Online first articles
Articles not assigned to an issue 187 articles
-
-
Nonlinear magnetic-induced vibration behavior of axially moving nanoplate
Authors
- Yang Wang
- Xianfeng Cheng
- Trabert Andreas
- Content type: Original Paper
- Published: 15 December 2023
-
Compressive strength prediction of high-performance concrete with utilization of automated least square support vector regression-based algorithm
Authors
- Caoli Lu
- Content type: Original Paper
- Published: 15 December 2023
-
Compressive strength estimation of rice husk ash-blended high-strength concrete using diffGrad-optimized deep learning approach
Authors
- Nhat-Duc Hoang
- Quoc-Lam Nguyen
- Content type: Original Paper
- Published: 15 December 2023
-
Predicting the compressive strength of high-performance concrete employing multi-composed radial-based neural network
Authors
- Honghong Wang
- Content type: Original Paper
- Published: 15 December 2023
-
Prediction of compressive strength of high-performance concrete (HPC) using machine learning algorithms
Authors
- Muhammad Imran
- Ali Raza
- Muhammad Touqeer
- Content type: Original Paper
- Published: 14 December 2023
-
A computational study on efficient yield surface calibrations using a crystal plasticity spectral solver
Authors (first, second and last of 4)
- Arash Imani Aria
- Tomas Mánik
- Knut Marthinsen
- Content type: Original Paper
- Open Access
- Published: 14 December 2023
-
Improvement of recycled aggregate concrete using glass fiber and silica fume
Authors
- Reza Sarkhani Benemaran
- Mahzad Esmaeili-Falak
- Morteza Sadighi Kordlar
- Content type: Original Paper
- Published: 14 December 2023
-
The implementation of a least square support vector regression model utilizing meta-heuristic algorithms for predicting undrained shear strength
Authors
- Shao Qiang
- Ma Chenyue
- Kong Dezhi
- Content type: Original Paper
- Published: 12 December 2023
-
Multi-objective optimization of cancer treatment using the multi-objective gray wolf optimizer (MOGWO)
Authors
- Linkai Chen
- Honghui Fan
- Hongjin Zhu
- Content type: Original Paper
- Published: 12 December 2023
-
Forecasting the productivity of a solar distiller enhanced with an inclined absorber plate using stochastic gradient descent in artificial neural networks
Authors (first, second and last of 6)
- Suha A. Mohammed
- Luttfi A. Al-Haddad
- Sinan A. Al-Haddad
- Content type: Original Paper
- Published: 11 December 2023
-
Modeling energy scheduling in the smart isolated electrical grid based on demand management
Authors (first, second and last of 8)
- Habibullah
- Harikumar Pallathadka
- Ali Hashiem Alsaalamy
- Content type: Original Paper
- Published: 11 December 2023
-
Estimating the ultra-high-performance concrete compressive strength with a machine learning model via meta-heuristic algorithms
Authors
- Bing Liu
- Content type: Original Paper
- Published: 11 December 2023
-
Ensemble learning models to predict the compressive strength of geopolymer concrete: a comparative study for geopolymer composition design
Authors (first, second and last of 9)
- Qiong Tian
- Zhanlin Su
- Jiandong Huang
- Content type: Original Paper
- Published: 10 December 2023
-
Multifractal parameterization of a periodic surface microrelief formed at the face milling. 2. Distribution of elements volume of surface relief
Authors (first, second and last of 8)
- N. Balytska
- L. Penter
- P. Moskvin
- Content type: Original Paper
- Open Access
- Published: 09 December 2023
-
A fast filtering method for digital signals of electronic measuring instruments in the laboratory based on Fourier transform
Authors
- Zhongming Guo
- Rong Chen
- Content type: Original Paper
- Published: 06 December 2023
-
Effect of vibration and welding parameters on spot weld resistance: modeling integrating PSO-ANN and GA algorithm
Authors
- Kamel Bousnina
- Anis Hamza
- Noureddine Ben Yahia
- Content type: Original Paper
- Published: 05 December 2023
-
Utilizing several multivariable mathematical and M5P-tree models to predict uniaxial compressive strength of rocks
Authors
- Hunar Farid Hama Ali
- Content type: Original Paper
- Published: 03 December 2023
-
A CRITIC integrated WASPAS approach for selection of natural and synthetic fibers embedded hybrid polymer composite configuration
Authors (first, second and last of 4)
- V. Kavimani
- Baranitharan Paramasivam
- S. Venkatesh
- Content type: Original Paper
- Published: 01 December 2023
-
Mechanical performance enhancement of recycled aggregate concrete using GGBS and fly ash for sustainable construction
