Abstract
Rheology is part of continuum mechanics. Thus, the basic principles of continuity, homogeneity and isotropy are incorporated into the basic rheological relations. The continuity principle requires that there is no discontinuity of material properties from one mathematical point to another; homogeneity demands that there is no concentration gradient, and isotropy implies that the flow does not impose orientation on the flow elements.
References
Abbott, J. R., Tetlow, N., Graham, A. L., Altobelli, S. A., Fukushima, E., Mondy, L. A., and Stephens, T. S., J. Rheol., 35, 773 (1991).
Ablazova, T. I., Tsebrenko, M. B., Yudin, A. V., Vinogradov, G. V. and Yarlykov, B. V., J. Appl. Polym. Sci., 19, 1781 (1975).
Acierno, D. D., Curto, D., La Mantia, F. P., and Valenza, A., NRCC/IMRI symposium “Polyblends-’85”, Boucherville, Quebec, Canada, April 16-17, 1985; Polym. Eng. Sci., 26, 28 (1986).
Ahn, T. O., Kim, J. H., Jeong, H. M., Lee, S. W. and Park, L. S., J. Polym. Sci.; Part B: Polymer Physics, 32, 21 (1994).
Aït-Kadi, A., Ajji, A., and Brahimi, B., in Theoretical and Applied Rheology, Moldenaers, P., and Keunings, R.,Eds., 11 Intl. Cong. Rheology, Brussels, Elsevier Sci.Pub., (1992).
Ajji, A. and Gignac, P.A., Polym. Eng. Sci., 32, 903 (1992).
Ajji, A., and Choplin, L., Macromolecules, 24, 5221 (1991).
Ajji, A., and Utracki, L. A., Polym. Eng. Sci., 36, 1574 (1996);Prog. Rubber & Plastics Technol., 13, 153 (1997).
Ajji, A., Choplin, L., and Prud’homme, R. E., J. Polym. Sci.,Part B, Polym. Phys., 26, 2279 (1988); ibid., 29, 1573(1994).
Akovali, G., J. Polym. Sci., A-2, 5, 875 (1967)
Allan, P. S., and Bevis, M. J., Plast. Rubber Proc. Appl., 3,85, 331 (1983); ibid., 5, 71 (1985); ibid., 7, 3 (1987);Proceed. 5-th Annual PPS Meeting, Kyoto, 11-14.04(1989).
Alle, N. and Lyngaae-Jørgensen, J., Rheol. Acta, 19, 94 (1980 a);ibid., 19, 104 (1980 b).
Alle, N., Andersen, F. E., and Lyngaae-Jørgensen, J., Rheol.Acta, 20, 222 (1981).
Anastasiadis, S. H., Gancarz, I., and Koberstein, J. T., Macromolecules,21, 2980 (1988); ibid., 22, 1449 (1989).
Angell, C. A., Polymer, 38, 6261 (1997).
Anklam, M. R., Warr, G. G., and Prud’homme, R. K., J. Rheol.,38, 797 (1994).
Aoki, Y. and Watanabe, M., Polym. Eng. Sci., 32, 878 (1992).
Araujo, M. A., and Stadler, R., Makromol. Chem., 189, 2169([1988).
Arnold, K. R., and Meier, D. J., J. Appl. Polym. Sci., 14,427 (1970).
Arrhenius, S., Z. physik. Chem. (Leipzig), 1, 285 (1887).
Ausin, A., Eguiazabal, I., Munoz, M. E., Pena, J. J., and Santamaria, A., Polym. Eng. Sci., 27, 529 (1987).
Avgeropoulos, G. N., Weissert, F. C., Biddison, P. N., and Böhm, G. G. A., Rubber Chem. Technol., 49, 93 (1976).
Bains, M., Balke, S. T., Reck, D. and Horn, J., Polym. Eng. Sci., 34, 1260 (1994).
Baranov, A. O., Nizhegorodov, V. V., Perepechko, I. I., Knunyants, M. I., and Pruts, E., Vysokomol. Soedin., A 34, 66 (1992).
Barentsen, W.M., Heikens, D. and Piet, P. Polymer, 15, 119 (1974).
Barrar, I., Mathur, G. N., Polymer, 35, 2631 (1994).
Barry, B. W., Adv. Colloid Interface Sci., 5, 37 (1977).
Barthès-Biesel, D., and Acrivos, A. A., J. Fluid Mech., 61, 1 (1973).
Barthès-Biesel, D., in Rheological Measurements, A. A. Collyer and D. W. Clegg, Eds., Elsevier Appl. Sci., London (1988).
Barthès-Biesel, D., and Chhim, V., Int. J. Multiphase Flow, 7, 493 (1981).
Bartlett, D. W., Barlow, J. W., and Paul, D. R., J. Appl. Polym. Sci., 27, 2351 (1982).
Batchelor, G. K., J. Fluid Mech., 44, 419 (1970); ibid., 46, 813 (1971); Ann. Rev. Fluid Mech., 6, 227 (1974); J. Fluid Mech., 83, 97 (1977).
Bazuin, C. G., and Eisenberg, A., J. Polym. Sci., Part B: Polym. Phys., 24, 1021, 1121, 1137, 1155 (1986).
Becraft, M. L., and Metzner, A. B., J. Rheol., 36, 143 (1992).
Beery, D., Kenig, S. and Siegmann, A., Polym. Eng. Sci. 31, 451 (1991).
Beery, D., Kenig, S., Siegmann, A. and Narkis, M., Polym. Eng. Sci., 32, 6 (1992).
Bibbo, M. A., Dinh, S. M., and Armstrong, R. C., J. Rheol., 29, 905 (1985).
Bigg, D. I., and Middleman, S., Ind. Eng. Chem., Fundamentals, 13, 113 (1974).
Bigio, D. I., and Conner, J. H., Polym. Eng. Sci., 35, 1527 (1995).
Binding, D. M., J. Non-Newtonian Fluid Mech., 27, 173 (1988).
Bingham, E. C., Fluidity and Plasticity, page 86, McGraw- Hill, New York (1922).
Blizard, K. G. and Haghighat, R. R., Polym. Eng. Sci., 33, 799 (1993).
Bolotnikova, L. S., Evseer, A. K., Panov, Yu. N., and Frenkel, S. Ya., Vysokomol. Soed., B24, 154 (1982).
Booij, H. C., and Palmen, J. H. M., 11 Congress Rheology,Brussels 17-21 Aug 1992, Elsevier Sci. Pub., (1992).
Bousfield, D. W., Keunings, R., Marucci, G., and Denn, M. M., J. Non-Newt. Fluid Mech., 21, 79 (1986).
Bousmina, M., and Muller, R., 11 Cong. Rheology, Brussels 17-21 Aug 1992, Elsevier Sci. Pub., (1992); Rheol. Acta, 35, 369 (1996).
Bousmina, M., Palierne, J. F., and Utracki, L. A., Polym. Eng. Sci., 39, 1049 (1999).
Brady, J. F., and Bossis, G., J. Fluid Mech., 155, 105 (1985).
Brady, J. F., J. Chem. Phys., 99, 567 (1993).
Brahimi, B., Aït-Kadi, A., Ajji, A., and Fayt, R., J. Rheol., 35, 1069 (1991).
Brekner, M. J., Cantow, H. J., and Schneider, H. A., Polym. Bull., 14, 17 (1985).
Brenner, H., J. Fluid Mech., 4, 641 (1970).
Bretas, R. E. S. and Granado, C., Europ. Polym., 290, 769 (1994).
Bretas, R. E. S., Collias, D. and Baird, D. G., Polym. Eng.Sci., 34, 1492 (1994).
Bye, D. J., and Miles, I. S., Europ. Polym. J., 22, 185 (1986).
Cameron, N. R., and Sherrington, D. C., Adv. Polym. Sci., 126, 163 (1996).
Carreau, P. J., Trans. Soc. Rheol., 16, 99 (1972).
Cassagnau, P., Bert, M., Verney, V. and Michel, Polym. Eng. Sci., 32, 998 (1992).
Cavaille, J. Y., Perez, J., Jourdan, C., and Johari, G. P., J. Polym. Sci. B: Polym. Phys., 25, 1847 (1987).
Chaffey, C. E., Ann. Rev. Mater. Sci., 13, 43 (1983).
Champagne, M. F., Dumoulin, M. M., Utracki, L. A., and Szabo, J. P., Polym. Eng. Sci., 36, 1636 (1996).
