1. 20th ASME Conference on Information Storage and Processing Systems, Santa Clara, CA, USA

   • Jen-Yuan Chang
   • Jeffrey S. McAllister

   Editorial 03 May 2011 Pages: 731 - 732

2. Investigation of contact deformation and wear characteristics of discrete track recording media

   • Y. Yoon
   • F. E. Talke

   Technical Paper Open access 11 February 2011 Pages: 733 - 742

   

3. Transient slider-disk contacts in the presence of spherical contamination particles

   • A. Ovcharenko
   • M. Yang
   • F. E. Talke

   Technical Paper Open access 15 January 2011 Pages: 743 - 747

   

4. Complete determination of the dynamic coefficients of coupled journal and thrust bearings considering five degrees of freedom for a general rotor-bearing system

   • Hakwoon Kim
   • Gunhee Jang
   • Sanghoon Lee

   Technical Paper 11 January 2011 Pages: 749 - 759

   

5. Robust design of a HDD spindle system supported by fluid dynamic bearings utilizing the stability analysis of five degrees of freedom of a general rotor-bearing system

   • Myunggyu Kim
   • Gunhee Jang
   • Jihoon Lee

   Technical Paper 31 December 2010 Pages: 761 - 770

   

6. Reduction of aero-acoustic noise originating from a high-speed polygon mirror scanner motor in a laser beam printer utilizing air-flow analysis

   • Y. H. Jung
   • G. H. Jang
   • Yusuf Cinar

   Technical Paper 05 February 2011 Pages: 771 - 776

   

7. Development of a self-propelled microflotilla

   • Hao Li
   • Cheng Luo

   Technical Paper 23 December 2010 Pages: 777 - 786

   

8. Stability analysis of a whirling disk-spindle system supported by FDBs with rotating grooves

   • Jihoon Lee
   • Gunhee Jang
   • Heonjeong Ha

   Technical Paper 23 January 2011 Pages: 787 - 797

   

9. Linear protrusion structure on carriage-arm surface for reduction of flow-induced carriage vibration in hard disk drives

   • Shinji Koganezawa
   • Shinichi Ohtsuka
   • Kei Funabashi

   Technical Paper 17 February 2011 Pages: 799 - 804

   

10. Dynamics of air bearing sliders flying on partially planarized bit patterned media in hard disk drives

    • Liping Li
    • David B. Bogy

    Technical Paper Open access 15 January 2011 Pages: 805 - 812

    

11. The effect of air bearing contour design on thermal pole-tip protrusion

    • Joerg Fritzsche
    • Hui Li
    • Frank E. Talke

    Technical Paper Open access 11 January 2011 Pages: 813 - 820

    

12. Motor noise generation and prediction for high spinning speed hard disk drive

    • F. Gao
    • W. Z. Lin
    • E. H. Ong

    Technical Paper 08 April 2011 Pages: 821 - 829

    

13. Robust embedding of longitudinal position into tape servo signals

    • Roy D. Cideciyan
    • Evangelos S. Eleftheriou
    • Paul J. Seger

    Technical Paper 15 January 2011 Pages: 831 - 839

    

14. 100-nm-Wide track pattern readout using a protruded triangular aperture mounted optical head slider

    • Toshifumi Ohkubo
    • Majung Park
    • Kunio Nakajima

    Technical Paper 10 February 2011 Pages: 841 - 847

    

15. Minute particle detection using a light-wave-guide incorporated optical total analysis system

    • Toshifumi Ohkubo
    • Nobuyuki Terada
    • Yoshikazu Yoshida

    Technical Paper 01 March 2011 Pages: 849 - 856

    

16. LPOS symbol detection by soft-output combining of dual synchronous servo channels in tape drives

    • Giovanni Cherubini
    • Jens Jelitto

    Technical Paper 15 January 2011 Pages: 857 - 862

    

17. An experimental study of the dimple/gimbal interface in a hard disk drive

    • Longqiu Li
    • Edmund Fanslau
    • Frank Talke

    Technical Paper Open access 13 January 2011 Pages: 863 - 868

    

