Skip to main content
SpringerLink
Log in

Simultaneous shape and topology optimization of prestressed concrete beams

  • RESEARCH PAPER
  • Published:
Structural and Multidisciplinary Optimization Aims and scope Submit manuscript

Abstract

This paper presents a new optimization approach for the design of prestressed concrete beams. The prestressing tendon is modeled as a chain of linear segments that transfer point forces to the concrete domain according to the tendon’s angles. The concrete beam is modeled as a discretized continuum following density-based approaches to topology optimization. The shape of the tendon and the topology of the surrounding concrete are optimized simultaneously within a single problem formulation. A special filtering technique is developed in order to ensure that the tendon is covered by concrete, thus shape and topological variables are tightly coupled. Several test cases demonstrate the applicability of the proposed optimization procedure. The deformation of the optimized designs due to external loads is counteracted by the deformation due to prestressing, hence by tuning the force in the tendon the total deformation can approach zero. Consequently, the beams exhibit a compression-only response meaning that the common goal of prestressed concrete design is achieved.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

References

  • Amir O (2013) A topology optimization procedure for reinforced concrete structures. Comput Struct 114-115:46–58. https://doi.org/10.1016/j.compstruc.2012.10.011. http://www.sciencedirect.com/science/article/pii/S0045794912002337

    Article  Google Scholar 

  • Amir O, Sigmund O (2013) Reinforcement layout design for concrete structures based on continuum damage and truss topology optimization. Struct Multidiscip Optim 47(2):157–174. https://doi.org/10.1007/s00158-012-0817-1

    Article  MathSciNet  MATH  Google Scholar 

  • Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1(4):193–202

    Article  Google Scholar 

  • Bendsøe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71(2):197–224

    Article  MathSciNet  MATH  Google Scholar 

  • Bendsøe MP, Sigmund O (2003) Topology optimization - theory, methods and applications. Springer, Berlin

    MATH  Google Scholar 

  • Bogomolny M, Amir O (2012) Conceptual design of reinforced concrete structures using topology optimization with elastoplastic material modeling. Int J Numer Methods Eng 90(13):1578–1597. https://doi.org/10.1002/nme.4253

    Article  MATH  Google Scholar 

  • Bourdin B (2001) Filters in topology optimization. Int J Numer Methods Eng 50:2143–2158

    Article  MathSciNet  MATH  Google Scholar 

  • Bruggi M (2009) Generating strut-and-tie patterns for reinforced concrete structures using topology optimization. Comput Struct 87(23-24):1483–1495

    Article  Google Scholar 

  • Bruggi M (2016) A numerical method to generate optimal load paths in plain and reinforced concrete structures. Comput Struct 170:26–36

    Article  Google Scholar 

  • Bruns TE, Tortorelli DA (2001) Topology optimization of non-linear elastic structures and compliant mechanisms. Comput Methods Appl Mech Eng 190:3443–3459

    Article  MATH  Google Scholar 

  • Cohn M, Lounis Z (1993) Optimum limit design of continuous prestressed concrete beams. J Struct Eng 119(12):3551–3570

    Article  Google Scholar 

  • Deaton J, Grandhi R (2014) A survey of structural and multidisciplinary continuum topology optimization: post 2000. Struct Multidiscip Optim 49(1):1–38. https://doi.org/10.1007/s00158-013-0956-z

    Article  MathSciNet  Google Scholar 

  • Du J, Olhoff N (2004) Topological optimization of continuum structures with design-dependent surface loading–part i: new computational approach for 2d problems. Struct Multidiscip Optim 27(3):151–165

    Article  MathSciNet  MATH  Google Scholar 

  • Eurviriyanukul S, Askes H (2010) The equilibration of configurational forces in the tendon layout optimisation of pre-stressed concrete beams. Comput Struct 88(23):1412–1418

    Article  Google Scholar 

  • Eurviriyanukul S, Askes H (2011) Tendon layout optimisation through configurational forces equilibration in plane stress analysis of prestressed concrete structures. Comput Struct 89(17):1673–1680

    Article  Google Scholar 

  • Flower DJ, Sanjayan JG (2007) Green house gas emissions due to concrete manufacture. Int J Life Cycle Assess 12(5):282

    Article  Google Scholar 

  • Gaynor AT, Guest JK, Moen CD (2012) Reinforced concrete force visualization and design using bilinear truss-continuum topology optimization. J Struct Eng 139(4):607–618

    Article  Google Scholar 

  • Guest JK, Prėvost JH, Belytschko T (2004) Achieving minimum length scale in topology optimization using nodal design variables and projection functions. Int J Numer Methods Eng 61:238–254

    Article  MathSciNet  MATH  Google Scholar 

  • Kato J, Ramm E (2010) Optimization of fiber geometry for fiber reinforced composites considering damage. Finite Elem Anal Des 46(5):401–415

    Article  Google Scholar 

  • Kato J, Lipka A, Ramm E (2009) Multiphase material optimization for fiber reinforced composites with strain softening. Struct Multidiscip Optim 39(1):63–81

    Article  Google Scholar 

  • Kirsch U (1972) Optimum design of prestressed beams. Comput Struct 2(4):573–583

    Article  Google Scholar 

  • Kirsch U (1973) Optimized prestressing by linear programming. Int J Numer Methods Eng 7(2):125–136

