Abstract
Purpose
In this paper, the development and testing of a laser sensor to detect initiation of sticking are discussed.
Method
The basic working principle of the device involves a laser source aimed at the punch tip, and a photosensor measuring the intensity of the reflected beam.
Results
The initial results show that the laser sensor can detect the accumulation of material on a flat punch tip and has the potential to be used as a real-time monitoring device during tablet manufacturing operations.
Conclusions
This work demonstrated that the laser sensor can characterize initiation of sticking with high sensitivity without the need to interrupt the compaction process as typically done with other sticking characterization techniques.
Similar content being viewed by others
References
Swaminathan S, Ramey B, Hilden J, Wassgren C. Characterizing the powder punch-face adhesive interaction during the unloading phase of powder compaction. Powder Technol. 2017;315:410–21.
Dubey A, Keyvan G, Hsia R, Saranteas K, Brone D, Misra T, et al. Analysis of pharmaceutical tablet coating uniformity by laser-induced breakdown spectroscopy (LIBS). J Pharm Innov. 2011;6:77–87.
Orun A, Smith G. Micro-structural analysis of tablet surface layers by intelligent laser speckle classification (ILSC) technique: an application in the study of both surface defects and subsurface granule structures. J Pharm Innov. 2017;12:296–308.
McDermott TS, Farrenkopf J, Hlinak A, Neilly JP, Sauer D. A material sparing method for quantitatively measuring tablet sticking. Powder Technol. 2011;212:240–52.
Roberts M, Ford JL, MacLeod GS, Fell JT, Smith GW, Rowe PH. Effects of surface roughness and chrome plating of punch tips on the sticking tendencies of model ibuprofen formulations. J Pharm Pharmacol. 2003;55:1223–8.
Roberts M, Ford JL, MacLeod GS, Fell JT, Smith GW, Rowe PH, et al. Effect of lubricant type and concentration on the punch tip adherence of model ibuprofen formulations. J Pharm Pharmacol. 2004;56:299–305.
Alsirawan MB, Mohammad MA, Alkasmi B, Alhareth K, El-Hammadi M. Development and validation of a simple HPLC method for the determination of ibuprofen sticking onto punch faces. Int J Pharm Pharm Sci. 2013;5:227–31.
Saniocki I, Sakmann A, Leopold CS. How suitable is the measurement of take-off forces for detection of sticking during direct compression of various ibuprofen tablet formulations? Pharm Dev Technol. 2013;18:257–65.
Wang Z, Shah UV, Olusanmi D, Narang AS, Hussain MA, Gamble JF, et al. Measuring the sticking of mefenamic acid powders on stainless steel surface. Int J Pharm. 2015;496:407–13.
Sendall FEJ, Staniforth JN. A study of powder adhesion to metal surfaces during compression of effervescent pharmaceutical tablets. J Pharm Pharmacol. 1986;38:489–93.
Mullarney MP, MacDonald BC, Hutchins A. Assessing tablet-sticking propensity by weighing accumulated powder on a removable punch tip. Pharm Technol. 2012;36:57–62.
Samiei L, Kelly K, Taylor L, Forbes B, Collins E, Rowland M. The influence of electrostatic properties on the punch sticking propensity of pharmaceutical blends. Powder Technol. 2017;305:509–17.
Paul S, Taylor LJ, Murphy B, Krzyzaniak J, Dawson N, Mullarney MP, et al. Mechanism and kinetics of punch sticking of pharmaceuticals. J Pharm Sci. 2017;106:151–8.
Paul S, Taylor LJ, Murphy B, Krzyzaniak JF, Dawson N, Mullarney MP, et al. Powder properties and compaction parameters that influence punch sticking propensity of pharmaceuticals. Int J Pharm. 2017;521:374–83.
Mollereau G, Mazel V, Busignies V, Tchoreloff P, Mouveaux F, Rivière P. Image analysis quantification of sticking and picking events of pharmaceutical powders compressed on a rotary tablet press simulator. Pharm Res. 2013;30:2303–14.
Tsosie H, Thomas J, Strong J, Zavaliangos A. Scanning electron microscope observations of powder sticking on punches during a limited number (N<5) of compactions of acetylsalicylic acid. Pharm Res. 2017;34:2012–24.
Waimer F, Krumme M, Danz P, Tenter U, Schmidt PC. A novel method for the detection of sticking of tablets. Pharm Dev Technol. 1999;4:359–67.
Tablet Breaking Force <1217>. U S Pharmacopea Natl Formul USP37–NF32. United States Pharmacopea Convention; 2015. p. 1146–8.
Fell JT, Newton JM. Determination of tablet strength by the diametral-compression test. J Pharm Sci. 1970;59:688–91.
Rasenack N, Müller BW. Properties of ibuprofen crystallized under various conditions: a comparative study. Drug Dev Ind Pharm. 2002;28:1077.
Rowe RC, Sheskey PJ, Quinn ME. Handbook of pharmaceutical excipients. 6th Revised edition. London: Pharmaceutical Press; 2009.
Aoki S, Danjo K. Effect of tableting conditions on the sticking of tablet using ibuprofen. Yakugaku Zasshi. 1998;118:511–8.
Danjo K, Kojima S, Chen CY, Sunada H, Otsuka A. Effect of water content on sticking during compression. Chem Pharm Bull. 1997;45:706–9.
Tousey MD. Sticking and picking: some causes and remedies. Tablets and Capsules. 2003. https://tabletscapsules.com/article/sticking-and-picking-some-causes-and-remedies/?ctracker=article.
Acknowledgements
The authors would like to thank GlaxoSmithKline for their financial support and access to instrumentation.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Thomas, J., Zavaliangos, A. An In-line, High Sensitivity, Non-contact Sensor for the Detection of Initiation of Sticking. J Pharm Innov 15, 66–72 (2020). https://doi.org/10.1007/s12247-018-9367-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12247-018-9367-4