Chan, C.-M., Nixon, A., and Venkatraman, S., J. Rheol., 36, 807 (1992). 1992
Chang, C., and Powell, R. L., J. Rheol., 38, 85 (1994).
Chapleau, N., Carreau, P. J., Peleteiro, C., Lavoic, P.-A. and Malik, T. M., Polym. Eng. Sci., 32, 1876 (1992).
Chella, R., and Ottino, J. M., Ind. Eng. Chem., Fundamentals, 24, 170 (1985).
Chella, R. in “Mixing and Compounding of Polymers”, Manas-Zloczower, I. and Tadmor, Z., Eds., Hanser Publishers,Munich Vienna New York (1994).
Chen, C. and Lai, F. S., Polym. Eng. Sci., 34, 472 (1994).
Chesters, A. K., Trans. Ind. Chem. Eng., A69, 259 (1991).
Chin, H. B., and Han, C. D., J. Rheol., 23, 557 (1979); 24, 1 (1980).
Choi, S. J., and Schowalter, W. R., Phys. Fluids, 18, 420 (1975).
Chuang, H.-K. and Han C. D., in: C. D. Han, Ed., “Polymer Blends and Composites in Multiphase Systems”, Adv. Chem. Ser. 206, Am. Chem. Soc. (1984).
Chuang, H.-K. and Han, C. D., J. Appl. Polym. Sci., 29, 2205 (1984); ibid., 30, 165 (1985); ibid., 30, 2457 (1985); Adv. Chem. Ser., 204, 171, (1984 ); J. Polym. Sci., 29, 2205 (1984 ).
Clarke, N., McLeish, T. C. B., Pavawongsak, S., and Higgins,J. S., Macromolecules, 30, 4459 (1997).
Cogswell, F. N. Polym. Eng. Sci., 12, 69 (1972); Trans. Soc. Rheol., 16, 383 (1972).
Cogswell, F. N., Griffin, B. P., and Rose, J. B., Europ. Pat. Appl, 030,417, 17 June 1981, Appl. 07 Nov 1980; U.S. Pat., 4,386,174, 1983; U.S. Pat., 4,433,083, 1984; U.S. Pat., 4,438,236, 1984, U. K. Appl. 1979, to Imperial Chemical Industries, PLC.
Colby, R. H., Polymer, 30, 1275 (1989).
Collyer, A. A., and Clegg, D. W., Eds., “Rheological Measurements,”Elsevier Appl. Sci., London (1988).
Collyer, A. A., and Utracki, L. A., Eds., “Polymer Rheology and Processing,” Elsevier Applied Science, London (1990).
Couchman, P. R., J. Appl. Polym. Sci., 60, 1057 (1996).
Cox, R. G., and Mason, S. G., Ann. Rev. Fluid Mech., 3, 291 (1971).
Cox, R. G., J. Fluid Mech., 37, 601 (1969).
Cross, M. M., J. Colloid Sci., 20, 417 (1965); 33, 30 (1970); 44, 175 (1973).
Crowson, R. J., and Folkes, M. J., Polym. Eng. Sci., 20, 934 (1980).
Crowson, R. J., Folkes, M. J., and Bright, P. F., Polym. Eng. Sci., 20, 925 (1980).
Crowson, R. J., Scott, A. J., and Saunders, D. W., Polym. Eng. Sci., 21, 1014 (1981).
Curto, D., La Mantia, F. P., and Acierno, D., Rheol. Acta, 22, 197 (1983).
D’Orazio, L., Mancarella, C., Martuscelli, E., Casale, A., Filippe, A. and Speroni, F., J. Mater. Sci., 21, 989 (1986); ibid., 22, 429 (1987)
Danesi, S. and Porter, R. S., Polymer, 19, 448 (1978).
David, C., Getlichermann, M., Trojan, M. and Jacobs, R., Polym. Eng. Sci., 32, 6 (1992).
De Bruijn, R. A., Ph.D. Thesis, Eindhoven University of Technology (1989).
Deanin, R. D., and d’Isidoro, G. E., A. C. S., Div. Org. Coat. Plast. Prepr., 43, 19 (1980).
Delaby, I., Ernst, B., and Muller, R., Rheol. Acta, 34, 525 (1995).
Delaby, I., Ernst, B., Germain, Y., and Muller, R., J. Rheol., 38, 1705 (1994).
Denisov, I. E., Krasheninnikov, A. I., and Chervin, V. G., Kolloid. Zhurn., 47, 790 (1985).
Deopura, B. L., and Kadam, S., J. Appl. Polym. Sci., 31, 2145 (1986).
Deri, F., and Behar, O., Polym. Intl., 28, 63 (1992).
Dimov, K., and Savov, M., Vysokomol. Soed., A22, 65 (1980).
Dinh, S. M., and Armstrong, R. C., J. Rheol., 28, 207 (1984).
Dobrescu, V., and Cobzaru, V., J. Polym. Sci., Polym. Symp., 64, 27 (1978).
Dobrescu, V., in Rheology, G. Astarita, G. Marrucci, and L. Nicolais, Eds., Plenum Press, New York, Vol. 2, 555 (1980).
Doi, M., and Edwards, S. F., J. Chem. Soc., Faraday Trans., 11, 74, 560, 918 (1978).
Doi, M., and Ohta, T., J. Chem. Phys., 95, 1242 (1991).
Doi, M., and Onuki, A., J. Phys. (Paris), 2, 1631 (1992).
Doraiswamy, M., and Metzner, A. B., Rheol. Acta, 25, 580 (1986).
Dreval, V. Ye., Vinogradov, G. V., Zabugina, M. P., Krasnikova, N. P., Kotova, E. V., and Pelzbauer, Z., Rheol. Acta, 22, 102 (1983)
Dreval, V. Ye., Kassa, A., Borisenkova, Ye. K., Kerber, M. L., Vinogradov, G. V., and Akutin, M. S., Vysokomol. Soed., A25, 156 (1983).
Dumoulin, M. M., Farha, C., and Utracki, L. A., Polym. Eng. Sci., 24, 1319 (1984 ).
Dumoulin, M. M., PhD thesis, Ecole Polytechnique, Montreal (1988).
Dumoulin, M. M., Toma, P., Utracki, L. A., Jinnah, I., and Kamal, M. R., SPE Techn. Papers, 31, 534 (1985).
Dumoulin, M. M., Utracki, L. A., and Carreau, P. J., 36th Conference of the Canad. Soc. Chem. Eng., Sarnia, Ont., Canada, Oct. 5-8 (1986).
Dumoulin, M. M., Utracki, L. A., and Farha, C., S. P. E. Techn. Pap., 30, 443 (1984 ).
Dumoulin, M. M., Utracki, L. A., and Lara, J., Polym. Eng. Sci., 24, 117 (1984 a).
Dzuy, N. Q., and Boger, D. V., J. Rheol., 27, 321 (1983); 29, 335 (1985).
Edel, P., PhD thesis (3e cycle), Univ. Pau (1984).
Einstein, A., Ann. Phys., 19, 289 (1906); ibid., 34, 591 (1911).
El Khadi, H., Denault, J. Tapin, D., Champagne, M. F., Utracki L. A., and Dumoulin, M. M., SPE Techn. Pap., 41, 3143 (1995).
Elemans, P. H. M., “Modeling of the Processing of Incompatible Polymer Blends,” PhD Thesis, Eindhoven University of Technology (1989).
Elmendorp, J. J., PhD Thesis, Delft University of Technology, The Netherlands (1986); Polym. Eng. Sci., 26, 418 (1986).
Elster, C., Honerkamp, J., and Weese, J., Rheol. Acta, 30, 161 (1993).
Erwin, L., Polym. Eng. Sci., 18, 1044 (1978).
Eshuis, A., and Mellema, J., Colloid Polym. Sci., 262, 159 (1984).
Favis, B. D. and Chalifoux, J. P., Polymer, 29, 1761 (1988).
Fayt, R. and Teyssie, Ph., Polym. Eng. Sci., 29, 538 (1989).
Fayt, R., Jerome, R. and Teyssie, Ph., J. Polym. Sci., Makromol. Chem., 187, 837 (1986); J. Polym. Sci., Polym. Lett. Ed., 19, 79 (1981); ibid., 24, 25 (1986); J. Polym. Sci., Polym. Phys. Ed., 19, 1269 (1981); ibid., 20, 2209 (1982).