18. A numerical study of the dimple/gimbal interface in a hard disk drive

    • Longqiu Li
    • Hao Zheng
    • Frank E. Talke

    Technical Paper Open access 22 March 2011 Pages: 869 - 873

    

19. Driving mechanisms of CM-scaled PDMS boats of respective close and open reservoirs

    • Xinchuan Liu
    • Hao Li
    • Cheng Luo

    Technical Paper 05 January 2011 Pages: 875 - 889

    

20. Thermal protrusion induced air bearing frequency variations

    • Wei Hua
    • Bo Liu
    • Kang Kee Ng

    Technical Paper 30 January 2011 Pages: 891 - 896

    

21. Experimental study on slider dynamics during touchdown by using thermal flying-height control

    • Yuki Shimizu
    • Junguo Xu
    • Kyosuke Ono

    Technical Paper 10 March 2011 Pages: 897 - 902

    

22. Direct Monte Carlo simulation of air bearing effects in heat-assisted magnetic recording

    • Kyaw Sett Myo
    • Weidong Zhou
    • Wei Hua

    Technical Paper 08 May 2011 Pages: 903 - 909

    

23. Effective mixing in a microfluidic oscillator using an impinging jet on a concave surface

    • Chen-li Sun
    • Chia-Yin Sun

    Technical Paper 17 December 2010 Pages: 911 - 922

    

24. A thin multi-ring negative liquid crystal lens enabled by high-κ dielectric material

    • Chao-Jui Hsu
    • Paul C.-P. Chao
    • Yung-Yuan Kao

    Technical Paper 05 January 2011 Pages: 923 - 929

    

25. Development of piezoelectric MEMS deformable mirror

    • Masashi Sato
    • Shogo Tsuda
    • Osamu Tabata

    Technical Paper 01 January 2011 Pages: 931 - 935

    

26. Servo signal processing for flying height control in hard disk drives

    • Uwe Boettcher
    • Christopher A. Lacey
    • Frank E. Talke

    Technical Paper Open access 07 January 2011 Pages: 937 - 944

    

27. Flexible auto balancer design for the reduction of optical disk drive vibration

    • Seungho Lim
    • Kyungtae Kim
    • Seung Hon Yoo

    Technical Paper 11 January 2011 Pages: 945 - 951

    

28. A novel methodology for quantitative evaluation of scratch-induced magnetic damage in perpendicular magnetic recording disks

    • Masaru Furukawa
    • Junguo Xu

    Technical Paper 15 January 2011 Pages: 953 - 958

    

29. The effect of write current on thermal flying height control sliders with dual heater/insulator elements

    • Hao Zheng
    • Hui Li
    • Frank E. Talke

    Technical Paper Open access 19 January 2011 Pages: 959 - 964

    

30. Experimental study of slider–disk interaction process with thermal-flying-height controlled slider

    • Yansheng Ma
    • Bo Liu

    Technical Paper 11 January 2011 Pages: 965 - 969

    

31. Design of a hybrid optical image stabilization actuator to compensate for hand trembling

    • Choong Kim
    • Myeong-Gyu Song
    • Douk-Young Song

    Technical Paper 14 January 2011 Pages: 971 - 981

    

32. Deformation characteristics of ultra-thin liquid film considering temperature and film thickness dependence of surface tension

    • Hiroshige Matsuoka
    • Koji Oka
    • Shigehisa Fukui

    Technical Paper 18 January 2011 Pages: 983 - 990

    

33. Design of a curved stabilizer with damping orifices for reducing axial run-out of flexible optical disks

    • Ki-Wook Song
    • Abdelrasoul M. M. Gad
    • Yoon Chul Rhim

    Technical Paper 10 February 2011 Pages: 991 - 996

    

34. Analytical read back signal modeling in magnetic recording

    • Uwe Boettcher
    • Christopher A. Lacey
    • Frank E. Talke

    Technical Paper Open access 18 February 2011 Pages: 997 - 1002

    

