Abstract
This review examines some of the components of this increasingly exploited technology as well as the application of which will surely increase as a result of constant development in equipment design and extensive research in the field of ceramic and metal materials in general for the production of fully dense and reliable parts. Newly developed high temperature HIP equipment can offer potential improvements to material properties relative to more conventional techniques as a possible solution to the manufacture of ceramic and metal components for airframe and structural components where critical and highly stressed applications are required. By the use the near net shape techniques, exotic materials can be used more cost effectively than machining from solid. Designers and manufacturers alike can make better products by introducing HIP to their production route.
Similar content being viewed by others
References
S. KOFUNE, C. MANABE, T. FUJIKAWA, T. KANDA, F. YAMAMOTO and H. OKAWA,inProceedings of the 3rd International Conference on Hot Isostatic Pressing, London, UK, 10-12 Nov. 1986, edited by MPR Publishing Services Ltd. (1986) Vol. 1, p. 1.
G. ZIEGLER, J. HEINRICH and G. WOTTING, J. Mater. Sci. 22 (1987) 3041.
W. BRIAN JAMES, Mater. Design 8 (1987) 187.
F. X. ZIMMERMAN, Ceram. Ind. 148 (1998) 33.
S. MUSSMAN, Mater. World 7 (1999) 677.
http://www.aiphip.com, American Isostatic Presses, Inc. Technical Literature, Columbus, Ohio, 2002.
http://www.kobelco.co.jp, Kobe Steel, Ltd., Advanced Products &Technologies Dept. Machinery Company, Technical Literature, 2001.
http://www.nittan.co.jp, Nippon Tungsten Co., Ltd., Technical Literature, 2002.
T. FUJIKAWA, M. MORITOKI and K. HOMMA,in Papers Presented 2nd International Conference on Hot Isostatic Pressing, Stratford-upon-Avon, 21-23 Sept. 1982 (MPR Publishing, Shrewsbury, 1982) Vol. 1.
http:/www.vdww.com, Valenite Die &Wear/Walmet, Technical Literature, 2001.
M. J. HOFFMANN, A. GEYER and R. OBERACKER, J. Eur. Ceram. Soc. 19 (1999) 2359.
P. ARATO and F. WEBER, Key Eng. Mater. 161–163 (1998) 221.
Y. SHINODA, T. NAGANOand F. WAKAI, J. Amer. Ceram.Soc. 82 (1999) 771.
S. DONG, D. JIANG, S. TAN and J. GUO, J. Mater. Sci. Lett. 16 (1997) 1080.
Y. MANABE, T. FUJIKAWA and Y. NARUKAMA,inSecond International Conference on Hot Isostatic Pressing-Theory and Applications (7-9 June 1989), National Institute of Standards and Technology, Gaithersburg, Maryland USA (ASM International, Materials Park, OH, USA, 1991) p. 1.
A. G. SOLOMAH, Ceram. Eng. Sci. Proc. 18 (1997) 219.
M. YOSHINADA, K. HIROTA, M. ITO, H. AKANO and O. YAMAGUCH, J. Amer. Ceram. Soc. 82 (1999) 216.
M. MORITOKI,inConference of Hot Isostatic Pressing: AGloval Assesment, Danvers, March 30-April 1, 1982.
T. FUJIKAWA, M. MORITOKI, T. KANDA, K. HOMMA and H. OKADA,inProceedings of International Symposium on Ceramic Components for Engine, Japan, edited by Shiyeyuki Somiya, Eigo Kanai and Kenishiro Ando (KTK Scientific Publ. Tokyo, 1983) p. 425.
S. M. BARINOV, V. F. PONOMAREV and V. CHEVCHENKO, Refract. Ind. Ceram. 38 (1997) 9.
H. T. LARKER and R. LUNDBERG, J. Eur. Ceram. Soc. 19 (1999) 2367.
K. HOMMA, T. TATUNO, H. OKADA and T. FUJIKAWA,inProceedings of the Twentyfifth Japan Congress on Materials Research (Society of Materials Science, Kioto, Japan, 1982) p. 213.
S. YIN, S. UCHIDA, Y. FUJISHIRO, M. OHMORI and T. SATO, Br. Ceram. Trans. 98 (1999) 1923.
T. FUJIKAWAand N. KAWAI,in2nd International Conference on Hot Isostatic Pressing-Theory and Applications, National Institute of Standards and Technology, Gaithersburg, Maryland, USA 7-9 June 1989 (ASM International, Materials Park, OH, USA, 1991) p. 87.
A. ZULFIA, H. V. ATKINSON, H. JONES and S. KING, J. Mater. Sci. 34 (1999) 4305.
K. A. KHOR and Y. W. GU, Mater. Lett. 34 (1998) 263.
R. CHAIM and M. HEFETZ, J. Mater. Res. 13 (1998) 1875.
M. MIODOWNIK and B. DERBY, J. Amer. Ceram. Soc. 82 (1999) 3616.
J.-F. YANG, Y.-H. CHOA, J. P. SINGH and K. NIIHARA, J. Ceram. Soc. Jap. 106 (1998) 951.
