Correction to: Journal of Sustainable Metallurgy https://doi.org/10.1007/s40831-022-00639-0


Figure 9 in the article as originally published was mistakenly replaced with the graphic for Figure S1 in the Supplementary Material. The authors have also made a correction to the measurement instrument reported in the original figure caption (replacing NEO instrument with ProtIR). The correct figure and caption are presented below.

Fig. 9
figure 9

NOx concentrations measured with the ProtIR instrument vs the FGR rate. The dotted line is the calculated NOx concentration given a fixed mass flow from the furnace

The original article has been corrected.