Authors (first, second and last of 5)
- V. V. S. Sarma
- Shaik Subhan Alisha
- K. S. Sai Kumar
- Content type: Original Paper
- Published: 28 October 2023
This is part of 1 collection: -
Numerical modeling of ground surface settlement due to tunneling in urban areas
Authors (first, second and last of 5)
- Dongye Wang
- Yanqing Lin
- Chao Zong
- Content type: Original Paper
- Published: 26 October 2023
This is part of 1 collection: -
New waveform solutions of Calogero–Degasperis (CD) and potential Kadomtsev–Petviashvili (pKP) equations
Authors
- Rui Cui
- Content type: Original Paper
- Published: 08 October 2023
This is part of 1 collection: -
Evaluation of the initial and total fracture energy of concrete: novel hybrid SVR analysis
Authors
- Yueshu Li
- Cong Li
- Mingyuan Yuan
- Content type: Original Paper
- Published: 21 September 2023
This is part of 1 collection: -
Computational modelling of collagen-based flexible electronics: assessing the effect of hydration
Authors
- Shirsha Bose
- Elisa Mele
- Vadim V. Silberschmidt
- Content type: Original Paper
- Open Access
- Published: 30 August 2023
This is part of 1 collection: -
Utilizing bottom ash, lime and sodium hexametaphosphate in expansive soil for flexible pavement subgrade design
Authors
- Shiwani Rana
- Sandeep Singh
- Abhishek Sharma
- Content type: Original Paper
- Published: 15 August 2023
This is part of 1 collection: -
Investigating the effect of graphene oxide on the physical and mechanical properties of high-strength rubberized concrete using RStudio
Authors
- Gyanendra Kumar Chaturvedy
- Umesh Kumar Pandey
- Content type: Original Paper
- Published: 14 August 2023
This is part of 1 collection: -
Detection of press section felt roll instabilities by analyzing pressure variation and vibration measurements
Authors (first, second and last of 4)
- Kartik Kamepalli
- Vinod B. Hiwase
- Lalit N. Patil
- Content type: Original Paper
- Published: 10 August 2023
This is part of 1 collection: -
Design of a new model predictive control for Lipschitz non-linear delayed switched systems with application to water pollution system
Authors
- Yanjie Ma
- Xuesong Hui
- Content type: Original Paper
- Published: 09 August 2023
This is part of 1 collection: -
Pressure redistribution in additively manufactured composite prosthesis by architecture control
Authors
- Daria A. Dolgikh
- Mikhail A. Tashkinov
- Vadim V. Silberschmidt
- Content type: Original Paper
- Published: 05 August 2023
This is part of 1 collection: -
Estimation of load capacity of driven piles by COA–MLP and COA–SVR models: a comparative study
Authors
- Yuhua Song
- Content type: Original Paper
- Published: 26 July 2023
This is part of 1 collection: -
Optimal reconfiguration of electric distribution networks in the presence of DG resources based on a cascaded chaotic fruit fly optimizer
Authors
- Hongyang Zhang
- Content type: Original Paper
- Published: 17 July 2023
This is part of 1 collection: -
Numerical analysis of encased granular pile with vertical hollow steel pipe
Authors
- Ravikant S. Sathe
- Jitendra Kumar Sharma
- Content type: Original Paper
- Published: 15 July 2023
This is part of 1 collection: -
Employing the hybrid RBF prediction algorithm to predict the failure energy properties of concrete
Authors
- Yi Chi
- Content type: Original Paper
- Published: 26 June 2023
This is part of 1 collection: -
High-temperature behaviour and interfacial damage of CGI: 3D numerical modelling
Authors
- Minghua Cao
- Konstantinos P. Baxevanakis
- Vadim V. Silberschmidt
- Content type: Original Paper
- Open Access
- Published: 26 June 2023
This is part of 1 collection: -
Day-ahead energy management in smart homes with demand response and electric vehicle participation
Authors
- Ling Pan
- Content type: Original Paper
- Published: 21 June 2023
This is part of 1 collection: -
Geotechnical properties of bentonite mixed with nanosilica
Authors
- Vaibhav Chaudhary
- Jitendra Singh Yadav
- Rakesh Kumar Dutta
- Content type: Original Paper
- Published: 18 June 2023
This is part of 1 collection: -
Morphological evolution and strength performance of green-aluminium-7075 hybrid composites modeled by response surface analysis
Authors (first, second and last of 6)
- Olanrewaju Seun Adesina
- Abayomi Adewale Akinwande
- Valentin Romanovski
- Content type: Original Paper
- Published: 03 June 2023
This is part of 1 collection:
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more