Fernandez, M. L., Higgins, J. S., and Richardson, S. M., Trans IChemE, 71A, 239 (1993).
Fernandez, M. L., Higgins, J. S., Horst, R. and Wolf, B. A.,Polymer, 36, 149 (1995).
Ferry, J. D., VIscoelastic Properties of Polymers, Third edition, John Wiley & Sons, Inc., New York (1980).
Fesko, D. G., and Tschoegl, N. W., J. Polym. Sci., C35, 51 (1971).
Flumerfelt, R. W., Ind. Eng. Chem. Fundam., 11, 312 (1972).
Folkes, M. J., Ed., “Processing, Structure and Properties of Block Copolymers,” Elsevier Applied Science, London (1985).
Folkes, M. J., “Short Fiber Reinforced Thermoplastics,” Wiley, New York (1982).
Fortelny, I., Kamenicka, D., and Kovar, J., Angew. Makrom. Chemie, 164, 125 (1988).
Fortelny, I., Michalkova, D., Koplikova, J., Navratilova, E., and Kovar, J., Angew. Makromol. Chemie, 179, 185 (1990).
Frank, A., and Meissner, J., Rheol. Acta, 23, 117 (1984).
Frederix, H. R., Fayt, R., and Gilliquet, A., “Comportement Industriel des Alliages Polymeriques — Analyse et Perspectives Nouvelles”, internal report No. PL 15 CRIF, Bruxelles, Belgium, July (1981).
Friedman, E. M., and Porter, R. S., Trans. Soc. Rheol., 19, 493 (1975).
Friedrich, Chr., Gleinser, W., Korat, E., Maier, D., and Weese, J., J. Rheol., 39, 1411 (1995).
Gadala-Maria, F. A., PhD Thesis, Stanford University (1979).
Ganani, E., and Powell, R. L., J. Comp. Mater., 19, 194 (1985).
Garmabi, H., and Kamal, M. R., SPE Techn. Pap., 41, 3182 (1995).
Gauthier, F., Goldsmith, H. L., and Mason, S. G., Rheol. Acta, 10, 344 (1971).
Gell, C. B., Krishnamoorti, R., Kim, E., Graessley, W. W., and Fetters, L. J., Rheol. Acta, 36, 217 (1997).
Gerasimchuk, A. A., Romankevich, O. V., and Aizenshtein, E. M., Khim. Volok., 2, 21 (1986).
Germain, Y., Ernst, B., Genelot, O., and Dhamani, L., J. Rheol., 38, 681 (1994).
Ghiam, F. and White, J. L., Polym. Eng. Sci., 31, 76 (1991)
Ghijsels, A., Ente, J. J. S. M., and Raadsen, J., in “Integration of Fundamental Polymer Science and Technology-2,” P. J. Lemstra and L. A. Kleintjens, Eds., Elsevier Appl. Sci. Amsterdam (1988).
Giesekus, H., private communication (1981).
Gladwell, N., Rahalkar, R. R., and Richmond, P., Rheol. Acta,25, 55 (1986).
Glasstone, S., Laidler, K. L., and Eyring, H., Theory of Rate Processes, McGraw-Hill, New York (1941).
Gleisner, W., Braun, H., Friedrich, Ch., and Cantow, H. J., Polymer, 35, 128 (1994b).
Gleisner, W., Maier, D., Schneider, M., Weese, J., Friedrich, Ch., and Honerkamp, J., J. Appl. Polym. Sci., 53, 39 (1994a).
Gleissle, W., in “Rheology,” Astarita, G., Marruci, G., and Nicolais, L., Eds., Vol. 2, 457, Plenum Press, New York (1980).
Goddard, J. D., and Miller, C., J Fluid Mech., 28, 657 (1967).
Goettler L. A. and Shen, K. S., Rubber Chem. Technol., 56, 619 (1983).
Goettler, L. A., Polym. Compos., 5, 60 (1984).
Goldman, A. Ya., Murzakhanov, G. Kh., and Soshina, O. A., Mekh. Polim., 4, 614 (1977).
Goldsmith, H. L., and Mason, S. G., in Rheology, Eirich, F. R., Ed., Vol. 4, Academic Press, New York (1967).
Golovoy, A., Kozlowski, M. and Narkis, M., Polym. Eng. Sci., 32, 854 (1992).
Gonzalez-Nunez, R., Favis, B. D. and Carreau, P. J., Polym. Eng. Sci., 33, 851 (1993).
Gopalakrishnan, R., Shultz, M. and Gohil, R. M., J. Appl. Polym. Sci., 56, 1749 (1995).
Goto, H. and Kuno, H., J. Rheol., 26, 387 (1982); ibid., 28, 197 (1984).
Goto, S., Nagazono, H., and Kato, H., Rheol. Acta, 25, 119, 246 (1986).
Grace, H. P., Chem. Eng. Commun., 14, 225 (1982).
Graebling, D., and Muller, R., Colloids Surf., 55, 89 (1991).
Graebling, D., Benkira, A., Gallot, Y. and Muller, R., European Polymer, 30, 301 (1994).
Graebling, D., Muller, R., and Palierne, J. F., Macromolecules, 26, 320 (1993).
Graham, A. L., Altobelli, S. A., Fukushima, E., Mondy, L. A., and Stephens, T. S., J. Rheol., 35, 191 (1991).
Gramespacher, H., and Meissner, J., J. Rheol., 39, 151 (1995).
Grizzuti, N., and Bifulco, O., Rheol. Acta, 36, 406 (1997).
Grmela, M., Ait-Kadi, A., and Utracki, L. A., J. Non-Newtonian Fluid Mech., 77, 253 (1998).
Grmela, M., and Ait-Kadi, A., J. Non-Newtonian Fluid Mech., 55, 191 (1994); ibid., (1998).
Grmela, M., Bousmina, M., and Palierne, J.-F., Rheol. Acta, 40, 560 (2001).
Groves, D. J., McLeish, T. C. B., Chohan, R. K., and Coates, P. D., Rheol. Acta, 35, 481 (1996).
Guenther, G. K., and Baird, D. G., J. Rheol., 40, 1 (1996).
Gupta, A. K., and Srinivasan, K. R., J. Appl. Polym. Sci., 47, 167 (1993).
Gupta, A. K., Ratnam, B. K., Srinivasan, K. R., J. Appl. Polym. Sci., 46, 281 (1992).
Han, C. D., and Chuang, H.-K., J. Appl. Polym. Sci., 30, 2431 (1985).
Han, C. D., and Funatsu, K., J. Rheol., 22, 113 (1978).
Han, C. D., and Kim, J. K., Polymer, 34, 2533 (1993).
Han, C. D., and Yang, H.-H., J. Appl. Polym. Sci., 33, 1199, 1221 (1987).
Han, C. D., and Yu T. C., J. Appl. Polym. Sci., 15, 1163 (1971); Polym. Eng. Sci., 12, 81 (1972); J. Appl. Polym. Sci., 15, 1163 (1981).
Han, C. D., Kim, Y. W., and Chen, S. J., J. Appl. Polym. Sci., 19, 2831 (1975).
Han, C. D., Multiphase Flow in Polymer Processing, Academic Press, New York (1981).
Hashimoto, T., Fujimura, M., and Kawai, H., Macromolecules, 13, 1237 (1980b).
Hashimoto, T., Nagatoshi, K., Todo A., and Kawai, H., Macromolecules, 13, 1237 (1980a).
Hashimoto, T., Shibayama, M., and Kawai, H., Macromolecules, 13, 1237 (1980c).
Hashimoto, T., Takebe, T., and Fujioka, K., in Dynamics and Patterns in Complex Fluids, Onuki, A., and Kawasaki, K., Eds., Springer, New York (1990).
Hashin, Z., Appl. Mech. Rev., 17, 1 (1964).
Hayashida, K., and Yoshida, T., Bull. Faculty Textile Sci., Kyoto U., 9, 65 (1979).
Heikens, D. and Barentsen, Polymer, 18, 69 (1977).
Heitmiller, R. F., Naar, R. Z., and Zabusky, H. H., J. Appl. Polym. Sci., 8, 873 (1964).
Helfand, E., and Fredrickson, G. H., Phys. Rev. Letters, 62, 2468 (1989).
Helfand, E., and Sapse, A. M., J. Chem. Phys., 62, 1327 (1975).
Helfand, E., and Tagami, Y., J. Polym. Sci., Polym. Letters, 9, 741 (1971); J. Chem. Phys., 56, 3593 (1972).
