the kinetic spray process can be affected by a number of process parameters. In the current study, several spray variables were investigated through computational modeling and experiments. The examined variables include the temperature and pressure of the primary gas, the cross-sectional area of the nozzle throat, the nozzle standoff distance from a substrate, and the surface condition of nozzle interior and the powder gas flow. Experimental verification on the effects of these variables was performed primarily using relatively large-size aluminum particles (63–90 µm) as the feedstock material. It was observed that the coating formation is largely controlled by two fundamental variables of the sprayed particles: particle velocity and particle temperature. The effects of different spray conditions on coating formation by the kinetic spray process can be generally interpreted through their influences on particle velocity and/or particle temperature. Though it is limited to accelerate large particles to high velocities using compressed air or nitrogen as carrier gas, increasing particle temperature provides an additional means that can effectively enhance coating formation by the kinetic spray process.
Similar content being viewed by others
References
A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, and M.M. Shushpanov, Gas Dynamics Spraying Method for Applying a Coating, US Patent No. 5 302 414, April 12, 1994
R.C. McCune, A.N. Papyrin, J.N. Hall, W.L. Riggs, and P.H. Zachowski, An Exploration of the Cold Gas-Dynamics Spray Method for Several Materials Systems, Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Ed., ASM International, 1995, p 105
R.C. McCune, W.T. Donlon, E.L. Cartwright, A.N. Papyrin, E.F. Rybicki, and J.R. Shadley, Thermal Spray: Practical Solutions for Engineering Problems, ASM International, 1996
R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, and S. Sampath, Impact of High Velocity Cold Spray Particles, J. Therm. Spray, Vol 8, 1999, p 559
R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Spray, J. Therm. Spray, Vol 7, 1998, p 205
T.H. VanSteenkiste, J.R. Smith, R.E. Teets, J.J. Moleski, and D.W. Gorkiewicz, Kinetic Spray Coating Method and Apparatus, US Patent No. 6 139 913, Oct. 31, 2000
T.H. VanSteenkiste, J.R. Smith, R.E. Teets, J.J. Moleski, and D.W. Gorkiewicz, Kinetic Spray Coating Apparatus, US Patent No. 6 283 386 B1, Sep. 4, 2001
T.H. VanSteenkiste, J.R. Smith, R.E. Teets, J.J. Moleski, and D.W. Gorkiewicz, R.P. Tison, D.R. Marantz, K.A. Kowalsky, W.L. Riggs, P.H. Zajchowski, B. Pilsner, R.C. McCune, and K.J. Barnett, Kinetic Spray Coatings, Surf. Coat. Technol., Vol 111, 1999, p 62
T.H. Van Steenkiste, J.R. Smith, and R.E. Teets, Aluminum Coatings via Kinetic Spray with Relatively Large Powder Particles, Surf. Coat. Technol., Vol 154, 2002, p 237
A.O. Tokarev, Structure of Aluminum Powder Coatings Prepared by Cold Gas Dynamic Spraying, Met. Sci. Heat Treat., Vol 38, 1996, p 136
D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Smith, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray, Vol 8, 1999, p 576
A.H. Shapiro, The Dynamics and Thermodynamics of Compressible Fluid Flow, The Ronald Press Company, New York, 1953
C.B. Henderson, Drag Coefficients of Sphers in Continuum and Rarefied Flows, AIAA J., Vol 14 (No. 6), 1976, p 707
D.J. Carlson and P.L. Chambre, Particle Drag and Heat Transfer in Rocket Nozzles, AIAA J., Vol 2, 1964, p 1980
FLUENT, “FLUENT 6.1 User’s Guide,” 10 Cavendish Court, Lebanon, NH
T. Stoltenhoff, H. Kreye, H.J. Richter, and H. Assadi, Optimization of the Cold Spray Process, Thermal Spray: New Surfaces for New Manufacturing, ASM International, 2001
B.E. Launder and D.B. Spalding, The Numerical Computation of Turbulent Flows, Computer Methods in Applied Mechanics and Engineering, Vol 3, 1974, p 269
R. J. Litchford, and S.M. Jeng, Efficient Statistical Transport Model for Turbulent Particle Dispersion in Sprays, AIAA J., Vol 29, 1991, p 1443
V.F. Kosarev, S.V. Klinkov, A.P. Alkhimov, and A.N. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Therm. Spray, Vol 12, 2003, p 265
L.F. Moody, ASME Trans., Vol 66, 1944, p 671
T. Cebeci and P. Bradshaw, Momentum Transfer in Boundary Layers, Hemisphere Publishing Corporation, 1977
A. Buch, Pure Metals Properties: A Scientific-Technical Handbook, ASM International, Materials Park, OH, and Freund Publishing House Ltd., 1999, p 242
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Han, T., Zhao, Z., Gillispie, B.A. et al. Effects of spray conditions on coating formation by the kinetic spray process. J Therm Spray Tech 14, 373–383 (2005). https://doi.org/10.1361/105996305X59369
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1361/105996305X59369