M. AGARWALA, D. KLOSTERMAN, N. OSBORNE and A. LIGHTMAN,inSolid Freeform Fabrication Symposium, Austin, TX, August, 1999.
H. V. ATKINSON and B. A. RICKINSON,inHot Isostatic Pressing, The Adam Hilger Series on NewManufacturing Processes and Materials, edited by John Wood (Nottingham University, 1991) Chap. 1, p. 1.
T. FUJIKAWA, Y. INOUE, K. HOMMA, T. TATSUNO, H. OKADA and N. KONDO, Kobelco Techn. Rev. 3 (1988) 1.
W. R. MORGAN and R. L. SANDS, Metall. Rev. 14 (1969) 85.
T. ISHII, in Proceedings of International Symposium on Ceramic Components for Engine, Japan, edited by Shiyeyuki Somiya, Eigo Kanai and Kenishiro Ando (KTK Scientific Publ., Tokyo, 1983) p. 425.
H. V. ATKINSON and B. A. RICKINSON,inHot Isostatic Pressing, The Adam Hilger Series on NewManufacturing Processes and Materials, edited by John Wood (Nottingham University, 1991) Chap. 3, p. 53.
H. D. B. RAES, Powder Met. 26 (1983) 193.
C. E. MUZZALL, Metall. Rev. 14 (1969) 85.
E. S. HODGE, C. B. BOYER and F. D. ORCUTT, Indust. Eng. Che. 54 (1962) 31.
R. L. SANDS, E. P. HERBERT and W. R. MORGAN, Powder Met. 8 (1965) 129.
E. S. HODGE, Metall. Rev. 14 (1969) 85.
S. KOFUNE, C. MANABE and T. FUJIKAWA,inProceedings of the 3rd International Conference on Hot Isostatic Pressing, London, UK, 10-12 Nov. 1986, edited by MPR Publishing Services Ltd. (1986) Vol. 1, p. 71.
S. H. LEE, J. Korean Ceram. Soc. 35 (1998) 659.
Z. HUANG, D. JIANG and S. TAN, J. Chin. Ceram. Soc. 25 (1997) 30.
K. WATARI, K. HIRAO, M. E. BRITO, M. TORIYAMA and S. KANZAKI, J. Mater. Res. 14 (1999) 1538.
J. HEINRICH and M. BOHMER, Sci. Ceram. 11 (1981) 439.
K. HOMA, H. OKADA, T. FUJIKAWAand T. TATSUNO, Yogyo Kyokai Shi 95 (1987) 91.
M. SHIMADA and H. ISHITOBI,in2nd International Conference on Hot Isostatic Pressing, Stratoford-upon-Avon, Sept. 21-23 (1982).
J. C. UY and E. R. HERMANN, 2nd International Conference on Hot Isostatic Pressing, Stratoford-upon-Avon, Sept. 21-23 (1982).
H. T. LARKER,in"Progress in Nitrogen Ceramics," edited by F. L. Riley (Martins Nijhoff Publishers, The Hague, 1983) p. 720.
L. HERMANSONN, T. HOLSTROM and H. T. LARKER, in ISO 3, Conference, London, Nov. 1986.
J. ADLERBORN, M. BURSTROM, L. HERMANSONN and H. T. LARKER, Mater. Design 8 (1987) 229.
D. S. PERERA, M. TOKITA and S. MORICCA, J. Eur. Ceram. Soc. 18 (1998) 401.
K. NIIHARA, T. SEKINO, E. YASUDA and T. SASA, Key Eng. Mater. 161–163 (1998) 221.
G. WOTTING and G. ZIEGLER,in"Ceramic Powders," edited by P. Vincenzini (Elsevier, Amsterdam, 1983) p. 951.
O. YEHESKEL, Y. GEFEN and M. TALIANKER, Mater. Sci. Engng. 78 (1986) 209.
C. GRESKOVICH, J. Amer. Ceram. Soc. 64 (1981) 725.
I. ITURRIZA, F. CASTRO and M. FUENTES, J. Mater. Sci. 24 (1989) 2047.
Y. KINEMUCHI, N. FUSAMUNE, A. TAKATA and K. ISHIZAKI, J. Ceram. Soc. Jap. 106 (1998) 435.
G. YA AKIMOV, V. G. VERESHCHAK, A. D. VASIL' EV, V. M. TIMCHENKO, E. V. CHAIKA and A. D. GRABCHUK, Refract. Ind. Ceram. 39 (1998) 324.