Helfand, E., and Wasserman, Z. R., Macromolecules, 9, 879 (1976); ibid., 11, 960 (1978); ibid., 13, 994 (1980).
Henderson, C. P., and Williams, M. C., J. Polym. Sci., Polym. Lett. Ed., 17, 257 (1979).
Hinch, E. J., and Acrivos, A. A., J. Fluid Mech., 98, 305 (1980).
Hinch, E. J., and Leal, L. G., J. Fluid Mech., 52, 683 (1972).
Hindawi, I. A., Higgins, J. S., and Weiss, R. A., Polymer, 33, 2522 (1992).
Hinrichsen, G., and Green, W., Kunststoffe, 71, 99 (1981).
Ho, W-J. and Salovey, R., Polym. Eng. Sci., 21, 839 (1981).
Hoffman, R. L., Trans. Soc. Rheol., 16, 155 (1972); J. Colloid Interface Sci., 46, 491 (1974).
Honerkamp, J., and Weese, J., Continuum Mech. Thermod., 2, 17 (1990); Rheol. Acta, 32, 57, 65 (1993).
Hong, S. M. and Kim, B. C., Polym. Eng. Sci., 34, 1605 (1994).
Hong, S. M., Kim, B. C., Hwang, S. S. and Kim, K. U., Polym. Eng. Sci., 33, 630 (1993).
Horst, R., and Wolf, B. A., Macromolecules, 24, 2236 (1991); ibid., 25, 5291 (1992).
Huang, J.-C., Shen, H.-F., and Chu, Y.-T., Adv. Polym. Technol., 13, 49 (1994).
Huneault, M. A., Champagne, M. F., Luciani, A., Hetu, J.-F., and Utracki, L. A., “Generation of Polymer Blends’ Morphology,” Polymer Processing Society, Stuttgart, Germany, 1995.09. 26-28. (1995b).
Huneault, M. A., Shi, Z. H., and Utracki, L. A., Polym. Eng. Sci., 35, 115 (1995a).
Ibar, J. P., Polym.-Plast. Technol. Eng., 17, 11 (1981); U.S.A. Pat, 4,469,649, September 04, 1984, priority March 14, 1979; Plast. News, Oct. 18, 1993.
Ide, F., and Hasegawa, A., J. Appl. Polym. Sci., 18, 963 (1974).
Ikkala, O. T., and Reima, I. T., Polym. Eng. Sci., 34, 395 (1994).
Inoue, T., private communication (1993).
Inoue, T., Soen, T., Hashimoto, T., and Kawai, H. J., Polym. Sci., Part A-2, 7, 1283 (1969).
Jang, S. E., and Kim, B. S., Polym. Eng. Sci., 34, 847 (1994).
Jezequel, P. H., Flaud, P., and Quemada, D., Chem. Eng. Commun., 32, 85 (1985).
Jin, H.-F., and Tao, J., Plastics, Rubber and Composites Processing and Applications, 16, 45 (1991).
Kalyon, D. M., Lawal, A., Yazici, R., Yaras, P., and Railkar, S., Polym. Eng. Sci., 36, 00 (1998).
Kalyon, D. M., Yaras, P., Aral, B., and Yilmazer, U., J. Rheol., 37, 35 (1993).
Kamal, M. R., Garmabi, H., Hozhabr, S. and Arghyris, L., Polym. Eng. Sci., 35, 41 (1995).
Kamal, M. R., Jinnah, I. A., and Utracki, L. A., Polym. Eng. Sci., 24, 1337 (1984 b).
Kamal, M. R., Mutel, A. T., and Utracki, L. A., Polym Compos., 5, 289 (1984).
Kammer, H. W., and Socher, M., Acta Polym., 33, 658 (1982).
Kammer, H. W., Kressler, J., and Kummerloewe, R., Adv. Polym. Sci., 106, 31 (1993).
Kannan, R. M., and Kornfield, J., J. Rheol., 38, 1127 (1994).
Kanu, R. C., and Shaw, M. T., Polym. Eng. Sci., 22, 507 (1982).
Karger-Kocsis, J., Ed., “Polypropylene: Structure, Blends and Composites,” Elsevier Appl. Sci., Barking, UK, (1994).
Karger-Kocsis, J., Polym. Eng. Sci., 27, 241 (1987).
Karis, T. E., Prieve D. C., and Rosen, S. L., J. Rheol., 28, 381 (1984).
Karnis, A., Goldsmith, H. L., and Mason, S. G., J. Colloid Interface Sci., 22, 531 (1966).
Kasajima, M., Ito, K., Suganuma, A., and Kunti, D., Kobun. Robunshu, 38, 239, 245 (1981).
Kato, K., Polymer, 9, 225 (1968).
Katsaros, J. D., Malone, M. F., and Winter, H. H., Polym. Bull., 16, 83 (1986); Polym. Eng. Sci., 29, 1434 (1989).
Khayat, R. E., Luciani, A., and Utracki, L. A., Boundary Elements, 8, 515 (1996).
Kim, B. K., Han, C. D., and Lee, Y. J., Polym. J., 24, 205 (1992).
Kim, B. K., in 37th Symposium on Macromolecules, Soc. Polym. Sci. Japan (SPSJ), Fukuoka, Japan, Oct., (1989).
Kim, S., Hobbie, E. K., Yu, J.-W., and Han, C. C., Macromolecules, 30, 8245 (1997).
Kitade, S., Ichikawa, A., Imura, N., Takahashi, Y., and Noda, I., J. Rheol., 41, 1039 (1997).
Kitano, T., and Kataoka, T., Rheol. Acta, 20, 390 (1981).
Kitano, T., Kataoka, T., and Nagatsuka, Y., Rheol. Acta, 23, 20 (1984).
Klempner, D., and Frisch, K. C., Eds., Polymer Alloys III, Plenum Press, New York (1983).
Klempner, D., Sperling, L. H., and Utracki, L. A., Eds., Interpenetrating Polymer Networks, Adv. Chem. Ser., 239, Amer. Chem. Soc., Washington, DC (1994).
Kohli, A., Chung, N. and Weiss, R. A., Polym. Eng. Sci., 29, 573 (1989).
Krasnikova, N. P., Kotova, E. V., Plotnikova, E. P., Zabugina, M. P., Vinogradov, G. V., Dreval V. E., and Pelzbauer, Z., Kompoz. Polim. Mater., 21, 37 (1984).
Krasnikova, N. P., Kotova, E. V., Vinogradov, G. V., and Pelzbauer, Z., J. Appl. Polym. Sci., 22, 2081 (1978).
Krause, S., Macromolecules, 13, 1602 (1980).
Kressler, J., Higashida, N., Inoue, T., Heckmann, W., and Seitz, F., Macromolecules, 26, 2090 (1993).
Krieger, I. M., and Choi, G. N., Proc. IX Int. Cong. Rheol., Mexico, 1984; Advances in Rheology, B. Mena, A. Garcia-Rejon and C. Rangel-Nafaile, Eds., Univ. Nat. Autonom. Mexico (1984).
Krieger, I. M., and Dougherty, T. J., Trans. Soc. Rheol., 3, 137 (1959).
Kuhn, W., Kolloid Z., 132, 84 (1953).
Kumar, G., Shyam, R., Sriram, N., Neelakantan, N. R., and Subramanian, N., Polymer, 34, 3120 (1993).
Kwok, J., Minutes of VAMAS TWP-PB meeting, Berlin, 13 April (1987).
La Mantia, F. P., Acierno, D., and Curto, D., Rheol. Acta, 21, 452l (1982).
La Mantia, F. P., and Acierno, D., Plast. Rubber Process. Appl., 5, 183 (1985 ); Polym. Eng. Sci., 25, 279 (1985).
La Mantia, F. P., Cangialosi, F., Pedretti, U. and Roggero, A., European Polymer, 29, 671 (1994).
La Mantia, F. P., Curto, D., and Acierno, D., Acta Polym., 35, 71 (1984).
La Mantia, F. P., Ed., “Thermotropic Liquid Crystal Polymer Blends,” Technomic Pub. Co., Lancaster (1993).
La Mantia, F. P., Valenza A., and Acierno, D., Polym. Bull., 15, 381 (1986 ); Europ. Polym. J., 22, 647 (1986 ).
La Mantia, F. P., Valenza, A. and Scargiali, F., Polym. Eng. Sci., 34, 799 (1994).
