Volume 34, Issue 16

Search all Journal of Materials Research articles

August 2019

Electronic, Photonic and Magnetic Materials; Biomedical Materials, Regenerative Medicine and Drug Delivery; Nanomechanics and Testing; Organic and Hybrid Functional Materials

16 articles in this issue

Preparation, properties, and photodoping behavior of GeS₂-, Ga₂S₃-, and Sb₂S₃-based glasses with excess sulfur and CsCl
Kayo Hosoya
Yomei Tokuda
Kohei Kadono
Electronic, Photonic and Magnetic Materials 01 August 2019 Pages: 2747 - 2756
Enhanced electroluminescence performance of all-inorganic quantum dot light-emitting diodes: A promising candidate for hole transport layer of Cu-doped NiO nanocrystals
Yi-Dong Zhang
Lei Zhao
Electronic, Photonic and Magnetic Materials 01 August 2019 Pages: 2757 - 2764
Effect of Gd³⁺ doping on structural, morphological, optical, dielectric, and nonlinear optical properties of high-quality PbI₂ thin films for optoelectronic applications
Mohd. Shkir
Salem AlFaify
Electronic, Photonic and Magnetic Materials 01 August 2019 Pages: 2765 - 2774
Microstructural evolution and change in macroscopic physical properties of microscale flip chip Cu/Sn58Bi/Cu joints under the coupling effect of electric current stressing and elastic stress
Shui-Bao Liang
Chang-Bo Ke
Xin-Ping Zhang
Electronic, Photonic and Magnetic Materials 01 August 2019 Pages: 2775 - 2788
Simulation studies of Sn-based perovskites with Cu back-contact for non-toxic and non-corrosive devices
Saquib Ahmed
Jalen Harris
Sankha Banerjee
Electronic, Photonic and Magnetic Materials 01 August 2019 Pages: 2789 - 2795
Rapid synthesis of hydroxyapatite nanoparticles via a novel approach in the dual-frequency ultrasonic system for specific biomedical application
Shi-ting Deng
Zi-ting Lin
Yong-guang Bi
Biomedical Materials, Regenerative Medicine and Drug Delivery 01 August 2019 Pages: 2796 - 2806
Characterization and in vitro evaluation of gelatin–chitosan scaffold reinforced with bioceramic nanoparticles for bone tissue engineering
Kanchan Maji
Sudip Dasgupta
Biomedical Materials, Regenerative Medicine and Drug Delivery 01 August 2019 Pages: 2807 - 2818
Collagen and elastin scaffold by electrospinning for skin tissue engineering applications
Josué Jiménez Vázquez
Eduardo San Martín Martínez
Biomedical Materials, Regenerative Medicine and Drug Delivery 01 August 2019 Pages: 2819 - 2827
Nanotexturization of Ti-based implants in simulated body fluid: Influence of synthesis parameters on coating properties and kinetics of drug release
Carlise Hannel Ferreira
Anna Paulla Simon
Mariana de Souza Sikora
Biomedical Materials, Regenerative Medicine and Drug Delivery 01 August 2019 Pages: 2828 - 2836
Potential of electrical discharge treatment to enhance the in vitro cytocompatibility and tribological performance of Co–Cr implant
Amit Mahajan
Sarabjeet Singh Sidhu
Biomedical Materials, Regenerative Medicine and Drug Delivery 01 August 2019 Pages: 2837 - 2847
Application of nonlinear ultrasonic technique to characterize the microresidual strain in metal
Xiao Wang
Jian-Guo Chen
Meng-jian Bao
Nanomechanics and Testing 01 August 2019 Pages: 2848 - 2858
Determination of the true projected contact area by in situ indentation testing
Gaylord Guillonneau
Jeffrey M. Wheeler
Johann Michler
Nanomechanics and Testing 01 August 2019 Pages: 2859 - 2868
Deconvolution of the elastic properties of bivalve shell nanocomposites from direct measurement and finite element analysis
Matthias O’Toole-Howes
Ruth Ingleby
Elizabeth M. Harper
Nanomechanics and Testing 01 August 2019 Pages: 2869 - 2880
A facile preparation of epoxy-polydimethylsiloxane (EP-PDMS) polymer coatings for marine applications
Shatakshi Verma
Sonalee Das
Sanjay Kumar Nayak
Organic and Hybrid Functional Materials 01 August 2019 Pages: 2881 - 2894
Development of new polyimide powder for selective laser sintering
Gleb Vaganov
Andrey Didenko
Irena Lasota
Organic and Hybrid Functional Materials 01 August 2019 Pages: 2895 - 2902
Effect of substrate properties on isothermal fatigue of aerosol jet printed nano-Ag traces on flex
Roshan Muralidharan
Arun Raj
Peter Borgesen
Organic and Hybrid Functional Materials 01 August 2019 Pages: 2903 - 2910

Volume 34, Issue 16

Preparation, properties, and photodoping behavior of GeS₂-, Ga₂S₃-, and Sb₂S₃-based glasses with excess sulfur and CsCl

Enhanced electroluminescence performance of all-inorganic quantum dot light-emitting diodes: A promising candidate for hole transport layer of Cu-doped NiO nanocrystals

Effect of Gd³⁺ doping on structural, morphological, optical, dielectric, and nonlinear optical properties of high-quality PbI₂ thin films for optoelectronic applications

Microstructural evolution and change in macroscopic physical properties of microscale flip chip Cu/Sn58Bi/Cu joints under the coupling effect of electric current stressing and elastic stress

Simulation studies of Sn-based perovskites with Cu back-contact for non-toxic and non-corrosive devices

Rapid synthesis of hydroxyapatite nanoparticles via a novel approach in the dual-frequency ultrasonic system for specific biomedical application

Characterization and in vitro evaluation of gelatin–chitosan scaffold reinforced with bioceramic nanoparticles for bone tissue engineering

Collagen and elastin scaffold by electrospinning for skin tissue engineering applications

Nanotexturization of Ti-based implants in simulated body fluid: Influence of synthesis parameters on coating properties and kinetics of drug release

Potential of electrical discharge treatment to enhance the in vitro cytocompatibility and tribological performance of Co–Cr implant

Application of nonlinear ultrasonic technique to characterize the microresidual strain in metal

Determination of the true projected contact area by in situ indentation testing

Deconvolution of the elastic properties of bivalve shell nanocomposites from direct measurement and finite element analysis

A facile preparation of epoxy-polydimethylsiloxane (EP-PDMS) polymer coatings for marine applications

Development of new polyimide powder for selective laser sintering

Effect of substrate properties on isothermal fatigue of aerosol jet printed nano-Ag traces on flex

Navigation