S. DONG, Z. CHEN, S. TAN, D. JIANG and J. GUO, J. Chin. Ceram. Soc. 26 (1998) 754.
S. M. BARINOV, V. F. PONOMAREV, V. YA SHEVCHENKO and D. SHAWRAN, J. Mater. Sci. Lett. 14 (1995) 871.
M. ROSSO, C. MUS and G. CHIARMETTA, Metal. Sci. Tech. 18 (2000) 16.
E. ROMANO, M. ROSSO and C. MUS, ibid. 19 (2001) 21.
Hitchiner Manufacturing Co., Inc., Ferrous Division/Gas Turbine Division, Technical Update 3D4, Scientific Literature, 2001.
S. GALLO, Metal. Sci. Tech. 19 (2001) 1.
S. GALLO, C. MUS and G. MORTARI, ibid. 19 (2001) 16.
H. V. ATKINSON and B. A. RICKINSON,in"Hot Isostatic Pressing, The Adam Hilger Series on NewManufacturing Processes and Materials," edited by John Wood (Nottingham University, 1991) Chap. 7, p. 107.
ISOTRON, HIP Bonded Products, Kobe Steel, Ltd., Catalogue, 1990.
Kinzoku Giken Co., Ltd., Technical Literature, 2002.
D. W. RICHERSON and D. W. FREITAG,inOpportunities for Advanced Ceramics to Meet the Needs of the Industries of the Future, DOE/ORO 2076, Prepared by U.S. Advanced Ceramics Association and Oak Ridge National Laboratory (1998) Chap. 2, p. 1.
M. K. FERBER and M. G. JENKINS, J. Amer. Ceram. Soc. 75 (1992) 2453.
S. HAMPSHIREand K. H. JACK,in"Special Ceramics 7," Proceedings of the British Ceramic Society, 1980, edited by D. Taylor and P. Popper (British Ceramic Society, Stoke on Trent, 1981) p. 37.
H. MANDAL, D. P. THOMPSON and K. H. JACK, Key Eng. Mater. 159-160 (1999) 1.
F. CASTRO and I. ITURRIZA, J. Mater. Sci. Lett. 9 (1990) 600.
H. T. LIN, P. F. BECHER, M. K. FERBER and V. PARTHASARATHY, Key Eng. Mater. 161-163 (1999) 671.
K. NEZUDA, Y. MIYAMOTO and M. KIZUMI,inProceedings of the International Conference on Hot Isostatic Pressing, Lulea Sweden, 15-17 June 1987 (Centek Publishers, Lulea, 1988) p. 359.
D. SORDELET, J. NEIL, M. MAHONEY and A. HECKER, The American Society of Mechanical Engineers, ASME, 91-GT-65, 1991.
H. KLEMM, M. HERRMANN and D. C. SCHUBERT, J. Engng. Gas Turb. Power 122 (2000) 13.
D. L. JIANG and Z. R. HUANG,in Novel Synthesis and Processing of Ceramics, Proc. Int. Symp. Kurume, 26-29 Oct. (1997) p. 379.
D. W. RICHERSON,in"Composites Engineering Handbook," edited by P. K. Mallick (Marcel Dekker, Inc., New York, 1997).
Y. MANABE, T. FUJIKAWA, M. UEDA and Y. INOUE, in Proceedings of the 1st European Ceramic Society Conference (EcersS'89), Maastricht, Netherland, edited by G. De With, R. A. Terpstra and R. Metselaar, June 18-23 (1989).
Y. NISHIKAWA, H. KUME, S. DÍAZ DE LA TORRE, S. INAMURA, H. MIYAMOTO, T. KATOand T. MAEDA,in Proceedings of 16th Inte. Japan-Korea Seminar on Ceramics, Nov. 30-Dec. 2, Okayama, Japan (1999).
N. CLAUSSEN, J. Amer. Ceram. Soc. 59 (1976) 49.
P. F. BECHER, ibid. 64 (1981) 37.
H. KUME, Y. NISHIKAWA, S. INAMURA, H. MIYAMOTO, K. YAMABE and T. MAEDA, Key Eng. Mater. 161-163 (1998).
S. POEHNITZSCH, G. GRATHWOHL, S. WEISS and R. OBERACKER, Ceram. Forum Int./Ver. DKG 76 (1999) 19.
T. MASAKI, N. NAKAJIMA and K. SHINDO, J. Mater. Sci. Lett. 5 (1986) 1115.
K. PANKAJ, MPR July/Aug. (1987) 506.
K. A. KHOR, Mater. Manuf. Processes. 12 (1997) 291.
Rights and permissions
About this article
Cite this article
Bocanegra-Bernal, M.H. Hot Isostatic Pressing (HIP) technology and its applications to metals and ceramics. Journal of Materials Science 39, 6399–6420 (2004). https://doi.org/10.1023/B:JMSC.0000044878.11441.90
Issue Date:
DOI: https://doi.org/10.1023/B:JMSC.0000044878.11441.90