La Mantia, F. P., Valenza, A., Paci, M and Magagnini, P. L., Rheol. Acta, 28, 417 (1989); Polym. Eng. Sci., 30, 7 (1990).
Lacroix, C., Aressy, M. and Carreau, P. J., Rheol. Acta, 36, 416 (1997).
Lacroix, C., Grmela, M. and Carreau, P. J., J. Rheol., 42, 41 (1998).
Larson, R. G., and Fredrickson, G. H., Macromolecules, 20, 1897 (1987).
Larson, R. G., Rheol. Acta, 31, 213, 497 (1992).
Laun, H. M., and Schuch, H., J. Rheol., 33, 119 (1989).
Leal, L. G., Ann. Rev. Fluid Mech., 12, 435 (1980).
Lee, H. M., and Park, O. O., J. Rheol., 38, 1405 (1994).
Lee, S. M., Choi, C. H. and Kim, B. K., Europ. Polym. J., 30, 993 (1994).
Lee, S. Y., and Kim, S. C., Polym. Eng. Sci., 37, 463 (1997).
Lee, Y. K., Jeong, Y. T., Kim, K. C., Jeong, H. M. and Kim, B. Y., Polym. Eng. Sci., 31, 944 (1991).
Leibler, L., Macromolecules, 13, 1602 (1980).
Leonov, A. I., in “Progress in Heat and Mass Transfer,” W. R. Showalter, Ed., Pergamon Press, Oxford (1972); J. Rheol., 34, 155 (1990); ibid., 38, 1 (1994).
Lepoutre, P., M. Eng. Thesis, Dept. of Chemical Engineering, McGill University (1989).
Li, L., Masuda, T., and Takahashi, M., J. Rheol., 34, 103 (1990).
Liang, B.-R., White, J. L., Spruiell, J. E., and Goswami, B. C., J. Appl. Polym. Sci., 28, 2011 (1983).
Liang, K., Grebowicz, J., Valles, E., Karasz, F. E., and McKnight, W. J., J. Polym. Sci.; Part B: Polymer Physics, 30, 465 (1994).
Lim, S. and White, J. L., Polym. Eng. Sci., 34, 221 (1994).
Lin, C.-C., Polym. J., 11, 185 (1979).
Lin, Y. G. and Winter, H. H., Polym. Eng. Sci., 32, 854 (1992).
Lindt, J. T. and Ghosh, A. K., Polym. Eng. Sci., 32, 1802 (1992).
Lipatov, Yu. S., Shumsky, V. F., Gorbatenko, A. N., Panov, Yu. N., and Bolotnikova, L. S., J. Appl. Polym. Sci., 26, 499 (1981).
Liu, T. Y., Soong, D. S., and DeKee, D., Chem. Eng. Commun., 22, 273 (1983).
Lohfink, G. W. and Kamal, M. R., Polym. Eng. Sci., 33, 1404 (1993).
Lohfink, G. W., PhD Thesis, Chemical Engineering Dept., McGill University (1990).
Lord, F. W., UK Pat. Appl., 51,292 (1971).
Luciani, A., Champagne, M. F., and Utracki, L. A., Polym. Networks Blends, 6, 41, 51 (1996a); J. Polym. Sci. B, Polym. Phys. Ed., 35, 1393 (1997).
Luciani, A., PhD. Thesis, Univ. Pierre et Marie Curie, Paris VI (1993).
Lyngaae-Jørgensen, J., and Utracki, L. A., Makromol. Chem., Macromol. Symp., 48/49, 189 (1991).
Lyngaae-Jørgensen, J., in “Multiphase Polymers: Blends and Ionomers,” Utracki, L. A., and Weiss, R. A., Eds., 395 ACS Symposium Series, American Chemical Society, Washington, DC (1989).
Lyngaae-Jørgensen, J., in “Polymer Alloys III,” D. Klempner and K. C. Frisch, Eds., Plenum Press, New York (1983); in Processing, Structure and Properties of Block Copolymers, M. J. Folkes, Ed., Elsevier Applied Science, London (1985).
Lyngaae-Jørgensen, J., Lunde Rasmussen, K., Chtcherbakova, E. A., and Utracki, L. A., Polym. Eng. Sci., 39, 1060 (1999).
Lyngaae-Jørgensen, J., Sondergaard, K., Utracki, L. A., and Valenza, A., Polym. Networks Blends, 3, 167 (1993).
Lyngaae-Jørgensen, J., Thomsen, L. D., Rasmussen, K., Sondergaard, K., and Andersen, F. E., Intl. Polym. Process., 2, 123 (1988).
Malik, T. M., Carreau, P. J. and Chapleau, N., Polym. Eng. Sci., 29, 600 (1989).
Mani, S., Malone, M. F., and Winter, H. H., J. Rheol., 36, 1625 (1992).
Marin, G., PhD thesis, Universite de Pau (1977).
Martinez, C. B., and Williams, M. C., J. Rheol., 24, 421 (1980).
Martischius, F.-D., Rheol. Acta, 21, 311 (1982).
Marvin, R. S., in Viscoelasticity - Phenomenological Aspects, J. T. Bergen, Ed., Academic Press, New York (1960).
Maschmeyer, R. O., and Hill, C. T., Adv. Chem., 134, 95 (1974); Trans. Soc. Rheol., 21, 183, 195 (1977).
Masuda, T., Kitagawa, K., Inoue, T., and Onogi, S., Macromolecules, 3, 116 (1970).
Matsumoto, T., Yao, S., and Onogi, S., J. Rheol., 30, 509 (1986).
Matsuzaka, K., Jinnai, H., Koga, T., and Hashimoto, T., Macromolecules, 30, 1146 (1997).
Maurer, F. H. J., Palmen, J. H. M., and Booij, H. C., Rheolog. Acta, 24, 243 (1985).
Mazich, K. A., and Carr, S. H., J. Appl. Polym. Sci., 54, 5511 (1983).
McAllister, R. A., AIChE J., 6, 427 (1960).
McGeary, R. K., J. Amer. Ceram. Soc., 44, 513 (1961).
Mehta, A., and Isayev, A. I., Polym. Eng. Sci., 31, 963, 971 (1991).
Meir, D. J., J. Polym. Sci., Part C, 26, 81 (1969).
Memon, N. A., J. Applied Polym. Sci., 54, 1059 (1994).
Mertsch, R., and Wolf, B. A., Ber. Bunsenges. Phys. Chem., 98, 1275 (1994).
Metelkin, V. I., and Blekht, V. S., Kolloid. Zhurn., 46, 476 (1984).
Metzner, A. B., J. Rheol., 29, 739 (1985).
Meyer, R. E., Ed., Theory of Dispersed Multiphase Flow, Academic Press, New York (1983).
Michaeli, W., Cremer, M. and Blum, R., Kunststoffe, 83, 992 (1993).
Mighri, F., Ajji, A., and Carreau, P. J., J. Rheol., 41, 1183 (1997).
Mikami, Y., Nihon Reor. Gakk., 8, 3, 137 (1980).
Miles, I. S., and Rostami, S., Eds., Multicomponent Polymer Systems, Longman Sci. & Techn., Harlow (1992).
Milewski, J. V., PhD. Thesis, Rutgers Univ., New Brunswick, NJ (1973).
Milewski, J. V., ACS, Div. Org. Coat. Plast. Chem. Prepr., 38, 127 (1977); Ind. Eng. Chem. Prod. Res. Dev., 17, 363 (1978).
Milewski, J. V., and Katz H. S., Handbook of Reinforcements for Plastics, van Nostrand Reinhold Co., New York, NY (1987).
Miller, R. L., Brooks, R. V. and Briddell, J. E., Polym. Eng.Sci., 30, 59 (1990).
Min, K., PhD thesis, University of Tennessee, Knoxville (1984).
Min. K., White, J. L. and Fellers, J. F., Polym. Eng. Sci., 24, 1327 (1984).
Minale, M., Moldenaers, P., and Mewis, J., Macromolecules, 30, 5470 (1997).
Minana-Perez, M., Jarry, P., Perez-Sanchez, M., Ramirez-Gouveia, M., and Salager, J. L., J. Disp. Sci. Technol., 7, 331 (1986).
Minoura, Y., Ueda, M., Mizunuma, S. and Oba, M., J. Appl. Polym. Sci., 13, 1625 (1969).
Mishra, S. P., and Deopura, B. L., Rheol. Acta, 23, 189 (1984).
