Abstract
Introduction
Niobium is extremely important in SRF cavities because of its superconducting properties. However, there are some intrinsic limits of Nb cavities that cannot meet the requirements of future accelerators. It is therefore of utmost importance to look into materials offering SRF performances beyond niobium. Nb3Sn is the most promising material. In our work, the cathode target is cylindrical and rotatable, containing both Nb and Sn elements, which are simultaneously charged, aiming to explore the area ratios of the two elements required in the cathode target by simulation and experiments, respectively. This work will provide the basis for the subsequent Nb3Sn cathode target fabrication.
Simulations and experiments
In the simulation, we calculated stoichiometric ratio and sputtering yield to obtain the area ratios of Nb and Sn. In the experiment, we calculated the rotation rate of the target, deposition thickness of films on substrates and deposition rate to obtain the area ratio of Nb and Sn.
Conclusion
In conclusion, we compared the simulation and experimental results and found that they are in good agreement. The simulation and experimental results also showed that the area ratio of Nb to Sn in the target is close to 9:1. These results lay the foundation for the subsequent Nb3Sn cathode target fabrication and multilayer deposition of Nb3Sn thin films.
Similar content being viewed by others
References
A.A. Rossi, S.M. Deambrosis, S. Stark, et al. Nb3Sn films by multilayer sputtering, in Proceedings of SRF 2009, Berlin, TUOBAU06
L.I. Jinhai, A.A. Rossi, V. Palmieri, Magnetron sputtering and multilayer deposition of Nb3Sn superconducting thin film. Nuclear Phys. Rev. 32(Suppl Nov), 59–63 (2015)
M. Perpeet, M.A. Hein, G. Müller et al., High-quality Nb3Sn thin films on sapphire prepared by tin vapor diffusion. J. Appl. Phys. 82(10), 5021–5023 (1997)
S. Posen, D.L. Hall, Nb3Sn superconducting radiofrequency cavities: fabrication, results, properties, and prospects. Supercond. Sci. Technol. 30(3), 033004 (2017)
S. Franz, E. Barzi, D. Turrioni et al., Electrochemical synthesis of Nb3Sn coatings on Cu substrates. Mater. Lett. 161(1), 613–615 (2015)
E. Barzi, M. Bestetti, F. Reginato et al., Synthesis of superconducting Nb3Sn coatings on Nb substrates. Supercond. Sci. Technol. 29(1), 015009 (2016)
G. Carta, G. Rossetto, P. Zanella, et al. Attempts to deposit Nb3Sn by MO-CVD, in Proceeding of the International Workshop on Thin Films and New Ideas for Pushing the Limits of RF Superconductivity (Padua) (2006)
R. Hammond, B. Jacobson, T. Geballe et al., Studies of electron beam coevaporated Nb3Sn composites: critical current and microstructure. IEEE Trans. Magn. 15(1), 619–622 (1979)
B.E. Jacobson, R.H. Hammond, T.H. Geballet et al., Transmission electron microscopy studies of electron beam co-evaporated Nb3Sn–Cu superconducting composites. Thin Solid Films 54(2), 243–258 (1978)
L. Xiao, X. Lu, W. Tan, et al. The study of deposition method of Nb3Sn film on Cu substrate, in 18th international conference on RF superconductivity (SRF’17), Lanzhou, China, July 17–21, 2017. (JACOW, Geneva, 2018), pp. 131–133
J.F. Ziegler, M.D. Ziegler, J.P. Biersack, SRIM—The stopping and range of ions in matter. Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms. 268, 1818–1823 (2010)
Aeken K.V. Simtra. www.draft.ugent.be
NASCAM. http://www.unamur.be/sciences/physique/pmr/telechargement/logiciels/nascam
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, SK., Yang, YC. & Guo, DZ. Study on the area ratio of Nb–Sn target for the preparation of Nb3Sn films. Radiat Detect Technol Methods 3, 54 (2019). https://doi.org/10.1007/s41605-019-0134-y
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41605-019-0134-y