1. Effects of interlayer properties on the performance of tandem organic solar cells with low and high band gap polymers

   • Zenan Jiang
   • Bobak Gholamkhass
   • Peyman Servati

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2407 - 2415

   

2. Optimization of anti-solvent engineering toward high performance perovskite solar cells

   • Jian Li
   • Ruihan Yang
   • Shibin Li

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2416 - 2424

   

3. Optimized ALD-derived MgO coating layers enhancing silicon anode performance for lithium ion batteries

   • Xia Tai
   • Xifei Li
   • Xueliang Sun

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2425 - 2434

   

4. High-performance supercapacitor electrodes based on NiMoO₄ nanorods

   • Yong Zhang
   • Cui-rong Chang
   • Li-zhen Wang

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2435 - 2444

   

5. Hierarchical mesoporous Zn–Ni–Co–S microspheres grown on reduced graphene oxide/nickel foam for asymmetric supercapacitors

   • Uwamahoro Evariste
   • Guohua Jiang
   • Pianpian Ma

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2445 - 2455

   

6. Pore-graded and conductor- and binder-free FeS₂ films deposited by spray pyrolysis for high-performance lithium-ion batteries

   • Shadi Al Khateeb
   • Taylor D. Sparks

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2456 - 2471

   

7. Enhanced capacitive performance of activated carbon paper electrode material

   • Yibing Xie
   • Yufang Zhou

   Energy Conversion and Storage Materials 01 July 2019 Pages: 2472 - 2481

   

8. Effect of Poisson’s ratio on material property characterization by nanoindentation with a cylindrical flat-tip indenter

   • Zhong Hu
   • Md Mehadi Hassan

   Nanomechanics and Testing 01 July 2019 Pages: 2482 - 2491

   

9. A new nanoindentation creep technique using constant contact pressure

   • Olena Prach
   • Christian Minnert
   • Karsten Durst

   Nanomechanics and Testing 01 July 2019 Pages: 2492 - 2500

   

10. Virtual machine concept applied to uncertainties estimation in instrumented indentation testing

    • Thierry Coorevits
    • Stephania Kossman
    • Alain Iost

    Nanomechanics and Testing 01 July 2019 Pages: 2501 - 2516

    

11. A self-aligning microtensile setup: Application to single-crystal GaAs microscale tension–compression asymmetry

    • Daniele Casari
    • Laszlo Pethö
    • Jakob Schwiedrzik

    Nanomechanics and Testing Open access 01 July 2019 Pages: 2517 - 2534

    

12. Vacuum brazing of TC4 alloy to AlMgB₁₄–TiB₂ ceramic using AgCu filler

    • Shengpeng Hu
    • Yu Lei
    • Yuzhen Lei

    Novel Synthesis and Processing of Metals 01 July 2019 Pages: 2535 - 2542

    

13. Theoretical study on Sn–Sb-based lead-free solder by ab initio molecular dynamics simulation

    • Ye Yuan
    • Xiumin Chen
    • Bin Yang

    Novel Synthesis and Processing of Metals 01 July 2019 Pages: 2543 - 2553

    

14. Effects of stabilization treatment on the precipitation behavior of β phase and stress corrosion for AA5383-H15 alloys

    • Yu-Chih Tzeng
    • Chun-Hsien Lin

    Novel Synthesis and Processing of Metals 01 July 2019 Pages: 2554 - 2562

    

15. Solidification structure evolution of immiscible Al–Bi–Sn alloys at different cooling rates

    • Jinchuan Jie
    • Zhilin Zheng
    • Tingju Li

    Novel Synthesis and Processing of Metals 01 July 2019 Pages: 2563 - 2571