Mohr, W. D., Saxton, R. L. and Jepson, C. H., Ind. Eng. Chem., 49, 1857 (1957).
Mondy, L. A., Brenner, H., Altobelli, S. A., Abbott, J. R., and Graham, A. L., J. Rheol., 38, 444 (1994).
Montfort, J. P., Doctorat d’Etat, Universite de Pau (1984).
Mooney, M., J. Colloid Sci., 6, 162 (1951).
Muller, A. J., Balsamo, V., Da Silva, F., Rosales, C. M. and Saez, A. E., Polym. Eng. Sci., 34, 1455 (1994).
Munstedt, H., Polym. Eng. Sci., 21, 259 (1981).
Murty, K. N., and Modlen, G. F., Polym. Eng. Sci., 17, 848 (1977).
Mutel, A. T., and Kamal, M. R., in “Two-Phase Polymer Systems,” Utracki, L. A., Ed., Progr. Polym. Process., Vol. 2, Hanser, Munich (1991).
Nakatani, A. I., Kim, H., Takahashi, Y., Matsushita, Y., Takano, A., Bauer, B. J., and Han, C. C., J. Chem. Phys., 93, 795 (1990).
Nancekivell, J., Canad. Plast., 43(1), 28 (1985); 43(9), 27 (1985).
Nawab, M. A., and Mason, S. G., Trans. Faraday Soc., 54, 1712 (1958); J. Phys. Chem., 62, 1248 (1958); J. Colloid Sci., 13, 179 (1958).
Nemirovski, N., Narkis, M., Salovey, R., Polym. Adv. Technol., 4, 589 (1993).
Ngai, K. L., and Plazek, D. J., Macromolecules, 23, 4282 (1990).
Nguyen, X. Q., and Utracki, L. A., U. S. A. Pat., 5,451,106, 19 Sep 1995, Appl. 08 Aug 1984, to National Research Council of Canada, Ottawa, Canada.
Nicodemo, L., De Cindo, B., and Nicolais, L., Polym. Eng. Sci, 15, 679 (1975).
Nielsen, L. E., Polymer Rheology, Dekker, New York (1977).
Ninomiya, K., and Ferry, J. D., J. Polym. Sci., Part A-2, 5, 195 (1967).
Nishi, M., Watanabe, H., and Kotaka, T., Nihon Reor. Gakk., 9, 23 (1981).
Nishio, T., Sanada, T., and Higashi, K., Sen-i Gakkaishi, 48, 446 (1992).
Nobile, M. R., Acierno, D., Incarnato, L., and Nicolais, L., J. Rheol., 34, 1181 (1990).
Nobile, M. R., Amendola, E., Nicolais, L., Acierno, D. and Carfagna, C., Polym. Eng. Sci., 29, 244 (1989).
Noolandi, J., Polym. Eng. Sci., 24, 70 (1984).
Okoroafor, E. U., Villemaire, J-P., and Agassant, J.-F., Polymer, 33, 5264 (1992).
Oldroyd, J. C., Proc. Roy. Soc., A218, 122 (1953); ibid., A232, 567 (1955).
Onogi, S., and Matsumoto, T., Polym. Eng. Rev., 1, 45 (1981).
Onogi, S., Masuda, T., and Koga, K., Polym. J., 1, 542 (1970).
Onuki, A., and Kawasaki, K., Eds., “Dynamics and Patterns in Complex Fluids,” Springer, New York (1990).
Onuki, A., Phys. A, 140, 204 (1986); Europhys. Lett., 28, 175 (1994); J. Phys.: Condens. Matter, 9, 6119 (1997).
Oosterbroek, M., and Mellema, J., J. Colloid Interface Sci., 84, 14 (1981).
Oosterbroek, M., Lopulissa, J. S. and Mellema, J., in Rheology, G. Astarita, G. Marrucci and L. Nicolais (Eds.), Vol. 2, Plenum Press, New York (1980).
Oosterbroek, M., Mellema, J., and Lopulissa J. S., J. Colloid Interface Sci., 84, 27 (1981).
Otsubo, Y., Nihon Reor. Gakk., 22, 75 (1994).
Ottenbrite, R. M., Utracki, L. A., and Inoue, S., Eds., “Current Topics in Polymer Science,” Hanser Publishers, Munich (1987).
Ottino, J. M., Ranz, W. E. and Macosko, C. W., AIChE J., 27, 565 (1981).
Ouhadi, T., Fayt, R., Jerome, R. and Teyssie, Ph., J. Appl. Polym. Sci., 32, 5647 (1986).
Padwa, A. R., Polym. Eng. Sci., 32, 1703 (1992).
Pal, R., Bhattacharya, S. N., and Rhodes, E., Canad. J. Chem. Eng., 64, 3 (1986).
Pal, R., in “Encyclopedia of Emulsion Technology,” Becher, P., Ed., Marcel Dekker, New York (1996).
Pal, R., J. Rheol., 36, 1245 (1992); ibid., 41, 141 (1997).
Palierne, J. F., Rheol. Acta, 29, 204 (1990).
Pascault, J. P., Frèrejean, V., and Taha, M., Polym. Process. Soc. European Meeting, Strasbourg, 29-31 Aug., 1994.
Patlazhan, S. A., and Lindt, J. T., J. Rheol., 40, 1095 (1996).
Patzold, R., Rheol. Acta, 19, 322 (1980).
Paul, D. R., and Barlow, J. W., J. Macromol. Sci., Rev. Macromol. Chem., C18, 109 (1980).
Percorine, T. J., Herzberg, R. W. and Manson, J. A., J. Mater. Sci., 25, 3385 (1990).
Picart, C., Piau, J.-M., Gailliard, H., and Carpentier, P., J. Rheol., 42, 1 (1998).
Plochocki, A. P., in Polymer Blends, D. R. Paul and S. Newman (Eds.), Academic Press, New York (1978); Polym. Eng. Sci., 23, 618 (1983).
Polios, I. S., Soliman, M., Lee, C., Gido, S. P., Schmidt-Rohr, K., and Winter, H. H., Macromolecules, 30, 4470 (1997).
Prabodh, P., and Stroeve, P., “Break-up of model viscoelastic drops in uniform shear flow,” personal communication by P. Strove, Dept. Chem. Eng., University of California (1991).
Prest, W. M. Jr., and Porter, R. S., J. Polym. Sci., Part A-2, 10, 1639 (1972); Interamerican Conf. Mater. Technol., Mexico (1972 a).
Prieve, D. C., John, M. S., and Koenig, T. L., J. Rheol., 29, 639 (1985).
Princen, H. M., J. Colloid Interface Sci., 91, 160 (1983); ibid., 105, 150 (1985).
Quemada, D., Flaud, P., and Jezequel, P. H., Chem. Eng. Comm., 32, 61 (1985).
Rangel-Nafaile, C., Metzner, A. B., and Wissbrun, K. F., Macromolecules, 17, 1187 (1984).
Ratke, L., and Thieringer, W. K., Acta Metal., 33, 1793 (1985).
Rayleigh, L., Proc. London Math. Soc., 10, 4 (1879); Proc. Roy. Soc., 29, 71 (1879).
Ree, M. C., PhD Thesis, Univ. Massachusetts, Amherst (1987).
Reinelt, D. A., J. Rheol., 37, 1117 (1993).
Reiner, M., J. Rheol., 1, 250 (1930); ibid., 2, 337 (1931).
Rezanova, N. M., and Tsebrenko, M. V., Kompoz. Polym. Materialy, 11, 47 (1981).
Ritter, J., Appl. Polym. Symp., 15, 239 (1971).
Roberts, K. D., MSc Thesis, Washington University, St. Louis (1973).
Roland, C. M., and Bohm, G. G. A., J. Polym. Sci., Polym. Phys. Ed., 22, 79 (1984).
Romankevich, O. V., Zhila, T. I, Zabello, S. E., Sklyar, N. A., and Frenkel, S. Ya., Vysokomol. Soed., A24, 2282 (1982).
Romankevich, O. V., Zhila, T. I., Sklyar, N. A., and Zabello, S. E., Khim. Tekhnol. (Kiev), 1, 9 (1983).
Roovers, J., and Toporowski, P. M., Macromolecules, 25, 1096 (1992).
Roscoe, R., J. Fluid Mech., 28, 273 (1967).
Russel, W. B., in Theory of Dispersed Multiphase Flow, R. E. Meyer, Ed., Academic Press, New York (1983).