    Article  Google Scholar 

  • Lazarov BS, Wang F, Sigmund O (2016) Length scale and manufacturability in density-based topology optimization. Arch Appl Mech 86(1-2):189–218

    Article  Google Scholar 

  • Lee E, Martins JR (2012) Structural topology optimization with design-dependent pressure loads. Comput Methods Appl Mech Eng 233:40–48

    Article  MathSciNet  MATH  Google Scholar 

  • Liang Q, Xie Y, Steven G (2000) Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure. ACI Struct J 97(2):322–330

    Google Scholar 

  • Liang QQ, Xie YM, Steven GP (2001) Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization. ACI Structural Journal 98(2):226–232

    Google Scholar 

  • Liu S, Qiao H (2011) Topology optimization of continuum structures with different tensile and compressive properties in bridge layout design. Struct Multidiscip Optim 43:369–380. https://doi.org/10.1007/s00158-010-0567-x

    Article  Google Scholar 

  • Luo Y, Kang Z (2012) Layout design of reinforced concrete structures using two-material topology optimization with druckerprager yield constraints, Structural and Multidisciplinary Optimization online. https://doi.org/10.1007/s00158-012-0809-1, published online

  • Luo Y, Wang MY, Zhou M, Deng Z (2015) Topology optimization of reinforced concrete structures considering, control of shrinkage and strength failure. Comput Struct 157:31–41

    Article  Google Scholar 

  • Mahasenan N, Smith S, Humphreys K (2003) The cement industry and global climate change: Current and potential future cement industry CO2 emissions. In: Gale J, Kaya Y (eds) Greenhouse Gas Control Technologies - 6th International Conference, Pergamon, Oxford, pp 995–1000. https://doi.org/10.1016/B978-008044276-1/50157-4

  • Moorman RB (1952) Equivalent load method for analyzing prestressed concrete structures. In: Journal Proceedings, vol 48, pp 405– 416

  • Sigmund O, Bendsøe MP (2004) Topology optimization: from airplanes to nano-optics. In: Stubkjær K, Kortenbach T (eds) Bridging from Technology to Society, Technical University of Denmark, Lyngby, Denmark

  • Sigmund O, Maute K (2013) Topology optimization approaches. Struct Multidiscip Optim 48(6):1031–1055

    Article  MathSciNet  Google Scholar 

  • Sigmund O, Torquato S (1997) Design of materials with extreme thermal expansion using a three-phase topology optimization method. J Mech Phys Solids 45(6):1037–1067

    Article  MathSciNet  Google Scholar 

  • Stocker TF, Qin D, Plattner GK, Tignor M, Allen SK, Boschung J, Nauels A, Xia Y, Bex B, Midgley B (2013) IPCC, 2013: climate change 2013: The physical science basis. Contribution of working group I to the fifth assessment report of the intergovernmental panel on climate change. Cambridge University Press, Cambridge

    Google Scholar 

  • Svanberg K (1987) The method of moving asymptotes - a new method for structural optimization. Int J Numer Methods Eng 24:359–373

    Article  MathSciNet  MATH  Google Scholar 

  • Victoria M, Querin OM, Marti̇ P (2011) Generation of strut-and-tie models by topology optimization using different material properties in tension and compression. Struct Multidiscip Optim 44:247–258

    Article  Google Scholar 

  • Wang F, Lazarov BS, Sigmund O (2011) On projection methods, convergence and robust formulations in topology optimization. Struct Multidiscip Optim 43:767–784

    Article  MATH  Google Scholar 

  • World Business Council for Sustainable Development (2012) The cement sustainability initiative: Executive brief. Tech. rep

  • Xu S, Cai Y, Cheng G (2010) Volume preserving nonlinear density filter based on heaviside functions. Struct Multidiscip Optim 41(4):495–505. https://doi.org/10.1007/s00158-009-0452-7

    Article  MathSciNet  MATH  Google Scholar 

  • Yang Y, Moen CD, Guest JK (2014) Three-dimensional force flow paths and reinforcement design in concrete via stress-dependent truss-continuum topology optimization. J Eng Mech 141(1):04014,106

    Article  Google Scholar 

  • Zhu J, Zhang W, Beckers P, Chen Y, Guo Z (2008) Simultaneous design of components layout and supporting structures using coupled shape and topology optimization technique. Struct Multidiscip Optim 36 (1):29–41

    Article  MathSciNet  MATH  Google Scholar 

  • Zhu JH, Zhang WH, Xia L (2015) Topology optimization in aircraft and aerospace structures design. Arch Comput Meth Eng 23(4):595–622

    Article  MathSciNet  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Faculty of Civil and Environmental Engineering, Technion – Israel Institute of Technology, Haifa, Israel

    Oded Amir & Emad Shakour

Authors
  1. Oded Amir
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Emad Shakour
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Oded Amir.

Additional information

The authors gratefully acknowledge funding received from the European Commission Research Executive Agency, grant agreement PCIG12-GA-2012-333647

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Amir, O., Shakour, E. Simultaneous shape and topology optimization of prestressed concrete beams. Struct Multidisc Optim 57, 1831–1843 (2018). https://doi.org/10.1007/s00158-017-1855-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00158-017-1855-5

Keywords

Search

Navigation