35. Characterization of slider-lubricant interaction with tribo-current

    • Yijun Man
    • Bo Liu
    • Seh Chun Lim

    Technical Paper 17 February 2011 Pages: 1003 - 1007

    

36. Robust control design for precision positioning of a generic piezoelectric system with consideration of microscopic hysteresis effects

    • Paul C.-P. Chao
    • Pen-Yen Liao
    • Chin-Teng Lin

    Technical Paper 18 February 2011 Pages: 1009 - 1023

    

37. A new energy harvest system with a hula-hoop transformer, micro-generator and interface energy-harvesting circuit

    • Paul C.-P. Chao
    • C. I. Shao
    • C. K. Sung

    Technical Paper 29 March 2011 Pages: 1025 - 1036

    

38. A new two-DOF rotational optical image stabilizer

    • Paul C.-P. Chao
    • Yu-Han Chen
    • Shir-Kuan Lin

    Technical Paper 10 April 2011 Pages: 1037 - 1049

    

39. Humidity effect on head-disk clearance

    • Yuichi Aoki
    • Kenichiro Takahashi
    • Yoshihiko Ooeda

    Technical Paper 21 April 2011 Pages: 1051 - 1056

    

40. Tracking servo method using reflective optical filter for holographic data storage system

    • Hee-Chan Song
    • Nakyeong Kim
    • Young-Pil Park

    Technical Paper 01 May 2011 Pages: 1057 - 1066

    

41. Analysis of slip characteristics between dimple and flexure in hard disk drives

    • Yonghyun Lee
    • Seokhwan Kim
    • Kyoung-Su Park

    Technical Paper 08 May 2011 Pages: 1067 - 1081

    

42. Analysis of sliding mode proximate time-optimal disk drive servo control

    • Seung-Hi Lee
    • Chung Choo Chung
    • Hyun Jae Kang

    Technical Paper 02 May 2011 Pages: 1083 - 1090

    

43. Improved safety mode considering external shock direction for near-field recording system using SIL

    • Hyunwoo Hwang
    • Jung-Gon Kim
    • Young-Pil Park

    Technical Paper 06 May 2011 Pages: 1091 - 1098

    

44. Frequency domain analyses of a thin liquid film surface by repetitively applied stress (dynamic response analyses by the long wave equation)

    • Shigehisa Fukui
    • Kota Hozumi
    • Hiroshige Matsuoka

    Technical Paper 22 January 2011 Pages: 1099 - 1107

    

45. Modeling laser induced lubricant depletion in heat-assisted-magnetic recording systems using a multiple-layered disk structure

    • Lin Wu
    • Frank E. Talke

    Technical Paper 04 May 2011 Pages: 1109 - 1114

    

46. Two simple approaches to fabricate Au microlines on the outer surfaces of micropipettes

    • Hui Wang
    • Yantao Shen
    • Cheng Luo

    Technical Paper 17 December 2010 Pages: 1115 - 1121

    

47. An approach for non-stationary and nonlinear vibration identification and control of active air-bearing slider system

    • Gang Sheng
    • Loulin Huang
    • Suanlin Duan

    Technical Paper 05 January 2011 Pages: 1123 - 1127

    

48. Characteristic evaluation of a solid polymer electrolyte sensor

    • Manabu Otsuki
    • Takeshi Okuyama
    • Mami Tanaka

    Technical paper 19 April 2011 Pages: 1129 - 1133

    

49. Design and implementation of LQG\LTR controller for a magnetic telemanipulation system-performance evaluation and energy saving

    • Moein Mehrtash
    • Mir Behrad Khamesee

    Technical Paper 15 January 2011 Pages: 1135 - 1143

    

50. Design, fabrication and control of a magnetic capsule-robot for the human esophagus

    • Saman Hosseini
    • Moein Mehrtash
    • Mir Behrad Khamesee

    Technical Paper 01 February 2011 Pages: 1145 - 1152