Saito, Y., Nihon Reor. Gakk., 10, 123, 128, 135 (1982).
Salager, J. L., Minana-Perez, M., Anderez, J. M., Grosso J. L., and Rojas, C. I., J. Disp. Sci. Technol., 4, 161 (1983).
Sammut, P., and Utracki, L. A., IUPAC Working Party No. 4.2.1. Meeting, Dusseldorf, Nov. 3-6 (1986); Rapport to VAMAS TWP-PB, March (1986); IUPAC W. P. No. 4.2.1. Meeting, Montreal, 1 - 4 Nov. (1987)
Samurkas, T., and Rogers, M. G., Polym. Eng. Sci., 32, 1727 (1992).
Santamaria, A., Munoz, M. E., Pena, J. J., and Remiro, P., Angew. Makromol. Chem., 134, 63 (1985).
Schlund, B., and Utracki, L. A., NRCC/IMRI Symposium “Polyblends-’87”, Boucherville, Que., Canada, 28-29 April 1987; Polym. Eng. Sci., 27, 359, 380 (1987); ibid., 27, 1523 (1987).
Schmidt, L. R., J. Appl. Polym. Sci., 23, 2463 (1979).
Schneider, H. A., and Brekner, M. J., Polym. Bull., 14, 173 (1985).
Schneider, H. A., and Wirbser, J., New Polymeric Materials, 2, 149 (1990)
Scholz, P., Froelich, D., and Muller, R., J. Rheol., 33, 481 (1989).
Schowalter, W. R., Chaffey C. E., and Brenner, H., J. Colloid Interface Sci., 26, 152 (1968).
Schrenk, W. J., Cleereman, K.J. and Alfrey Jr., T., SPE Trans., 3, 192 (1963).
Scott, C. E. and Macosko, C. W., Polymer Bulletin, 26, 341 (1991).
Sebastian, D. H., and Chen, Y.-T., J. Elastom. Plast. 15, 135 (1983).
Serpe, G., Jarrin, J. and Dawans, F., Polym. Eng. Sci., 30, 553 (1990).
Sherman, P., in Rheology of Emulsions, P. Sherman, Ed., Pergamon Press, Oxford (1963); in Emulsion Science, P. Sherman (Ed.), Academic Press, London (1968).
Shi, Z. - H., and Utracki, L. A., Polym. Eng. Sci., 32, 1834 (1992).
Shih, C. K., Polym. Eng. Sci., 16, 198 (1976); in Science and Technology of Polymer Processing, N. P. Suh and N.-H. Sung, Eds., MIT Press, Cambridge, Massachusetts (1979).
Shikata, T., and Pearson, D. S., J. Rheol., 38, 601 (1994).
Silberberg, A., and Kuhn, W., Nature, 170, 450 (1952); J. Polym. Sci., 13, 21 (1954).
Simha, R., and Jain, R. K., Polym. Eng. Sci., 24, 1284 (1984).
Simha, R., and Somcynsky, T., Macromolecules, 2, 342 (1969).
Simha, R., J. Appl. Phys., 23, 1020 (1952).
Skoby, M. H. B., Kops, J. and Weiss, R. A., Polym. Eng. Sci., 31, 954 (1991).
Smith, P., Hara, M., and Eisenberg, A., in “Current Topics in Polymer Science,” R. M. Ottenbrite, L. A. Utracki and S. Inoue, Eds., Hanser Verlag, Munich (1987).
Sobhanie, M., Isayev, A. I., and Fan, Y., Rheol. Acta, 36, 66 (1997).
Søndergaard, K., Valenza, A., and Lyngaae-Jørgensen, J., Polym. Networks Blends, 2 159 (1992).
Speed, C. S., Plast. Eng., 38, 39 (1982).
Spencer, R. S. and Wiley, R. M., J. Colloid Sci., 6, 133 (1957).
Spriggs, T. W., Chem. Eng. Sci., 20, 931 (1965).
Stadler, R., Freitas, L. L., Krieger, V., and Klotz, S., Polymer, 29, 1643 (1988).
Starita, J. M., Soc. Rheol. Trans., 16, 339 (1972).
Steller, R., and Zuchowska, D., J. Appl. Polym. Sci., 41, 1595 (1990).
Stradins, L., and Osswald, T. A., Polym. Eng. Sci., 36, 979 (1996).
Strivens, T. A., J. Colloid Interface Sci., 57, 476 (1976).
Subramanian, P. M., and Mehra, V., Polym. Eng. Sci., 27, 663 (1987).
Subramanian, P. M., Polym. Eng. Sci., 25, 483 (1985).
Suetsugu, Y., and White, J. L., The influence of particle size and surface coating of calcium carbonate on the rheological properties of its suspensions in molten polystyrene, PATRA Report No. 186, June 1982.
Sukhadia, A. M., Done, D. and Baird, D. G., Polym. Eng. Sci., 30, 519 (1990).
Sundararaj, U., Macosko, C. W. and Rolando, R. J., Polym. Eng. Sci., 32, 1814 (1992).
Sundararaj, U., Macosko, C. W., Nakayama, A., and Inoue, T., Polym. Eng. Sci., 35, 100 (1995).
Suzaka, Y., U. S. A. Pat., 4,334,783, Jun. 15 (1982), Appl. 21 Dec 1978, to Showa Denko, Kabushiki Kaisha, Oita, Japan.
Takahashi, H., Inoue, Y., Kamigaito, O., and Osaki, K., Kobunshi Ronbunshu, 47, 7, 611-617 (1990).
Takahashi, Y., Kurashima, N., Noda, I., and Doi, M., J. Rheol., 38, 699 (1994).
Talstoguzov, V. B., Mzhel’sky, A. I., and Gulov, V. Ya., Colloid Polym. Sci., 252, 124 (1974).
Tang, T., and Huang, B., Polymer, 35, 281 (1994).
Tanner, R. I., J. Polym. Sci., A-2, 8, 2067 (1970).
Taylor, G. I., Proc. Roy. Soc., (London), A138, 41 (1932);ibid., A146, 501 (1934).
Thiele, W., in Compounding and Processing for Performance, Proceedings, POLYBLENDS-’95 and SPE RETEC, NRCC/IMI, Boucherville, QC, Canada, 19-20 October 1995.
Thomas, D. G., J. Colloid Sci., 20, 267 (1965).
Tokita, N., Rubber Chem. Tech., 50, 292 (1977).
Tomita, M., and van de Ven, T. G. M., J. Colloid Interface Sci., 49, 374 (1984).
Tomita, M., Takano, K., and van de Ven, T. G. M., J. Colloid Interface Sci., 92, 367 (1982).
Tomotika, S., Proc. Roy. Soc., A150, 322 (1935); A153, 302 (1936).
Tree, D. A., and McHugh, A. J., Intl. Polym. Process., 2, 223 (1988).
Tremblay, B., J. Non-Newtonian Fluid Mech., 33, 137 (1989); Polym. Eng. Sci., 32, 65 (1992).
Tsebrenko, M. V., Jakob, M., Kuchinka, M. Y., Yudin, A. V., and Vinogradov, G. V., Int. J. Polym. Mat., 3, 99 (1974).
Tsebrenko, M. V., Polym. Sci. USSR, 20, 108 (1978).
Tsebrenko, M. V., Rezanova, N. M., and Vinogradov, G. V., Polym. Eng. Sci., 20, 1023 (1980); Nov. Rheol. Polim., 11th Mater. Vses, Simp. Reol., 2, 136 (1982).
Tsebrenko, M. V., Yudin, A. V., Ablazova, T. I., and Vinogradov, G. V., Polymer, 17, 831 (1976).
Tsenoglou, C., J. Polym. Sci.: Polym. Phys. Ed., 26, 2329 (1988).
Utracki, L. A., Kamal, M. R., and Bakerdjian, Z., J. Appl. Polym. Sci., 19, 487 (1975).
Utracki, L. A., Bata, G. L., Tan, V., and Kamal, M. R., Preprints of the 2nd World Congress of Chemical Engineering, Montreal, Quebec, October 5, 1981, 6, 428 (1981).
Utracki, L. A., and Bata, G. L., in “Polymer Alloys III,” D. Klempner and K. C. Frisch, Eds., Plenum Press, New York (1982).
Utracki, L. A., Catani, A. M., Bata, G. L., Kamal, M. R., and Tan, V., J. Appl. Polym. Sci., 27, 1913 (1982).
Utracki, L. A., and Fisa, B., Polym. Comp., 3, 193 (1982).
Utracki, L. A., Kamal, M. R., and Al-Bastaki, N. M., SPETechn. Pap., 30, 417 (1984).
Utracki, L. A., and Lara, J., Polym. Compos., 5, 44 (1984).
Utracki, L. A., Dumoulin, M. M., and Toma, P., Polym. Eng. Sci., 26, 34 (1986).
Utracki, L. A., and Schlund, B., Polym. Eng. Sci., 27, 367 (1987); ibid., 27, 1512 (1987).
Utracki, L. A., and Sammut, P., VAMAS TWP-PB Meeting, Berlin, 13 April (1987); Polym. Eng. Sci., 28, 1405 (1988); Polym. Eng. Sci., 30, 1019 (1990); Polym. Networks Blends., 2, 23, 85 (1992).
Utracki, L. A. and Weiss, R. A., Eds., “Multiphase Polymers: Blends and Ionomers,” Vol. 395, ACS Symp. Ser., Washington, DC. (1989).
Utracki, L. A., and Shi, Z.- H., Polym. Eng. Sci., 32, 1824 (1992).
Utracki, L. A., and Vu-Khanh, T., in “Multicomponent Polymer Systems,” Miles, I. S., and Rostami, S., Eds., Longman Sci. & Techn., Harlow (1992).
Utracki, L. A., J. Colloid Interface Sci., 42, 185 (1973); Proc. 74th AIChE meeting, Los Angeles, Nov. 15-18, 1982; ACS Polym. Prepr., 24(2), 113 (1983); Canad. J. Chem. Eng., 61, 753 (1983)Polym. Eng. Sci., 23, 446 (1983); Polym-Plast. Technol. Eng., 22, 27 (1984); Rubber Chem. Technol., 57, 507 (1984); Polym. Eng. Sci., 25, 655 (1985); Adv. Polym. Technol., 5, 41 (1985); J. Rheol., 30, 829 (1986); J. Rheol., 35, 1615 (1991); unpublished (1992).
Utracki, L. A., “Polymer Alloys and Blends,” Hanser Publishers, Munich (1989).
Utracki, L. A., in “Current Topics in Polymer Science,” R. M. Ottenbrite, L. A. Utracki and S. Inoue, Eds., Hanser Publishers, Munich (1987).
Utracki, L. A., in “Rheological Measurements,” Collyer, A. A., and Clegg, D. W., Eds., Elsevier Appl. Sci., London (1988).
Utracki, L. A., in “Multiphase Polymers: Blends and Ionomers,” L. A. Utracki and R. A. Weiss, Eds., Vol. 395, ACS Symp. Ser., Washington, DC. (1989).
Utracki, L. A., Ed., “Two-Phase Polymer Systems,” Progr. Polym. Process., Vol. 2, Hanser, Munich (1991).
Utracki, L. A., Ed., “Encyclopaedic Dictionary of Commercial Polymer Blends,” ChemTec Publishing, Toronto, Canada (1994).
Utracki, L. A., “The Rheology of Multiphase Systems,” in Rheological Fundamentals of Polymer Processing, Covas, J. A., Agassant, J. F., Diogo, A. C., Vlachopoulos, J., and Walters, K., Eds., Kluver Academic Publishers, Dordrecht (1995).
Utracki, L. A., “Commercial Polymer Blends,” Chapman & Hall, London (1998).
Vadas, E. B., Goldsmith, H. L., and Mason, S. G., J. Colloid Interface Sci., 43, 630 (1973).
Vadhar, P., and Kyu, T., Polym. Eng. Sci., 27, 202 (1987).
Valenza, A., Lyngaae-Jørgensen, J., Utracki, L. A., and Sammut, P., Polym. Networks Blends, 1, 79 (1991).
Van Arsdale, W. E., J. Rheol., 26, 477 (1982).
van de Ven, T. G. M., “Colloidal Hydrodynamics”, Academic Press, New York (1989).
van de Ven, T. G. M., Polym. Compos., 6, 209 (1985).
Van Gisbergen, J. G. M., Hoeben, W. F. L. M. and Meijer, H. E.H., Polym. Eng. Sci., 31, 1539 (1991).
Van Oene, H., J. Colloid Interf. Sci., 40, 448 (1972).
Vincent, M. and Agassant, J. F., Polym. Compos., 7, 76 (1986); in Two-Phase Polymer Systems, Utracki, L. A., Ed., Progr. Polym. Process., Vol. 2, Hanser, Munich (1991).
Vincent, M., Dr. Eng. Thesis, Ecole Nationale Superieure des Mines de Paris, Sophia Antipolis (1984).
Vinckier, I., Moldenaers, P., and Mewis, J., J. Rheol., 40, 613 (1996); ibid., 41, 705 (1997).
Vinogradov, G. V., Krasnikova, N. P., Dreval, V. E., Kotova, E. V., and Plotnikova, E. P., Int. J. Polym. Mat., 9, 187 (1982).
Vlassopoulos, D., Koumoutsakos, A., Anastasiadis, S. H., Hatzikiriakos, S. G., and Englezos, P., J. Rheol., 41, 739 (1997).
Vlassopoulos, D., Rheol. Acta, 35, 556 (1996).
Wakita, N., Polym. Eng. Sci., 33, 781 (1993).
Walling, N., M. Eng. Thesis, Chemical Engineering Dept., McGill University (1995).
Walling, N., and Kamal, M. R., Adv. Polym. Technol., 5, 269 (1996).
Wang, K. J., and Lee, J. L., J. Appl. Polym. Sci., 33, 431 (1987).
White, J. L., Czarnecki, L., and Tanaka, H., Rubber Chem. Technol., 5 823 (1980).
Wieckowski, A., and Streg, F., Chemia Stosowana, 1B, 95 (1966).
Wildemuth, C. R., and Williams, M. C., Rheol. Acta, 23, 627 (1984).
Willis, J. M., and Favis, B. D., Polym. Eng. Sci., 28, 1416 (1988).
Wisniewsky, C., Marin, G., and Monge, Ph., Eur. Polym. J., 21, 479 (1985).
Wolf, B. A., Makromol. Chem., Rapid Commun., 189, 1613 (1980); Macromolecules, 17, 615 (1984).
Wu, D., Tang, N., Gu, D., and Wen, W., Intern. Polym. Process., 5, 47 (1990).
Wu, R., Shaw, M. T., and Weiss, R. A., J. Rheol., 36, 1605 (1992).
Wu, S., J. Polym. Sci., Part B, 25, 557 (1987); Polym. Eng. Sci., 27, 335 (1987); Polymer, 28, 1144 (1987).
Xanthos, M., Young, M. W. and Biesenberger, J. A., Polym.Eng. Sci., 30, 493 (1990).
Yakovlev, K. V., Zhitomirets, R. I., Romankevich, O. V., Zabello, S. E., and Yudin, A. V., Khim. Tekhnol. (Kiev), 5, 14 (1984).
Yalmazer, U., and Kalyon, D. M., J. Rheol., 33, 1197 (1991).
Yang, H. H., Han, C. D., and Kim, J-K., Polymer, 35, 1503 (1994).
Yang, H., Shibayama, H., Stein, R. S., Shimuzu, N., and Hashimoto, T., Macromolecules, 19, 1667 (1986).
Ye, Y.-C., La Mantia, F. P., Valenza, A., Citta, V., Pedretti, U., and Roggero, A., Europ. Polym. J., 27, 723 (1991).
Zaldua, A., Munoz, E., Pena, J. J. and Santamaria, A., Polym. Eng. Sci., 32, 43 (1992).
Zeichner, G. R., and Patel, P. D., 2nd World Congress Chem. Eng., Montreal, QC, Canada, 6, 333 (1981).
Author information
Authors and Affiliations
Editor information
Appendices
Appendices
Rights and permissions
Copyright information
© 2003 Kluwer Academic Publishers
About this entry
Cite this entry
Utracki, L.A., Kamal, M.R. (2003). The Rheology of Polymer Alloys and Blends. In: Utracki, L.A. (eds) Polymer Blends Handbook. Springer, Dordrecht. https://doi.org/10.1007/0-306-48244-4_7
Download citation
DOI: https://doi.org/10.1007/0-306-48244-4_7
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-1114-6
Online ISBN: 978-0-306-48244-1
eBook Packages: Springer Book Archive